Re: [OSL | CCIE_Voice] HWIC-4ESW
ESW are around $200, while a POE switch is $50.. Figure that.. :) On Jul 26, 2013, at 10:20 AM, wilson.sam...@bt.com wrote: One could easily buy the HWIC-4ESW on the ebay, and its almost at the same price as a 3560-PoE, however with ESW you will have to use the power bricks for the phones or buy a POE - Daughter Card for the phones to get power, which will put them in a slightly expensive mode than a PoE Switch (sounds bit crazy, isn't it?) Regards -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of CCIE Voice Aspirant Sent: Thursday, July 25, 2013 12:45 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] HWIC-4ESW Hello list I am looking for 2 HWIC-4ESW cards for my lab, does anyone have spares I can buy? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] HWIC-4ESW
Hello list I am looking for 2 HWIC-4ESW cards for my lab, does anyone have spares I can buy? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HWIC-4ESW
Sir, Just use 3550 24 Poe switch it cost $70 on ebay. That HWIC will cost u at least $200 or more. I know its better for practicing labs but its not cost effective. You can find it on ebay.com Thanks, Hesham On 25 July 2013 09:45, CCIE Voice Aspirant ccievoice2013.2...@gmail.comwrote: Hello list I am looking for 2 HWIC-4ESW cards for my lab, does anyone have spares I can buy? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HWIC-4ESW
Hi Hesham I was thinking of going that route as well. Do you know how different the configuration is when using a 3560/3750 instead of ESW. From what I read, the VLAN configuration will be slightly different, and I'll have to create a trunk as well between the branch router and branch switch. Thanks On Jul 25, 2013, at 1:20 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Sir, Just use 3550 24 Poe switch it cost $70 on ebay. That HWIC will cost u at least $200 or more. I know its better for practicing labs but its not cost effective. You can find it on ebay.com Thanks, Hesham On 25 July 2013 09:45, CCIE Voice Aspirant ccievoice2013.2...@gmail.com wrote: Hello list I am looking for 2 HWIC-4ESW cards for my lab, does anyone have spares I can buy? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HWIC-4ESW
Yes sure just make DOT1Q on port 24 switchport mode trunk switchport trunk encapsulation dot1q in the Branch router like gig0/1 or whatever make a router on stick (Sub interfaces) Int gig0/0.302 encapsulation dot1q 302 ip address 142.102.65.254 255.255.255.0 no shut int gig0/0.402 encpasulation dot1q 402 ip address 142.202.65.254 255.255.255.0 no shut ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HWIC-4ESW
Just get that model is good enough and cheap 3550-PWR-24 On 25 July 2013 11:28, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Yes sure just make DOT1Q on port 24 switchport mode trunk switchport trunk encapsulation dot1q in the Branch router like gig0/1 or whatever make a router on stick (Sub interfaces) Int gig0/0.302 encapsulation dot1q 302 ip address 142.102.65.254 255.255.255.0 no shut int gig0/0.402 encpasulation dot1q 402 ip address 142.202.65.254 255.255.255.0 no shut ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HWIC-4ESW
Sounds good, thanks Hesham! On Jul 25, 2013, at 1:29 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Just get that model is good enough and cheap 3550-PWR-24 On 25 July 2013 11:28, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Yes sure just make DOT1Q on port 24 switchport mode trunk switchport trunk encapsulation dot1q in the Branch router like gig0/1 or whatever make a router on stick (Sub interfaces) Int gig0/0.302 encapsulation dot1q 302 ip address 142.102.65.254 255.255.255.0 no shut int gig0/0.402 encpasulation dot1q 402 ip address 142.202.65.254 255.255.255.0 no shut ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HWIC-4ESW POE issue
Thanks All for your inputs. BR Deepak From: Sivakumar Mahalingam sima...@gmail.com To: Damon Chaput dcha...@1800contacts.com Cc: ccie_voice@onlinestudylist.com Sent: Fri, 25 June, 2010 1:17:45 AM Subject: Re: [OSL | CCIE_Voice] HWIC-4ESW POE issue Just go with the 7900 series cisco power suppies for the phones.Its very cheap and below is the link. http://www.cablesandkits.com/cisco-7900-series-phone-power-supply-cppwrcube-p-49.html hth simah. On Thu, Jun 24, 2010 at 4:10 PM, Damon Chaput dcha...@1800contacts.com wrote: You will need to correct PS as well. For example, if you have a 2811 you would need the PWR-2811-IP= + the POE daughter card. Thanks, Damon Chaput Telecommunications Engineer 1-800 Contacts (801) 316-7855 Desk (801) 891-8525 Mobile dcha...@1800contacts.com From:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Deepak sidana Sent: Thursday, June 24, 2010 1:46 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] HWIC-4ESW POE issue Hi All, I am in process of setting home lab, i am facing a problem with HWIC-4ESW. I have crated L2 L3 vlans(vlan 200,400) on BR-II Router. configure the ports with following commands. switchport trunk native vlan 200 switchport mode trunk switchport voice vlan 400 i have also tried pppoe enable command under interface, but its also not helpul. When i plug the IP Phone, it does't recive the power,so vlan does't come up.If i plug my laptop driectly to port it work fine. Please suggest how to make the HWIC-4ESW Power enabled. BR Deepak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] HWIC-4ESW POE issue
