Hi guys,
I was working on vol2 lab6 question 3.1, And I cannot get the Mobile
number ring on br1 phones or br2 phones as if it's coming from hq ph2,
however when I've called from Mobile PSTN to hq phones I can see that
the number is from HQ Phone2 (4002).
I know that is a problem with the
CUCM don't provide redundancy for EM.
For IPMA you can activate the service on sub or on pup also both if u
want redundoncy
On 06/15/2010 12:59 PM, Angel Perez wrote:
Hi:
There are certain services: em, ipma, ac, axl or even dhcp and tftp
that you can activate at pub or sub.
If it is not
post your config
On 06/13/2010 08:38 PM, ccie rs wrote:
I have been playing with this using IPX Vol 1 Lab 7a but cannot get it
to work. It appears that almost everyone has issues with MOH from
flash and while reading through the list and trying everything, my MOH
is still not working.
This
The only way is to have separate interfaces, however you can use FRTS
for both sites.
On 06/10/2010 03:35 PM, Matthew Berry wrote:
Quick question.
In the lab, if the HQ site is setup with two sub-interfaces that
connect to BR1 and BR2 (i.e. meaning, they're both running off the
same
*Gmail*: ciscovoiceg...@gmail.com
*Skype*: ciscovoiceguru
*Twitter*: ciscovoiceguru
*_Cert Stats:_*
Cisco Cert Journey Began: Jan 1, 2009
1st Lab Attempt: Aug 16, 2010
On 6/10/2010 9:50 AM, kerboute kerboute wrote:
The only way is to have separate interfaces, however you can use FRTS
Hi,
Everything for email notification need to be setup on CUE not CME.
when you configure your imap account on the client (outlook or lotus
notes) you have to specify the email address like
usern...@ip_address-cue and the password of the user
Below the steps:
* Enable IMAP service
#wpxref95805
command to display the system default certificate-key pair
I checked customer router and there is no crypto on there.
So is it ok if I use this command _session security mixed_.
Angel?
Thanks
Ash
*From:* kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma]
*Sent:* 07 June 2010 11:46
a voicemail is left, will it go to us...@company.com
mailto:us...@company.com or us...@10.10.202.2
mailto:us...@10.10.202.2
Also do I have to add this command at CUE
_session security mixed_
*From:* kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma]
*Sent:* 07 June 2010 12:43
*To:* Ashar Siddiqui
-wide notification?
Also, what if I configure it thru SMTP? Will that deliver to company
mailbox? Is that supported on AIM module? Any restrictions etc..
Thanks for all your help.
Ash
*From:* kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma]
*Sent:* 07 June 2010 12:59
*To:* Ashar Siddiqui
*Cc
YES MAN
On 06/07/2010 01:19 PM, Ashar Siddiqui wrote:
Thanks Kerboute.
Last question before I leave you in peace, is this supported on CUE
AIM module? (IMAP)
J
Thanks
Ash
*From:* kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma]
*Sent:* 07 June 2010 13:11
*To:* Ashar Siddiqui
*Cc
attendant console is end of life for CUCM 7
You need Cisco unified attendant console server
On 05/31/2010 11:28 PM, Pavan K wrote:
Does anybody have a link to / copy of the attendant console plugin ?
--Thanks in advance.
- Pavan
___
For more
Congratulations brother
On 05/25/2010 11:18 PM, Ehab Salem wrote:
Dear Group,
I Passed from the first shot Really thanks a lot for all your
help...I really learned a lot from this kind study list J
All what I want to say about my experience: the exam is easier than
what we have in
Congratulations brother
On 05/25/2010 11:18 PM, Ehab Salem wrote:
Dear Group,
I Passed from the first shot Really thanks a lot for all your
help...I really learned a lot from this kind study list J
All what I want to say about my experience: the exam is easier than
what we have in
Amy,
Thank you, It's working now by entering 80 then press BLF button, You're
right :)
On 05/23/2010 10:23 PM, Amy Ryan wrote:
When you are attempting to retrieve the call via the BLF button, which way
are you conducting this?
1. Directly pressing the BLF button.
2. Entering the prefix
Hi guys,
I have an issue with EM on CME BR2, I've created the logout profile and
assign it to the br2 phone2 but when i press the button service I've got
No services Configured, is there any restriction due to the firmware
of IP phones ??
Any Idea?
note: ip http server already configured
Once you have the CUCM up go to entreprise parameters and change the
default auto registration protocol to SCCP, some Rack have the SIP on
CUCM, this is why ip phone upgrade the firmware.
