unsub
a
sudden I'm getting email (actually 11 of them) here again?
What is going on??
Allison
On 11/24/19 5:07 PM, Murray McCullough via cctalk wrote:
> The first Internet message was sent 60 yrs. ago on Nov. 21 between SRI and
> UCLA. It was one-to-many, or more accurate one-to-one, but the world today
> is many-to-many though cctalk runs through a moderator. The Internet
> democratizes
On 11/22/19 2:36 PM, Al Kossow via cctalk wrote:
>
>
> On 11/22/19 11:16 AM, Chris Zach via cctalk wrote:
>> That
>> could be a problem if I want to re-load Cobol 81 onto this RSTS/E system.
>
> weren't RL01s usable in an RL02?
>
>
No for RL. You, maybe thinking RX01/02 interchangeability.
I can't it's in the way. Space and all are the reasons.
You can get the pin out for both ends from the manuals and the prints.
If you get it wrong things just don't work but no breakage.
On 11/22/19 3:42 PM, Henk Gooijen wrote:
>
>
>
>
> *Van: *allison via cct
,
with at least 1 floppy and working.
Allison
I Use a spare MicroVAX-2000, the system roms ahve good diags and
formatter for floppies and HD.
Allison
On 11/20/19 1:14 AM, Jacob Ritorto via cctalk wrote:
> Nice going!
>
> Related story:
> I had probs formatting a maxtor 11xx (not an actual xt-2190 but really close)
>
On 11/17/19 2:17 PM, Fritz Mueller via cctalk wrote:
> Hi Paul,
>
>> I think you mean RX11.
>
> Ah, yes — I typo’d that, thanks!
>
>> Isn't the BC05L-15 folded up in the case? Or did they put a short one to the
>> back of the box? I can't remember now.
>
> I’ll have a look to remind myself
only fire the thing up about once every 5 years or so...
>
> --Chuck
>
Mine are in the once a year for the lest frequently used and a few at
least once a week.
I find them bullet proof.
Allison
d
uVAX2000 and swap file disks on uVAXII (61K blocks is more than
enough swap space) for VMS5.44.
I've not had stiction problems... likely because I have spares!
Its a Murphy's law thing.
Allison
ocket on the other two machines, but with the upper two pins
>> (intentionally) missing.
>> The PSU board inside appears to be a switcher, but I'd be inclined to
>> agree with Allison that it's intended to run from low-voltage AC (I've
>> put the machine back together now, but just re
t; convinced, either. The two-pin socket is actually the same as the
> four-pin socket on the other two machines, but with the upper two pins
> (intentionally) missing.
>
> The PSU board inside appears to be a switcher, but I'd be inclined to
> agree with Allison that it's i
and age. I'd bet more than half here never used a
modem or have not in more than 15-20 years.
Allison
ate, parity and word length to match the modem (is it
has at or similar protocal) and also to match the other end (usualy the
same).
My experience is fairly recent as WSTD.Cm still support dial-in terminal
or SLIP.
there are also synchronous modems, different critter.
Allison
> Jim, I'd try reachi
ct the two pin console to 100 or 230V without the
transformer. Or you will have a fire hazard!
Allison
structure, and bootable on both PDP-11 and uVAX-II.
Really? I'd like to know how that was done as they are not the same.
You mean readable not bootable maybe?
Allison
> let me know where to send it.
>
> Jon
>
>
Do better research.
The power is external transformer and internal low voltage switch mode power
supply.
Having carts is good. The bonus is an expansion box with floppy and cards.
FYI back when ratshack sold both.
Allison
IPhoned it in!
> On Nov 4, 2019, at 12:59 AM, Kevin Parker
On 10/30/19 10:18 AM, Liam Proven via cctalk wrote:
> On Wed, 30 Oct 2019 at 03:34, allison via cctalk
> wrote:
>
>>
>> The whole story of what was going on was far more complex and interesting.
