[OSL | CCIE_Voice] calling through GK and CUBE - calling phone keeps ringing
Wait for 245 MTC is unchecked on the GK trunk setting on CUCM. When setting CUBE to use g729 taking the transcoder out of the picture the calls worked fine. With xcoding to g711 on cube the originating phone (hq ph1) continues to ring after picking up BR2 phone.Any help iseatly appreciated. Thanks! Joel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] calling through GK and CUBE - calling phone keeps ringing
Hello Joe , i think the transcorder work as MTP when you allocate it and that's why you get it working , (of course, no logs=assumptions) but have you tried to invoke any supplementary service in the case when you had XCODER allocated ? see if it will work -can you try to enable MTP ( for the G711u calls (no worry if you use SW MTP because your call based on G711u ) and test the behavior ? its always worked for me , its only start being naughty when i configure VIAZONE and i got it fixed one time by allocating IOS HQ MTP check those points out and let us now how it will go Thanks Ash On Wed, Jul 27, 2011 at 8:52 PM, Joel Tyson joel.ty...@gmail.com wrote: Wait for 245 MTC is unchecked on the GK trunk setting on CUCM. When setting CUBE to use g729 taking the transcoder out of the picture the calls worked fine. With xcoding to g711 on cube the originating phone (hq ph1) continues to ring after picking up BR2 phone. Any help iseatly appreciated. Thanks! Joel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] calling through GK and CUBE - calling phone keeps ringing
That is usually the result of fast start not being enabled. I would also try mtp required if that alone does not fix it. Sent from my iPhone On Jul 27, 2011, at 10:52 AM, Joel Tyson joel.ty...@gmail.com wrote: Wait for 245 MTC is unchecked on the GK trunk setting on CUCM. When setting CUBE to use g729 taking the transcoder out of the picture the calls worked fine. With xcoding to g711 on cube the originating phone (hq ph1) continues to ring after picking up BR2 phone.Any help iseatly appreciated. Thanks! Joel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] calling through GK and CUBE - calling phone keeps ringing
Hello William , Joe the default on the is SS not FS and if you enable FS for the outgoing calls on the CCM you will always need MTP otherwise the option will be grad out , MTP will fix this issue , can you please try to not enable FS and allocate MTP and test and then enable FS on both the CCM and the GW and try as well , to enable FS on the GW you need to add : voice service voip h323 call start fast this will isolate the issue . Note : if the CCM will fail to negotiate FS , it wil fall back to use SS automatically , you can see this clearly in the CCM SDI/SDL traces Best regards Ash On Wed, Jul 27, 2011 at 9:07 PM, William Affeldt william.affe...@yahoo.com wrote: That is usually the result of fast start not being enabled. I would also try mtp required if that alone does not fix it. Sent from my iPhone On Jul 27, 2011, at 10:52 AM, Joel Tyson joel.ty...@gmail.com wrote: Wait for 245 MTC is unchecked on the GK trunk setting on CUCM. When setting CUBE to use g729 taking the transcoder out of the picture the calls worked fine. With xcoding to g711 on cube the originating phone (hq ph1) continues to ring after picking up BR2 phone. Any help iseatly appreciated. Thanks! Joel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] calling through GK and CUBE - calling phone keeps ringing
correction : the default on the GW is FS , and the CCM can fall back to SS automatically :) sorry guys, thanks for refresh my memory Ash On Wed, Jul 27, 2011 at 9:12 PM, Ashraf Ayyash ash.ayy...@gmail.com wrote: Hello William , Joe the default on the is SS not FS and if you enable FS for the outgoing calls on the CCM you will always need MTP otherwise the option will be grad out , MTP will fix this issue , can you please try to not enable FS and allocate MTP and test and then enable FS on both the CCM and the GW and try as well , to enable FS on the GW you need to add : voice service voip h323 call start fast this will isolate the issue . Note : if the CCM will fail to negotiate FS , it wil fall back to use SS automatically , you can see this clearly in the CCM SDI/SDL traces Best regards Ash On Wed, Jul 27, 2011 at 9:07 PM, William Affeldt william.affe...@yahoo.com wrote: That is usually the result of fast start not being enabled. I would also try mtp required if that alone does not fix it. Sent from my iPhone On Jul 27, 2011, at 10:52 AM, Joel Tyson joel.ty...@gmail.com wrote: Wait for 245 MTC is unchecked on the GK trunk setting on CUCM. When setting CUBE to use g729 taking the transcoder out of the picture the calls worked fine. With xcoding to g711 on cube the originating phone (hq ph1) continues to ring after picking up BR2 phone. Any help iseatly appreciated. Thanks! Joel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com