to skip it entirely and go back to testing existing
configuration, or try to fight through it and possibly waste a lot of time?
Alot of questions, I know. hopefully this will spark a good debate on lab
strategy :)
Adam Compton
com...@gmail.com
CCNP,CCDP CCIE Voice Written exam
!
On Wed, Feb 23, 2011 at 9:57 PM, adam compton com...@gmail.com wrote:
All:
I've been studying for the lab for about a year, and I'm taking the Lab on
March 9th in RTP. I've set aside 11 full days of nothing but labbing right
before the test, in addition to the labbing I've already done
Just wanted to add, that I had the same problem on voice rack 26 today. I
had the 8 to 4 EST session
On Sun, Feb 27, 2011 at 4:13 PM, Vik Malhi vma...@ipexpert.com wrote:
I'll check the Scripts. For the time being putt the remote site In a UCM
Group with sub only and stop the Sub UCM
I see the requirement for preventing UC to answer calls that it originated,
but can't find much on the requirement. Is there a certain way to do this?
Is it done by default?
Adam Compton
___
For more information regarding industry leading CCIE Lab
On Tue, Mar 1, 2011 at 8:54 PM, adam compton com...@gmail.com wrote:
The 7961's will do and the 7962 would be the best. Honestly, I've been
able to get by pretty with with one 7962, 3 7942s, and and 2 7960s. I'm
lucky enough to have a bunch of phones just lying around though :). If
you're
Conference requires dedicated DSPs. If you still have MIPS left over on a
DSP because you don't have many T1 channels, you can use them for
Transcoding, but not for Conference.
Adam Compton
2011/3/2 voice boy voice...@hotmail.com
Hi,
I'm confused about configuring these parameters when
:
Hi
I am thinking about buying 4 7942 and I already have 4 7960.
What you think will it be enough for my ccie lab prep.
I have a home lab.
On Tuesday, March 1, 2011, adam compton com...@gmail.com wrote:
On Tue, Mar 1, 2011 at 8:54 PM, adam compton com...@gmail.com wrote:
The 7961's
The best answer is to set it to whatever the lab says to set it to. In the
reality, Subscriber = local, National = LD, international international for
North American Dial Plan. In the lab, different country may require all in
country calls to be subscriber, or all in country calls to be
If you run debug isdn q931 on the gateway the call is going out, you can
confirm what Call Manager is sending to the PSTN.
On Thu, Mar 3, 2011 at 1:52 PM, Ccie Voice v.c...@yahoo.com wrote:
Thank you all for your reply,
I just need to know if the PSTN router in the LAB will accept the call
as the admin account.
JTAPI user is cue password cue with CTI enabled, 2 CTI Ports attached, and 1
CTI Route Point attached to it.
I will add that I am using proctorlabs remote labs.
Adam Compton
___
For more information regarding industry leading CCIE Lab
?
On Fri, Mar 4, 2011 at 3:44 PM, adam compton com...@gmail.com wrote:
I've been having a lot of trouble getting CUE and CUCM to work together
with the initialization wizard. When I put in the Web user and Jtapi
credentials, the CUE GUI hangs for like 10 minutes and says that one or the
other isn't
Yeah I've had this problem before. First off, you have to configure it on
both sides for it to come back up. It usually comes right back up once you
run auto qos voip fr-atm on both sides. If it doesn't, wr mem and reboot
both routers should fix it.
In proctorlabs, I haven't had to reboot the
What do you get when you run debug ephone moh?
2011/3/5 Roger Källberg roger.kallb...@cygate.se
Hi,
Two things, remove the interface bind from ccm-manager music-on-hold bind
Loopback0 and increase the number of ephones under telephony-service. You
have max-ephones 3, I always had this set
utils dbreplication status - checks status in the CLI of CUCM
utils dbreplication repair - repairs dbreplication.
On Sun, Mar 6, 2011 at 5:40 PM, CCIE for Me cciefo...@hotmail.com wrote:
you can look at cisco unified reporting (drop down menu). Also run, rtmt
and look at the database
Not counting how many work for cisco. Plus, that is WORLDWIDE!! Even the
US which has the highest concentration of CCIEs has somewhere between 6000
and 7000.
On Sun, Mar 6, 2011 at 10:23 PM, Shrini linuxbos...@gmail.com wrote:
IMO look at CCIE Voice experts count .. ~ 1500 worldwide as of
in 30
days.
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
!
