I believe each session is a call leg, but it doesnt really matter because
the software sessions don't use any dsp resources so you don't need to be
frugal. Many people use max sessions software 500 because that is the
highest supported number and it doesn't cost any dsp.
When verifying rsvp with show ip rsvp reservation command you will see
two rows of info (one for each call leg). With g729 this command will show
you 40k if you run the command while ringing or 24k if you run the command
once the call is connected.
Also, you should take out codec pass-through as that allows endpoints to
negotiate codec and you want the mtp locked at g729r8 as listed.
Hope this helps...
-Justin
On Aug 15, 2013 11:09 PM, Josh Petro josh.pe...@gmail.com wrote:
Hi All,
Can anyone explain the Maximum Sessions command to me, please? Google
and Cisco have not helped me tonight.:)
If I have the below config in two gateways registered to the CUCM, then I
should be allowed two calls max, right? Is a Session considered a call,
or just a call leg?
dspfarm profile 5 mtp
codec g729r8
codec pass-through
rsvp
maximum sessions software 2
associate application SCCP
!
interface Serial0/0/1:0.2 point-to-point
ip address 10.10.112.1 255.255.255.0
ip rsvp bandwidth 64
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