>
> Conceded.
>
>> Funny thing was DECnet was in 1983 the
he DARPA/Arpanet.
The network wars were warming up about then (1982ish) and it
would take till the late 80s early 90s for IP to win that war.
The big explosion was WWW.
Other names or routable networks, Banyan vines, and IPX come
to mind besides DECNET Phase III and IV.
Allison
I thought that was the first wide area network
that also used radios for links.
Generally "first" works if your specific enough. But in the old
Arpanet days if you said that on a list and were incomplete or wrong
you got your head handed to you upside down. Sometimes gently,
alone.
I was lucky being both Ex-Digit (former dec) and in the immediate area
so finding stuff years ago was easy and free. Long since dried up.
best advice is get DOCs, as much and varied of the QBUS PDP-11 family
and the various packaged systems as you can find or on line. Oh the
nasty part, you will have to actually read them to find a lot of the
details.
Allison
On 10/29/19 2:13 PM, Pete Turnbull via cctalk wrote:
> On 29/10/2019 16:28, Chris Zach via cctalk wrote:
>> The real problem is I'm trying to put an RQDX3 in there instead of the
>> ESDI controller so I can boot off RX50's. And I have no idea which way
>> all the various ribbon cables are supposed
not meet the
terms of service and refuses to go there.
Since schools and Uni's all seem to be M$ based maybe the terms
of service are in effect there.
And tubes... I'm like one of the few here that knows how to design
with them because I did.
Allison
On 10/7/19 10:54 AM, Ethan O'Toole via cctalk
rds and attention than the poorly
written mental spew that pretends to be intellectual. If I were
grading their work it would be a D- and a fail is less significant.
The scam is eating your time which is worth something with nothing in
reward. Lets call it 5 minutes you will never get back.
Allison
gt;
> From what I've heard and read, where a 25 pair cable is concerned, it's
> slate, not gray.
>
>
>
Grey or slate for outer jacket and the listed colors for wire pairs
or groups of pairs in the cable.
Allison
r all wasn't it Vonada that indicated computer are at best
partially tested?
Allison
a question of the number of angels that can dance on the
point of a pin. But could GCC compile code that has system access to
do nasties is a more complex question. Then again how does it get
system prives to start with?
First VAX represents more than a dozen different implementations from
the 780 though the many CMOS versions so what might be an issue for one
is likely not for another. The other half is the OS in use may be
sufficiently able to keep rogue processes confined. Of course there
are the LAVC and bus connected multi-cpu clustered systems.
In the end its mostly meaningless as the only reliable way to take a VAX
down is trip on the power cord, assuming you can get to it.
Allison
On 8/22/19 12:46 PM, William Donzelli via cctalk wrote:
> I have a pair of RL02 drives available, and can bring them to VCFmw in
> about three weeks. Pretty cheap. Untested.
>
> Contact me off list.
>
> --
> Will
>
Where are they now?
Allison
stable, maybe. I had to
retire that machine after about 2 years it was so flakey due to that.
By then the suspect boards were retired and never used again.
Looking back and having it to look at part of the issue was crappy gold
plating (looked good) and also some of the sockets did not have a hard
wipe or high spring tension both of which were likely causative.
I've not see that anywhere else. Dec connector blocks are hard wipe
and very good at what they do, make a connection. Even tin plate seems
to be no trouble at all.
Allison
IPhoned it in!
> On Aug 14, 2019, at 2:19 PM, Noel Chiappa via cctalk
> wrote:
>
> From: Jonathan (systems_glitch)
> Yep, fun times on LSI-11/2!
Heh, this one was _utterly trivial_ compared to the 'must have working memory
at 0 or ODT won't start'! (I don't think I've ever seen that one
On 7/29/19 10:30 PM, Jim Brain via cctalk wrote:
> On 7/29/2019 9:24 PM, allison via cctalk wrote:
>>
>> Since you replaced the batteries did you check the fuse?
