Hi Anthony,
I'm not sure how to deep to go on the explanation but basically you have 2
capture groups in the 'match' string which are denoted by the parentheses,
which have to be escaped by the backslash. These translations are based on
the Unix Stream EDitor (SED) program and certain
I agree with Marty's response. I happen to be a visual learner, so if you
are too then below is a your example marked up with colors to highlight the
different parts of the rule.
(Also, read this:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
)
voice
Wow. Great explanation! That was above and beyond.
On Fri, Oct 4, 2013 at 3:23 PM, Justin Carney justin.s.car...@gmail.comwrote:
I agree with Marty's response. I happen to be a visual learner, so if you
are too then below is a your example marked up with colors to highlight the
different
Regis,
If I understand you correctly you're placing an international call and want to
do variable digit dialing, most likely for either SRST or for an H323 gateway.
In this case where your using 9 for the secondary dial tone and 011 for
international calling you wouldn't use a voice
Hi Hesham,
You make this form:
voice translation-rule 1
rule 1 /^91\(..$\)/ /\1/
rule 2 /^9\(..$\)/ /\1/
rule 3 /^9\(...$\)/ /\1/
Test it. I put the $ after last digit, because I understand that you want
match with the total digits diled.
Regis Reis
Hi Hesham,
You're trying to do this translation on voip dial-peers?
You could try this
rule 1 /^9\(1...\)/ /\1/ number of dots depends on how many digits to
keep.
Try and let's know.
Regards.
Khaled
Date: Fri, 28 Jun 2013 09:29:07 -0700
From: heshamcentr...@gmail.com
To:
Regist what about if i need it for 9011T
I would like to strip 9 from 011T how can i do it?
On 28 June 2013 10:02, Regis Reis regis_r...@yahoo.com.br wrote:
Hi Hesham,
You make this form:
voice translation-rule 1
rule 1 /^91\(..$\)/ /\1/
rule 2 /^9\(..$\)/ /\1/
rule 3
Um, not sure why you are making this so complicated
SiteC-RTR(config)#voice translation-rule 8
SiteC-RTR(cfg-translation-rule)#rule 1 /^9/ //
SiteC-RTR(cfg-translation-rule)#do test voice translation-rule 8 95551234
Matched with rule 1
Original number: 95551234 Translated number: 5551234
,
ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Translation-rule help
Hi Hesham,
You make this form:
voice translation-rule 1
rule 1 /^91\(..$\)/ /\1/
rule 2 /^9
You are correct, this only catches when there is a null number, so :
voice translation-rule 100
rule 1 /^$/ /42000/
If applied to an ANI would only apply to calls that had no ANI set and rewrite
it to 42000.
Matt
On May 21, 2010, at 3:58 PM, Ashar Siddiqui wrote:
Thanks David I have
:58
Till: David Holman
Kopia: ccie_voice@onlinestudylist.com
Ämne: Re: [OSL | CCIE_Voice] translation rule
Thanks David I have already gone through that document many times :)
Thanks Wael for your explanation. I was actually thinking that what would a
null number be in my example. I have
Consultant
Cygate AB
Från: Ashar
Siddiqui [siddas...@gmail.com]
Skickat: den 21 maj 2010 22:58
Till: David Holman
Kopia: ccie_voice@onlinestudylist.com
Ämne: Re: [OSL | CCIE_Voice] translation rule
Thanks David I have already gone through that document many
times :)
Thanks
Dear Ashar,
The ^$ is catching null, which could be used to catch calls from unkown.
example usage, drop any calls from PSTN that has ANI of unkown type.
On H323 you could use following rule to do this
voice translation-rule 1
rule 1 reject /^$/
voice translation-profile Drop-Unknown
I keep this link handy for voice translation questions:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
On Fri, May 21, 2010 at 4:15 PM, Wael Agina waelag...@gmail.com wrote:
Dear Ashar,
The ^$ is catching null, which could be used to catch calls
Thanks David I have already gone through that document many times :)
Thanks Wael for your explanation. I was actually thinking that what
would a null number be in my example. I have this customer router which
has this specific rule for inbound calls. Will it work when PSTN will
send "null
Siddiqui
Sent: Saturday, April 03, 2010 10:52 PM
To: Hough, Earl
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Translation rule?
Cheers mate! it worked.
On 04/04/2010 03:47, Hough, Earl wrote:
It's an old RS lab trick.
Hold down Ctrl+v first, then release and type
: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Translation rule?
That is a good trick. :)
Couldn't you also use a backslash in front of the ? to escape the
wildcard? Not in front of a console right now so can't verify...
cheers, sd
From: ccie_voice-boun
It's an old RS lab trick. Hold down Ctrl+v first, then release and
type the question mark. It should come in as a literal character and
not a navigation key of the CLI.
Earl Hough CCIE #16508 (RS/Security)
From: ccie_voice-boun...@onlinestudylist.com
Cheers mate!
it worked.
Ash
On 04/04/2010 03:47, Hough, Earl wrote:
It's an old RS lab trick. Hold down Ctrl+v first, then release and
type the question mark. It should come in as a literal character and
not a navigation key of the CLI.
*Earl Hough* CCIE #16508 (RS/Security)
*From:*
Try using numexp
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WorkerBee
Sent: Wednesday, June 18, 2008 1:58 PM
To: OSL CCIE Voice Lab Exam
Subject: [OSL | CCIE_Voice] Translation Rule for ephone-dn
I would like to perform digit manipulation at
Numexp will work but I want to use the newer voice translation-profile
method applied to ephone-dn instead.
Under ephone-dn, it does support translation-profile but it doesn't
seems to work.
On Thu, Jun 19, 2008 at 5:02 AM, Derrick Shumake [EMAIL PROTECTED] wrote:
Try using numexp
]
Subject: Re: [OSL | CCIE_Voice] Translation Rule for ephone-dn
Numexp will work but I want to use the newer voice translation-profile
method applied to ephone-dn instead.
Under ephone-dn, it does support translation-profile but it doesn't
seems to work.
On Thu, Jun 19, 2008 at 5:02 AM, Derrick Shumake
on ephone
ephone-dn 1
number 8001
translation-profile incoming HELP
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WorkerBee
Sent: Wednesday, June 18, 2008 4:06 PM
To: OSL CCIE Voice Lab Exam; [EMAIL PROTECTED]
Subject: Re: [OSL | CCIE_Voice
23 matches
Mail list logo