Hi All, I am in process of setting home lab, i am facing a problem with HWIC-4ESW. I have crated L2 L3 vlans(vlan 200,400) on BR-II Router. configure the ports with following commands. switchport trunk native vlan 200 switchport mode trunk switchport voice vlan 400 i have also tried pppoe enable command under interface, but its also not helpul. When i plug the IP Phone, it does't recive the power,so vlan does't come up.If i plug my laptop driectly to port it work fine. Please suggest how to make the HWIC-4ESW Power enabled. BR Deepak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] HWIC-4ESW POE issue
If you just have a HWIC-4ESW, you won't have PoE. In order to have PoE you needs to have a HWIC-4ESW-POE module. You can try all you want, but you will never be able to enable PoE with a HWIC-4ESW module. Ref: http://www.cisco.com/en/US/prod/collateral/routers/ps5853/product_data_sheet0900aecd8016bf0b_ps5855_Products_Data_Sheet.html On Thu, Jun 24, 2010 at 3:45 PM, Deepak sidana sidana_dee...@yahoo.comwrote: Hi All, I am in process of setting home lab, i am facing a problem with HWIC-4ESW. I have crated L2 L3 vlans(vlan 200,400) on BR-II Router. configure the ports with following commands. switchport trunk native vlan 200 switchport mode trunk switchport voice vlan 400 i have also tried pppoe enable command under interface, but its also not helpul. When i plug the IP Phone, it does't recive the power,so vlan does't come up.If i plug my laptop driectly to port it work fine. Please suggest how to make the HWIC-4ESW Power enabled. BR Deepak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] HWIC-4ESW POE issue
BTW adding the PoE daughter card will do no good unless you have the PoE version of the power supply in the router as well Graham On 24 Jun 2010, at 20:54, Adam Thompson phoe...@fatturtle.com wrote: If you just have a HWIC-4ESW, you won't have PoE. In order to have PoE you needs to have a HWIC-4ESW-POE module. You can try all you want, but you will never be able to enable PoE with a HWIC-4ESW module. Ref: http://www.cisco.com/en/US/prod/collateral/routers/ps5853/product_data_sheet0900aecd8016bf0b_ps5855_Products_Data_Sheet.html On Thu, Jun 24, 2010 at 3:45 PM, Deepak sidana sidana_dee...@yahoo.com wrote: Hi All, I am in process of setting home lab, i am facing a problem with HWIC-4ESW. I have crated L2 L3 vlans(vlan 200,400) on BR-II Router. configure the ports with following commands. switchport trunk native vlan 200 switchport mode trunk switchport voice vlan 400 i have also tried pppoe enable command under interface, but its also not helpul. When i plug the IP Phone, it does't recive the power,so vlan does't come up.If i plug my laptop driectly to port it work fine. Please suggest how to make the HWIC-4ESW Power enabled. BR Deepak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] HWIC-4ESW POE issue
You will need to correct PS as well. For example, if you have a 2811 you would need the PWR-2811-IP= + the POE daughter card. Thanks, Damon Chaput Telecommunications Engineer 1-800 Contacts (801) 316-7855 Desk (801) 891-8525 Mobile dcha...@1800contacts.com From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Deepak sidana Sent: Thursday, June 24, 2010 1:46 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] HWIC-4ESW POE issue Hi All, I am in process of setting home lab, i am facing a problem with HWIC-4ESW. I have crated L2 L3 vlans(vlan 200,400) on BR-II Router. configure the ports with following commands. switchport trunk native vlan 200 switchport mode trunk switchport voice vlan 400 i have also tried pppoe enable command under interface, but its also not helpul. When i plug the IP Phone, it does't recive the power,so vlan does't come up.If i plug my laptop driectly to port it work fine. Please suggest how to make the HWIC-4ESW Power enabled. BR Deepak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] HWIC-4ESW QoS?
Any doco on this? As far as I can tell, there is no QoS capability on this thing... Jonathan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com