> Yep, good.
>> Also the 4066s
> Hmm, all mine are soldered in. Do you suggest I desolder and che
l but there are many parts of
the regulators that can.
Hint do yourself a favor and expand and print the schematic as at least
B if not D size. it will be easier to follow.
Allison
On 7/29/19 10:30 PM, Jim Brain via cctalk wrote:
> On 7/29/2019 9:24 PM, allison via cctalk wrote:
>>
>> Since you replaced the batteries did you check the fuse?
> Yep, good.
THe batteries are charged? (about 6.6V or more full charge)
>> Also the 4066s
> Hmm, all mi
the CRT. Check the heater pins with a multimeter
to see if its open (unplug it as there is a transformer winding across
it). Mine needed one when I got it but they were available then (1977)
from NLS. Side effect of the hammer mechanic owner. Now it would be a
hunt though old tube brokers.
Allison
omes first but a copy in some
usable if not the best form is still better than "I hear there is a book
about it".
Based on that I've taken books and manuals that I know more exist and
shredded them to make copies or scan.
ON preservation:
Me I'd love to know what the engineering library (ML4-1) of DEC a
massive quantity of aperture cards went to. Generally If I needed
or wanted it it was available (during my time at DEC) if I had a
valid part or model number. To me that was a preserve at all costs
including the systems used to retrieve and print.
Allison
erence to the KT1-11B Memory address
extension (CPU option).
Allison
rn PC like. I'd add
anything you know about PCs is unlikely to be helpful at best and
can lead one down an unproductive path as PCs and most older non-PC
machines tend to not be similar (other than being a computer).
Allison
On 06/08/2019 10:37 PM, Noel Chiappa via cctech wrote:
> > From: Allison
>
> > ODT for the two systems are very different. .. KDF-11 the ODT is part
> > of the higher level code. The larger cards (11/23 and 23+) boot to
> > resident (ep)rom.
>
> A
he difference between the restart/run between the two.
If memory serves The KDF11 requires enough ram to have a few of the key
addresses in low memory operational.
There is a lot going on with the LSI-11 as it also initializes internal
and external RAM. At the time memory nearly always dynamic and require
refresh cycles before it is "on line".
The manuals detail it well.
Allison
> Noel
>
ector (HEX width). Use care, read up, and have fun.
Allison
Re: Modems and external dialers.
>
> On 6/4/19 8:30 PM, allison via cctalk wrote:
>> Keep in mins the hardware for auto dial required some for of micro and
>> that was a post 1974 thing for the most part.
>
> Why did it require a micro? Could the host not perform the functio
at was 1978ish.
A modem that could dial was maybe 1983-5 or so at affordable prices
(under 300$) for 300 baud.
Allison
On 05/31/2019 03:27 PM, Rod Smallwood via cctalk wrote:
>
> On 31/05/2019 19:40, allison via cctalk wrote:
>> On 05/31/2019 02:04 PM, Rod Smallwood via cctalk wrote:
>>> Hi
>>>
>>> Well I now have a bootable SCSI drive on my 11/93. Its not RSTS/E
using the suggested secondary controller
address. Then use the OS dependent tools for installing additional drives.
Allison
elves.
The contemporary memory cards did not self refresh and used the early
4K or 16K 16pin devices. Memory used for 11/23 (f11) and later
by then self refresh on the local card level was the norm and cut
bus traffic load.
Many of the functions were replicated as part of the T-11 CPU.
> I'
y new hardware that is not neutered. Mini/Micro-ITX board with
atom or celeron CPUs (really all that's needed) are cheap and easily
built up into linux boxes or if you must any of the older 32 bit
winders incantations.
