OK. I've done the first of the manuals I have. Thanks for all the helpful
hints.
I took apart the Rainbow User's Manual's metal spiral spine. I scanned it
with scansnap and ran it through the indexing function. I think I tweaked
the settings in a reasonable way.
The results look good to my eye,
same as sticky shed syndrome?
On Fri, Jul 19, 2019 at 10:22 PM Chuck Guzis via cctalk <
cctalk@classiccmp.org> wrote:
> This is in reference to my earlier post about Scotch 777 half-inch
> open-reel tapes. I'd reported that I encountered a tape that displayed
> binder bleed, such that the tape
This is in reference to my earlier post about Scotch 777 half-inch
open-reel tapes. I'd reported that I encountered a tape that displayed
binder bleed, such that the tape would stick to the heads and guides.
This was a tape that had been both baked and cleaned.
Coating the tape with a film of
I pulled my Pro380 out of storage after getting a replacement
VR201 monitor. I connected it all together and on powerup I
get the following display:
http://www.dittman.net/pro380/screen.jpg
The tech manual says this is an error from slot 1 (the hard
drive controller) and the error is
On 7/19/19 4:04 PM, Zane Healy via cctalk wrote:
>
>> On Jul 18, 2019, at 8:58 PM, Eric Dittman via cctalk
>> wrote:
>>
>> On 7/18/2019 12:26 AM, Zane Healy via cctalk wrote:
>>> On a related note, was there ever a copy of dBase III or dBase IV for
>>> VAX/VMS? I know there was a version of
On Jul 18, 2019, at 14:50, Warner Losh via cctalk wrote:
> So, I have a bunch of old DEC Rainbow docs that aren't online. I also have
> a snapscan scanner that I use for bills and such.
I do this kind of thing, with a ScanSnap S1500M (M means Mac),
but mostly don't mind that the process is
> On Jul 18, 2019, at 8:58 PM, Eric Dittman via cctalk
> wrote:
>
> On 7/18/2019 12:26 AM, Zane Healy via cctalk wrote:
>> On a related note, was there ever a copy of dBase III or dBase IV for
>> VAX/VMS? I know there was a version of Lotus 1-2-3.
>
> I don't know about the earlier
Carl Claunch pointed me at this, he has one and I am sure he can comment
further. I have ordered one.
What about the setups where it's a cube with with digital cameras mounted
facing opposite plexiglass panels? You sit it down in the book and the
cameras shoot both pages at once.
On 2019-07-19 6:36 a.m., Chuck Guzis via cctalk wrote:
> On 7/18/19 10:01 PM, Guy Dunphy via cctalk wrote:
>
>> I have a lot more to say about the wisdom of destroying original publications
>> to scan them, especially when you are not already an expert at scanning and
>> the many tradeoffs.
>>
On 19/07/2019 06:01, Guy Dunphy via cctalk wrote:
I have a lot more to say about the wisdom of destroying original publications
to scan them, especially when you are not already an expert at scanning and
the many tradeoffs.
But have to go afk just now.
I scanned a decent amount, several
On Fri, Jul 19, 2019, 01:01 Guy Dunphy via cctalk
wrote:
>
> I have a lot more to say about the wisdom of destroying original
> publications
> to scan them, especially when you are not already an expert at scanning and
> the many tradeoffs.
> But have to go afk just now.
>
There are literally
> Have a look at
> https://www.indiegogo.com/projects/aura-speeds-simplifies-all-your-
> scanning-needs#/
>
> Carl Claunch pointed me at this, he has one and I am sure he can
> comment
> further. I have ordered one.
You can actually get them off of Amazon and they run specials on them quite
12 matches
Mail list logo