Adam Compton
On Thu, Mar 10, 2011 at 8:58 AM, adam compton com...@gmail.com wrote:
Just giving everybody a status report. I failed the Voice lab yesterday.
I'm really bummed out. It's not that I failed that bums me out. It's that
a lot of areas I though I nailed, I got 0 percent. It's going
-- Forwarded message --
From: adam compton com...@gmail.com
Date: Fri, Mar 11, 2011 at 9:00 AM
Subject: Re: [OSL | CCIE_Voice] I failed because of MGCP issue- need help
To: Support supp...@technisha.com
Did you have the MGCP control binded to the loopback or another interface
to make this work?
Thanks for you help!
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
All,
I have a very specific thing I am trying to do with Call forward
unregistered. When the call comes into the SRST phone it should show the
for and by fields. This field should have the e.164 number of the phone
instead of the extension number.
So, I can configure Redirecting ie elements on
-- Forwarded message --
From: adam compton com...@gmail.com
Date: Fri, Mar 11, 2011 at 10:35 AM
Subject: Re: [OSL | CCIE_Voice] Backup Route Group in a Route List with H323
To: George Goglidze gogli...@gmail.com
Thanks George! I'm going to try that in the lab this weekend
After George's suggestion, I found a pretty good blog about this exact
topic:
http://ccierants.blogspot.com/2010/07/call-routing-redundancy-stuff.html
A definite must-read.
On Fri, Mar 11, 2011 at 10:35 AM, adam compton com...@gmail.com wrote:
-- Forwarded message --
From
-- Forwarded message --
From: adam compton com...@gmail.com
Date: Fri, Mar 11, 2011 at 12:58 PM
Subject: Re: [OSL | CCIE_Voice] 8.9 magnitute Earth Quake hit North Japan
-CCIE Candidates in Japan please take note.
To: lakpr...@gmail.com
I would also like to inform engineers out
You have to have to have an outbound dial-peer to the remote gateway in that
scenario. I don't think the VIA would work going to a remote zone
gatekeeper, but I could be wrong. I know you can use hopoff as well.
On Fri, Mar 11, 2011 at 2:03 PM, Rahul Kapor rahul.kapo...@gmail.comwrote:
Hi
384k 480 768k 960
On Thu, Mar 17, 2011 at 12:59 PM, Naoufal Kerboute
naou...@mhdinfotech.comwrote:
I guess you can keep 960
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Friderich Claude
*Sent:* Thursday, March 17, 2011
I have to disagree with you on the worth. First of all, the best investment
that will give you the most return is always education.
While I don't have my CCIE yet, I make pretty good money. The jobs that I
see posted here in the US start in the 6 figures with a CCIE. In IT, it can
be hard to
images.
When you go there it should try to download the list.xml and the images.
Adam Compton
On Sat, Mar 19, 2011 at 2:04 PM, Justin Brady jbr...@tsginc.biz wrote:
I’m looking for the best methodology of loading background images onto
CME phones. Let’s “assume” the PC I’m using doesn’t have
I'm sure a lot of you have seen this document, but I thought I would share
it to anyone who hasn't seen it:
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml
This document has the best descriptions of all of the 3750 QOS features I
have seen.
I remember labbing in the past and my CSSs disappear off of my phones. It's
happened once or twice, and I assumed that i must have checked the wrong
thing in the BAT tool. Then I just watched Vik's video volume 10 task 2.2
and the same thing happened to him! Has anybody seen any errors like
Gregg,
I'm kind of in the same boat as you. To me it seems like it would be easier
to use the line/device approach. I was assigning internal css to the line
and all other to the device. That seems to have sped up my time in working
with CSSs, but I would also like to hear some other opinions.
-profile
on the voice-port, but in the back of my head, I feel i must be doing
something wrong on the Call Manager side of things.
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Well, I might have found my answer:
http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=8;t=002862
Poster says that h323 gateways can't process the plus. Can anyone confirm?
Adam Compton
On Wed, Mar 23, 2011 at 8:15 PM, adam compton com...@gmail.com wrote:
I'm using external
:
The + gets stripped by the voip dial-peer. You will always have to add
the
+ back when sending to a H323 or SIP gateway.
-Adam
On Wed, Mar 23, 2011 at 8:19 PM, adam compton com...@gmail.com wrote:
Well, I might have found my answer:
http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb
like that, going from memory so don't remember
exactly) that should show enabled/on once it stops trying to register to a
server. you can make sure fallback-mgcp is enabled while the MGCP gateway
is up as well. show ccm-manager would say enable/off in this case
Hope this helps.