Allison
]On 05/11/2019 11:22 AM, Douglas Taylor via cctech wrote:
> I un
On 05/11/2019 09:30 PM, ben via cctalk wrote:
> On 5/11/2019 6:28 PM, allison via cctalk wrote:
>
>> Not all were 74181 based, Thats an early 1972 part and but 1975 it was
>> already getting old though useful as it evolved to 74S and 74F series.
>> The 82s100
On 05/11/2019 07:14 PM, Warren Toomey via cctalk wrote:
> I'm building my own 8-bit CPU from TTL chips, and this caused me to think:
> how were 32-bit minis built in the late 70s and early 80s? In particular,
> how was the ALU built? I know about the 74181 4-bit ALU, and I know (from
> reading A
l distribution board (m8058)
out of BA123 to hook up
RD52, RX33, RX23 and never had issues due to addressing devices under RT11.
Is it possible you have a interrupt grant gap between the various boards
and the RQDX? That would cause a hang.
If you successful it makes using PUTR easier though RX50 works for that
too just smaller.
Allison
kely culprit is ethernet. Try
> disconnecting ethernet, perhaps the AUI, too, and see if it's any
> different.
>
> John
Last time I'd seen that another system on the network was jabbering...
it had a bad DEQNA.
Allison
On 04/29/2019 11:37 AM, Jon Elson wrote:
> On 04/29/2019 06:47 AM, allison via cctech wrote:
>> On 04/28/2019 09:28 PM, Grant Taylor via cctech wrote:
>>> On 4/28/19 6:27 PM, Ray Jewhurst wrote:
>>>> I already have a Hobbyist License. I am just interested in
>>
On 04/29/2019 09:41 AM, Paul Koning wrote:
>
>> On Apr 29, 2019, at 7:47 AM, allison via cctech
>> wrote:
>>
>> On 04/28/2019 09:28 PM, Grant Taylor via cctech wrote:
>>> On 4/28/19 6:27 PM, Ray Jewhurst wrote:
>>>> I already have a Hobbyist Lice
On 04/28/2019 09:28 PM, Grant Taylor via cctech wrote:
> On 4/28/19 6:27 PM, Ray Jewhurst wrote:
>> I already have a Hobbyist License. I am just interested in
>> experimenting with different OSes and different versions of OSes.
>
> ACK
>
> I don't know what VAX hardware VMS 1.5 supported, what
6 unix or maybe
RSX might be a better choice for anything networking. An OS that
supports swapping and maybe virtual memory
would help even at the expense of speed. Networking does require some
level of multitasking as well so RT-11/FB
is likely more useful than vanilla RT.
Allison
On 04/24/2019 08:47 PM, Al Kossow via cctalk wrote:
>
> On 4/24/19 5:46 PM, allison via cctalk wrote:
>
>> The 8049 is readable just like the 8048 save for 2k device. I worked
>> for NEC back then and had access to intel parts too.
> is that true for "HC" parts o
ternal rom/eprom
the test for that is pin7 EA, if EA is high then program access
is external. it was very common to use any 8048/49 in place of 8035/39
in a system and often cheaper due to misprogrammed
parts that can still be used with external rom.
FYI there are no "protection bits".
Allison
On 04/18/2019 04:19 PM, Noel Chiappa via cctalk wrote:
> > From: Allison
>
> > Experience is that an 11/23 or 23+ will run V6 as mine does.
>
> What changes did you make to get it to run? (I assume the stock binary
> wouldn't run.)
>
> Noel
Th
that an 11/23 or 23+ will run V6 as mine does. REason it
does is V6 does not require I support
The usual issue is not FPU for Unix as questioned but if there is a need
for I spaces. The 11/23 (f11 chipset)
does not support that but the J11 (11/73 and 11/83) do support that. I
have a 11/73 so I could run BSD and a few
others commonly found that require I support.
There may be other versions that place less of a burden on requiring I
However I've not encountered a need for FPU connected to OS. Also
the assumption for many unix is MMU support but not all DEC OS have
that requirement.