On 05/17/2010 06:15 AM, amr gaber wrote:
Hi ALL,
I try to conect some hardware IP Phones through EZ
Hi guys,
Yesterday I worked on the the lab 13 Vol1 for presence, And I cannot got
CUPC work properly, the CUPC connect to presence but with Limited state
and I cannot get the directory search and chat ...
Any Ideas?
Regards
Naoufal
___
For more
Hi,
I'm working on lab 7 Vol 1 question 7.3 and ran into an issue with BR1.
BR1 Conf bridge is registred to CUCM (No problem) and add it to MRGL to
BR1 DP.
scenario:
HQ-Phone2 BR1Phone2 CONF-TO PSTN
If I try to join the conference call from HQ Phone dropped and get on
BR1 phone screen
Hi,
I'm working on lab 5C Vol1 and I'm having a troube with the HQ T1, when
I make a call to 911 I've got the message below:
May 12 02:46:26.355: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
type/plan 0x0 0x0 may be overriden; sw-type 13
May 12 02:46:26.355: ISDN Se0/0/0:23 Q931: Applying
of pri timeslots if you are unsure.
Jeff
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of kerboute
kerboute
Sent: Tuesday, May 11, 2010 3:51 PM
To: CCIE Voice Maillist
Subject: [OSL | CCIE_Voice] Problem
Congratulations
Can you share with us how did you proceed to the exam? what was the most
difficult thing?...
Regards
On 05/12/2010 01:24 AM, Omotayo wrote:
Hello All,
I had my exams in SAN JOSE yesterday and got the result this morning
It was my second attempt
Thanks all for answering all
Hi,
Thank you Mattheuw, I found the problem.
I cannot made call from HQ phone to the PSTN (ring and disconnect) then
I found that is a Bug with g722 advertise so I disabled it on the phone
and it works now.
Regards
Naoufal
On 05/12/2010 01:36 AM, Matthew Berry wrote:
Can you post the output
Hi IP Expert,
I'm working on lab 5A Vol 1, on pod14 and i cannot get T1 layer2 for BR1
to be multiframe-established.
My config is correct.
BR1-RTR#sh isdn status
Global ISDN Switchtype = primary-ni
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may
not apply
ISDN
Thank you
the problem was related to the cucm replication I've changed the primary
call agent to the publisher and it's working
On 05/10/2010 01:55 AM, Roger Henderson wrote:
Try rebooting the router if nothing else works.
On Mon, May 10, 2010 at 9:09 AM, kerboute kerboute
naoufal.kerbo
Can any one answer my question?
thank you
On 05/06/2010 11:37 PM, kerboute kerboute wrote:
Hi guys,
Can I use a cisco 837 router to setup VPN with Proctors Voice vRack?
Regards
Naoufal
___
For more information regarding industry leading CCIE
Hi guys,
Can I use a cisco 837 router to setup VPN with Proctors Voice vRack?
Regards
Naoufal
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
it's working
On 05/05/2010 11:30 PM, vccie2010 wrote:
http://proctorlabs.com/
is not openingis it down pls ??
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi all,
Any one setup the question 5.3 of the lab 5A vol1 using IP comm 7.0.3
and IP blue 2.10 for globalization and localization.
Thank you
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi guys,
Actually I'm working on LAB5A Vol1, and I have some problems related to
globalization and localization.
Just for Information, my voice lab using GNS3 routers and vmware for
CUCM ..., Phones (IP Blue, xlite and CIPC 7)
My problem related to question 5.3, I setup everything for
Hi guys,
I'm working on lab 4a question 4.5 (SIP URI dialing), all the
configuration is done but when i tried to call form IP Communication on
the entreprise directory the user : 3...@ipxcme.com I've got a reorder
message on the phone??
The user is created, sip route pattern pointed to the
Hi Experts,
I have installed UCCX7 and i need supervisor to listen to agents calls.
I did every thing but when i started the supervisor to listen agent call
i've got a error like check network card compatibility , ensure that
span configured correctly..
Any Ideas?
Regards
Naoufal
Hi Experts,
I have installed UCCX7 and i need supervisor to listen to agents calls.
I did every thing but when i started the supervisor to listen agent call
i've got a error like check network card compatibility , ensure that
span configured correctly..
Any Ideas?
Regards
Naoufal
Hi,
Try PhonexONE
Naoufal
Zahid Hassan wrote:
Dear All,
Will appreciate any recommendation for a CDR reporting
software for a small environment running CUCM 7.1.
Many thanks in advance.
Regards,
Zahid
33 matches
Mail list logo