Adam Compton
than CUBE and Gatekeeper calls, is there anything else that would
require MTP that anybody knows about? I'm assuming this hairpinning call
would fall under the CUBE category since in comes in the gateway and goes
back out.
Adam Compton
On Fri, Mar 25, 2011 at 4:50 PM, study2b ccie study4ccievo
You MUST have a css on the MVA. if other extensions are int the none
partition, it probably doesn't matter what is in the CSS, but you have to
have one assigned.
Adam Compton
On Sat, Mar 26, 2011 at 11:04 PM, CCIE for Me cciefo...@hotmail.com wrote:
Hi All,
Has anyone else gotten MVA
I'm actually doing that lab right now :)
Make sure that use device pool calling transformation css is not checked
and assign the css to the phone. Reboot the phone. Might require a no mgcp
and mgcp on the gateways.
On Sun, Mar 27, 2011 at 10:50 AM, George Goglidze gogli...@gmail.comwrote:
Hi
, it wouldn't have worked correctly once all registered to
Publisher... config error but it does as I mentioned in my e-mails.
Thanks,
On Mon, Mar 28, 2011 at 3:51 AM, adam compton com...@gmail.com wrote:
I'm actually doing that lab right now :)
Make sure that use device pool calling
Do you see the CBarge softkey but the conference gives you a busy signal? or
is it that CBarge doesn't show up at all?
One thing I can think is to make sure the dspfarm is registered to the
correct SCCP ccm group. in a SRST scenario, you would probably need a sccp
ccm group for call manager and
this with no
luck. I've watched every video I know of in the IPexpert catalog, and
nothing references it that I've seen. Any help would be appreciated,
because i am at my wits end on this one.
Adam Compton
___
For more information regarding industry
below without (1...) or +
From
(5001)
For: 16178631001
by : 16178631001
I don't know other solution, anyone out there with an idea?
On 31 March 2011 19:04, adam compton com...@gmail.com wrote:
All,
I am desperately seeking help on how to alter the For and By fields on a
CFUR
...). I've never hated parentheses more!
Adam Compton
On Fri, Apr 1, 2011 at 2:44 AM, Rogers Ochieng rogersochi...@gmail.comwrote:
1. Created pt-cfur
2. Create css-cfur
3. Create rl-cfur with the HQ gateway, no RL/RG manipulation
4. Create RP \+1.6178631XXX, pedot and check ENPM
5
One more thing to add. I'm running 12.4T24 on 2801 routers if that matters.
On Fri, Apr 1, 2011 at 5:00 PM, adam compton com...@gmail.com wrote:
Roger,
What is ENPM?
Thanks for all the suggestions. I've tried MGCP and H323 gateways,
vm-profile, and still can't get it to show up
Don't forget the CME compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme71spc.htm
This link has which phone loads you should use for 7.1
Adam Compton
On Mon, Apr 4, 2011 at 7:31 PM, Bill Lake whl...@gmail.com wrote:
http://www.cisco.com/en/US
Correct. I had a customer service fiasco because I bought a bunch of tokens
from them and ended up not being able to get a graded lab. It seems to me
there is a demand for graded labs, why hasn't IPExpert stepped up and
offered something like this?
On Tue, Apr 5, 2011 at 8:00 PM, Bill Lake
Make sure to bind control and media to the source address:
voice service voip
sip
bind all source-interface
Also, you need tftp-path command. you should be able to look in flash and
see your config files.
Adam
On Wed, Apr 6, 2011 at 7:50 PM, Erwan Erwan e_er...@yahoo.com wrote:
hi
I've had the same problem. I never knew what to think of it. I assumed
that's just how it works.
On Sat, Apr 9, 2011 at 2:57 PM, Miron Kobelski findko...@gmail.com wrote:
Hello,
I was playing with CME SRST today and I encountered the same issue again. I
configured CME SRST with srst mode
that
expands to the PSTN number for voicemail. Turn on Redirect IE delivery
for inbound calls on the HQ gateway. Redirect IE element will now include
the BR2 SRST phone's extension when sent over the PSTN.
Adam Compton
On Mon, Apr 11, 2011 at 12:47 AM, ShinGei Yong shingei.y...@gmail.comwrote:
Hi all
and
destination.
Adam Compton
On Mon, Apr 11, 2011 at 4:25 AM, lee huntl huntc...@gmail.com wrote:
Dear all,
I am having trouble to determine what is *Accumulative Delay* means for
Cisco VoIP.
When reading CCO documentation, I kept on coming across this term called
*Accumulative Delay
Time could be wrong on the Router itself. do show clock to determine the
router's time.
On Sun, Apr 10, 2011 at 6:20 AM, Shrini linuxbos...@gmail.com wrote:
I changed time-zone to 8 and then did no create cnf / create cnf and
restart all.
But still the time-zone is incorrect. Both are skinny
How do you purchase that? Do you know the price?
Adam Compton
On Fri, Apr 22, 2011 at 11:28 AM, ee 55 f.faraday...@gmail.com wrote:
hi ,
is anybody used cisco voice 360 graded lab before ? just wondering ,worth
to spend money on ?
tks
. You can find more info on my
blog.
JR
www.joshreola.com
On Fri, Apr 22, 2011 at 1:06 PM, adam compton com...@gmail.com wrote:
How do you purchase that? Do you know the price?
Adam Compton
On Fri, Apr 22, 2011 at 11:28 AM, ee 55 f.faraday...@gmail.com wrote:
hi ,
is anybody used cisco
You seem to be hitting the bug when you bind MGCP to the loopback
interface. There are 2 ways around it. 1. do like stated above and reload
the router. 2. remove the mgcp bindings to register, then add the bindings
back.
Adam Compton
On Sun, May 1, 2011 at 7:43 PM, Ahmed Ellboudy
ahmed_ellbo
Thanks Bill!
On Thu, May 5, 2011 at 10:02 PM, Bill Lake whl...@gmail.com wrote:
Lots were talking about graded labs recently.
Michelle over at CCBootCamp has the Cisco 360 labs at $400 each.
Contact her at miche...@ccbootcamp.com to get yours set up.
Great stuff! this might help in the ever elusive remote gatekeeper
troubleshooting question everybody seems to be getting.
On Sat, May 7, 2011 at 7:24 AM, Miron Kobelski findko...@gmail.com wrote:
Hi,
Internal Error Codes provide very useful troubleshooting tool for IOS
gateways. IEC is
everytime. It's
getting really frustrating because this is an area I need some time in.
Does anybody have any good ideas on getting that running locally by itself?
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
I finally figured it out! I put a created a MS loopback interface and gave
it ip address 10.10.210.5 and it came right up!!! I've been wrestling with
this forever!! Talk about a hack.
Adam Compton
On Mon, May 9, 2011 at 8:34 AM, adam compton com...@gmail.com wrote:
All,
I'm having a hell
:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *adam compton
*Sent:* Monday, May 09, 2011 8:35 AM
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL | CCIE_Voice] UCCX script editor in standalone mode
All,
I'm having a hell of a time
can you post your show gatekeeper gw? The HQ gateway should be registered
in the VIA zone.
On Thu, May 12, 2011 at 9:46 PM, Cristobal Priego cristobalpri...@gmail.com
wrote:
hello all
i have the following question hopefully you can let me know what my error
is
GK between UCM and CME
I have a 3560-24PS switch and 3 FACTORY SEALED cisco glc-sx-mm SFPs for
sale. $1000 for all. Email me if you are interested.
Adam Compton
com...@gmail.com
___
For more information regarding industry leading CCIE Lab training, please visit
I know you can assign a Called Party Transformation CSS to a gateway to
manipulate the way calls go out of the gateway. What can you do with a
Called Party Transformation CSS assigned to a phone?
Adam Compton
___
For more information regarding industry
I think BLF speed dial can monitor a phone at a different location. Monitor
can't. You still have to program Presence on the CME gateway to get that to
work though.
On Wed, May 18, 2011 at 11:30 AM, Michael Luo hout...@gmail.com wrote:
On CME phone, we have different ways to monitor another
You are correct. I don't know why I thought is was on the phones too.
On Tue, May 17, 2011 at 9:54 PM, Randall Saborio ill2...@gmail.com wrote:
That doesnt exist for IP Phones.
On Tue, May 17, 2011 at 6:01 PM, adam compton com...@gmail.com wrote:
I know you can assign a Called Party
I was messing around with Called party transformations today on MGCP
gateways and I noticed some different behavior than I thought would happen.
If I use Called Party Transformation for manipulating digits and RP for the
display of the phone, the RP settings change the phone display while the
know that if the switch-type is wrong,
you may experience weird behavior with calls. Wrong switch-type won't
necessarily break all calls. That could cause the temporary failure
message as well.