Allison
s the hot item as would be a RX50 or 1.44 3.5" floppy or
all three as it can interface not
less than two floppy drives.
Allison
re regularly for cheap fuel for the 150 and the mid
summer hit and miss engine show.
For me all of this and the mixx is anything but history as it was where
I worked for 10 years
and around the area long after.
Allison
>> On Apr 1, 2019, at 5:23 PM, Liam Proven via cctalk
>> wrote:
paint well a drier and regulator as best pressures are down
around 20 to maybe 40psi.
With lower pressure the need for additional tank and all not required.
I do a lot of work with an airbrush as its small volume and you can do
fine detail work very well.
Airbrushes also need lower volume of air so lower pressures require the
regulator.
Allison
file with all the
common tapes on it.
for loading into a 8 via a loader device.
I've not done this for PDP-8 or 11 but I can easily envision it. The
Arduinos are
often fast enough if not faster than the host so speed is not an issue.
Allison
with TMS1000, F8, and 8048 that would put all of the computer
functions on one chip.
The 8080/6502/6800/and friends were all multichip to realize even a
simple functioning system.
Oddly science fiction had computers but calculators were not part of
their forecast.. I know of
only one example that had pocket/portable calculator.
Allison
that might be scrapped. In itself thats
important
and it would be model independent.
Being a Qbus 11 collector there are still critters I might gather.
Allison
On 01/24/2019 10:38 AM, Ethan Dicks wrote:
> On Wed, Jan 23, 2019 at 8:41 PM Allison Parent via cctalk
> wrote:
>> On Jan 23, 2019, at 8:43 PM, Paul Koning via cctalk
>> wrote:
>>> On Jan 23, 2019, at 5:37 PM, Noel Chiappa via cctalk
>>> wrote:
>>>
the lsi11 are
The same right down to the handle. The prime difference
Is the heath backplane is smaller number of slots and user assembled along with
the case and power supply. The memory, io, and disk system
was all heath and could be used in dec backplanes and DEC cards in heath. The
heath disk w
On 01/12/2019 05:03 PM, Bill Gunshannon via cctalk wrote:
> On 1/12/19 4:30 PM, allison via cctalk wrote:
>> On 01/12/2019 04:14 PM, Bill Gunshannon via cctalk wrote:
>>> On 1/12/19 2:25 PM, allison via cctalk wrote:
>>>> On 01/12/2019 12:29 PM, Pete Turnbull via cct
On 01/12/2019 04:14 PM, Bill Gunshannon via cctalk wrote:
> On 1/12/19 2:25 PM, allison via cctalk wrote:
>> On 01/12/2019 12:29 PM, Pete Turnbull via cctalk wrote:
>>> On 12/01/2019 01:24, Zane Healy via cctalk wrote:
>>>
>>>> I’m pretty sure you cou
mostly 11/23(various flavors) based but have the
11/2 board and LSI-11. Even An H11 backplane with LSI-11 and Heath ram
and IO.
While there were many sold systems and a larger number of supported
systems Qbus PDP-11 was more mix and match than most any
and the early Qbus microVAX series did that for a while.
Allison
edestal. But even the
> one that shows rack mount installation is only BA23.
>
> bill
And my older manuals don't show anything other than BA11, later manuals
are useful for that reason.
Allison
On 01/11/2019 02:32 PM, Noel Chiappa via cctalk wrote:
> > From: Allison Parent
>
> > Most Probable cause is interrupt grant is broken.
>
> The only -11 that complains if the grant chain is broken that I know of is
> the /34 (maybe the /04 too). I certainly have a
Most Probable cause is interrupt grant is broken. For most microspheres
backplanes the first three slots are different than remaining.
Phoned this in!
On Jan 11, 2019, at 12:28 PM, Bill Gunshannon via cctalk
wrote:
Well, it has been so long since I had to put together an
entire system I
Looked...
Hartetechnologies.com
Look in Netronics folder.
Phoned this in!
On Jan 10, 2019, at 8:55 PM, Allison Parent wrote:
Seriously?
You haven’t looked. Start with bitsavers, then Dave dunfelds old computers.
That’s from memory as I’m on the phone.
iPhoned this in!
On Jan 10, 2019
Seriously?
You haven’t looked. Start with bitsavers, then Dave dunfelds old computers.
That’s from memory as I’m on the phone.
iPhoned this in!
On Jan 10, 2019, at 6:25 PM, Brad H via cctalk wrote:
Wondering if anyone has any EPROM dumps of Netronics' BASIC for the
Explorer/85. I'd like
On 01/08/2019 04:29 PM, Grant Taylor via cctalk wrote:
> On 01/08/2019 02:09 PM, allison via cctalk wrote:
>> Its actually funny. The password given is three yahoo (groups) hacks
>> ago (about 10 years) but the email address used was a public one way
>> reflector (
On 01/08/2019 03:41 PM, Grant Taylor via cctalk wrote:
> On 01/08/2019 01:25 PM, John Rollins via cctalk wrote:
>> That they found an address used only for a certain mailing list makes
>> it more interesting. Doing a quick Google search it looks like the
>> list archives can be searched through,
On 01/07/2019 07:25 PM, ben via cctalk wrote:
> On 1/7/2019 8:20 AM, allison via cctalk wrote:
> snip...
>> made though more likely 74F, AS, or LS variant and of course CMOS 74ACT
>> (and cmos friends) as I just bought a bunch. Dip is getting harder to
>> get but
>
On 01/07/2019 09:51 AM, Peter Corlett via cctalk wrote:
> On Sun, Jan 06, 2019 at 02:54:08PM -0700, ben via cctalk wrote:
>> On 1/6/2019 12:24 PM, allison via cctalk wrote:
>>> The small beauty of being there... FYI back then (1972) a 7400 was about
>>> 25 cents and
ere were more Z80 based machines (TRS-80 alone exceeded 250,000) than
PDP-11.
History guys, we are about history!
Allison
ems like DEC10 and other
persisted for a while. Also part of it was IO codes for the
EBDIC, Flexowriter, ASr33 (8level vs Baudot), and CRT terminals emerging
with mostly IBM or ANSI.
I am somewhat DEC and personal computer (pre IBM PC) centric on this as
they were he machines I got to see
and work with that were not in rooms with glass and white coated
specialists.
Allison
parts
was nearly that of a new truck (2100$)!. Compared the basic logic of
the 8e (only
three boards of SSI TTL) core/ram was the show stopper. About 7 years
later a 8K8
S100 ram was about (early 1979) 100$, by 1980 64kx8 was 100$. Moore's
law was
being felt.
The small beauty of being there... FYI back then (1972) a 7400 was
about 25 cents
and 7483 adder was maybe $1.25. Least that's what I paid.
Allison
On 01/03/2019 11:15 PM, Kyle Owen wrote:
> On Thu, Jan 3, 2019, 17:48 allison <mailto:allisonporta...@gmail.com> wrote:
>
>> I don't think this album has been forgotten; I have a copy, and I
>> know others with copies, too. It seems as though "Unplayed
On 01/03/2019 05:22 PM, Kyle Owen wrote:
> On Thu, Jan 3, 2019 at 3:29 PM allison via cctech
> mailto:cct...@classiccmp.org>> wrote:
>
> Those were likely with a PDP12 or LAB-8 with DAC board. The code
> actually is a roughly
> digital version of tones in 10 o
uential
words (waveforms) to
the DAC. Before that it was done setting link and clearing link bit
with a timing routine.
There was a version of that also for MINC-11 and I've see variant back
when that used multiple
DAC cards for stereo or multiple voices.
It was also a thing for the S100 8080/z80 set (using a DAC) and many
other systems
(Kim-1, Apple, Cosmac, