Re: [OSL | CCIE_Voice] SHOW CDP Neighbor Error On 2811 Router HWIC-4ESW POE

2011-07-06 Thread Larry Powers
If you have another router with the exact same config that passes - why not swap the 4ESW cards and see if the problem follows the 4ESW or stays with the chassis? Larry On Wed, Jul 6, 2011 at 10:29 AM, Webb Posey webbpo...@gmail.com wrote: I verified the Cable and the other ports and all is

Re: [OSL | CCIE_Voice] Problem with 7961

2011-07-10 Thread Larry Powers
Just before you toss it in the trash and give up - do this. Take it apart and check for any loose or disconnected ribbon connectors or any other connections that may have become dislodged when the phone was dropped. I would expect any damage that disables the phone should be visable inside. If

Re: [OSL | CCIE_Voice] What kind of server hardware are you all using for the UC Apps

2011-07-15 Thread Larry Powers
Hi Tony, I am currently running a single server with 2 quad core CPUs (and therefore 64bit - a must for ESX) and 8gb of ram. I'm running ESX and I have 1 TB of drive space. I can run CUCM-PUB w/2-CPUs and 2GB of ram assigned. My CUCM-SUB is set up the same way. CUPS, and CUX set up the same way.

Re: [OSL | CCIE_Voice] Cisco 878 router

2011-07-19 Thread Larry Powers
I don't think your comments touched on this so I'll throw it out there. Is your service provider using ADSL or SDSL ? https://supportforums.cisco.com/message/3164584 Hope this helps and good luck with that. Larry On Mon, Jul 18, 2011 at 11:32 AM, narayan sarma narayan.na...@hotmail.comwrote:

Re: [OSL | CCIE_Voice] 2651xm and MGCP gateway - Problem solved,

2011-07-20 Thread Larry Powers
I have been trying to follow the many posts regarding this issue. I look forward to Steven sharing what resolved the issue because I have some of the same inventory in my lab and don't want to repeat the problem. I've been troubleshooting for a long time and have had many occasions where all it

Re: [OSL | CCIE_Voice] 4-port HWIC-ESW - Phone can't power-on

2011-08-19 Thread Larry Powers
This sounds all to familiar to me... I have 3 2811, 2 4esw-poe, 1 power supply AC with -48V You could also do a SHOW ENVIRONMENT and that will tell you if you have the needed power supply to support the POE. Good Luck. Larry On Fri, Aug 19, 2011 at 5:25 PM, Bill Lake whl...@gmail.com wrote:

Re: [OSL | CCIE_Voice] 911 calls by mistake

2014-05-29 Thread Larry Powers
I use both 911 and 9.911. People are conditioned to dial 911 and in an emergency some people panic. K.I.S.S. CDR was key on my last job to fix this. One branch was complaining more than others and almost all of the calls were erroneously placed by a single user. Another thing I did was direct