Adam Compton
com...@gmail.com
On Wed, May 25, 2011 at 8:35 PM, Bill Lake whl...@gmail.com wrote
it.
Adam Compton
com...@gmail.com
On Sat, May 28, 2011 at 11:58 AM, Leslie Meade lme...@signal.ca wrote:
Is it me or we experiencing issues opening the secure PDF's today.
I have tried multiple machines and I am getting a blank document. ( I have
open file installed). The PDF's open just fine
10.10.110.3 any
access-list 150 deny ip host 192.168.10.18 any(local phone ip address)
access-list 150 permit ip any any
apply as follows:
int fa0/0.30
ip access-group 150 out
You will need to bind MGCP to the loopback interface, but that's required
half the time anyway.
Adam Compton
interfaces between HQ and BR1, but nothing else on HQ or BR2.
Adam Compton
On Sun, May 29, 2011 at 11:44 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
hello all
while doing a mock lab
i needed to configure LLQ, MLP LFI cRTP between BR1 and HQ, the bw was 384
when i issued auto qos voip
is in a
dialable format from the phone. If it uses the RDP CSS, then I could
potentially have to create another route pattern.
Thoughts?
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you
default to 56k in frame-relay traffic shaping. Let's assume nothing is
asked for QOS on the SiteC connection.
My instinct is to configure the bandwith on the SITE C link to 1544 so that
the link will not be affected. Am I using the correct value for this
scenario?
Adam Compton
Stacking. That's about it
On Wed, Jun 1, 2011 at 11:08 AM, josh west west32...@gmail.com wrote:
I need a switch for my lab and ideally would like to have a 3750 but from
what I am reading the 3560 is very similar for what is needed on the voice
lab. Can anyone confirm this or tell me what a
80 412
*E*mail**
*cfrider...@netcore.lu x...@netcore.lu***
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Roger Carpio
*Sent:* mercredi 1 juin 2011 17:21
*To:* adam compton
*Cc:* ccie_voice@onlinestudylist.com
*Subject
I get those commands on my 3560. are you running advanced ip services on
the 3560?
On Wed, Jun 1, 2011 at 12:15 PM, Cristobal Priego cristobalpri...@gmail.com
wrote:
i have a 3560 and i notice a difference yesterday on the QoS
if you run auto QoS on the 3560 it will not configure the
it
i need to check the ios, i'm not home now
2011/6/1 adam compton com...@gmail.com
I get those commands on my 3560. are you running advanced ip services on
the 3560?
On Wed, Jun 1, 2011 at 12:15 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
i have a 3560 and i notice
What are the best MGCP debugs to run?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
without any options uses US daylight savings time dates, but not
sure if those would apply to other timezones as well. As best I can tell,
I've heard of Hong Kong and UK and US as sites.
Regards,
Adam Compton
___
For more information regarding industry
the subnet
mask of the loopback interface?
Regards,
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
would
absolutely want to use called party transformation.
Does it make plus dialing manipulation easier?
Regards,
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE
On Wed, Jun 1, 2011 at 9:43 PM, adam compton com...@gmail.com wrote:
I had bad luck asking the proctor last time around. I told them I
interpret wording that SCCP is used for registration and he just blew me off
with whatever it says. i watch ipexpert and they say ask the proctor ask
255.255.255.254
service-module ip default-gateway 10.10.240.3
ip route 10.10.240.3 255.255.255.255 interface Service-Engine1/0
Can I get my number now?
Sam
On Wed, Jun 1, 2011 at 9:23 PM, adam compton com...@gmail.com wrote:
I've got a weird requirement for configuring a CUE module
Worked exactly like you said this morning. I know this could potentially be
a question on the test, so this is a good method that doesn't involve
changing anything with the routing.
Thanks!
Adam Compton
On Wed, Jun 1, 2011 at 11:28 PM, Sam Park upperlevelpark...@gmail.comwrote:
Adam;
Been
statement since it is
a network that ospf can see.
Sam.
On Thu, Jun 2, 2011 at 8:58 AM, adam compton com...@gmail.com wrote:
Worked exactly like you said this morning. I know this could potentially
be a question on the test, so this is a good method that doesn't involve
changing anything
from my iPhone
On Jun 1, 2011, at 6:23 PM, adam compton com...@gmail.com wrote:
I've got a weird requirement for configuring a CUE module. Normally you
use ip unnumber interface, configure IP and your done. I have a loopback
at 10.10.240.1 255.255.255.255 mask. I need to configure the CUE
I have a switch qos item I am not sure how to address:
When queue 2 reaches 60% capacity COS 4 packets should be dropped.
COS 4,6,7 is mapped to queue 2. any ideas?
Adam Compton
___
For more information regarding industry leading CCIE Lab training
packets are dropped starting at threshold 1 – 60%).
cheers, sd
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *adam compton
*Sent:* Thursday, June 02, 2011 1:10 PM
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL
AAR does not apply to route-patterns. AAR is for when you call another
extension and you get out of bandwidth.
But you might want to check your service paramaters for Stop Routing on Out
of Bandwidth Flag. This should be set to False.
On Fri, Jun 3, 2011 at 7:04 AM, Cisco Voice Mailing List
. Everytime I think I got it right I stumble on
something like this.
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Note to self. Don't read 2 different labs at the same time.
I screwed up the MVA extensions in CUCM
On Fri, Jun 3, 2011 at 10:46 AM, adam compton com...@gmail.com wrote:
I am trying to setup mobile voice access and can't seem to get it to work
today. I can call in to MVA, it detects my
I haven't been using these commands under the serial interface of a T1, but
I see them in answers to questions on some vendors guides:
serial 0/0/0:23
isdn sending-complete
isdn sending-alert
Do we need to have these commands? Why would you need these commands in a
PRI config?
Adam Compton
Any instance of failover, it is good to have set to false. I was having
trouble with a H323 failover before I discovered it. It seemed to make it
work every time.
On Sat, Jun 4, 2011 at 2:52 PM, Ki Wi kiwi.vo...@gmail.com wrote:
under what situation we will need this?
However, today i
CUE licensing is on the CUE itself. Other than making sure your programming
matches what was already on the CUE in the Router. you should be good. I've
changed to other boxes before, but I always did a factory reset. Factory
resets don't remove the license.
On Sat, Jun 4, 2011 at 6:15 PM,
A is Frame Relay traffic shaping and the other is class based shaping.
On Sat, Jun 4, 2011 at 7:12 PM, Michael Luo hout...@gmail.com wrote:
I was trying to understand if the two configuration below achieve the same
thing. If not, what's the difference?
Configuration A:
map-class
and Unified Communications IP Telephony Call Control Cisco
Unified Communications Manager (CallManager) Maintain and Operate
Maintain and Operate Guides Cisco Unified Communications Manager 7.0 TCP
and UDP Port Usage
Regards,
Adam Compton
___
For more
was wondering what the chances are to get the same lab twice. If
you take a lab, is it pretty much disqualified from you repeating it?
Adam Compton
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I know what you mean. I thought I nailed QOS 100% and got a zero.
On Wed, Jun 8, 2011 at 3:04 AM, Chris Green voice5...@yahoo.com wrote:
Hi All,
I just got my fail result, and what it shocked me is the Call Routing mark
for 40% while I am sure I done what was asked for and I tested as
Also, you have to reset TFTP service if it is running. It serves the old
file until you do. Be prepared to do this task on the SUB as well. I
wouldn't recommend changing the tftp, because then you have to change your
DHCP option and reset the phones, then change back You could burn some
I'm with you man. I can do it, but that sure eats up a lot of time.
On Wed, Jun 8, 2011 at 7:56 AM, Rahul Kapor rahul.kapo...@gmail.com wrote:
Hi All,
want to achieve following scenario :
when directory button is pressed for
message No service configured should be seen on phone
Worked hear as well!
On Wed, Jun 8, 2011 at 8:57 AM, Rahul Kapor rahul.kapo...@gmail.com wrote:
It worked !!! :)
awesome Vinay
On Wed, Jun 8, 2011 at 6:18 PM, Vinay Kumar6 vinayjaisw...@in.ibm.comwrote:
On the Phone, Make *Service Provisioning* as *Externa*l, from the
Enterprise
You can add services with BAT?
On Wed, Jun 8, 2011 at 1:20 PM, cciefo...@hotmail.com wrote:
You have delete the enterprise services and then re add them as regular
services. Then add them all as new service to the phones that need it using
BAT. THAT'S IT.
-Original Message-
What a deal!
On Wed, Jun 8, 2011 at 2:54 PM, CCIE Voice cc...@corb.net wrote:
If anyone is interested in one-on-one private coaching/tutoring for CCIE
voice, send me a private message.
Must have sat at least once, attended IPE boot-camp or 1-week lab
experience or be fairly far along in
1 - 100 of 122 matches
Mail list logo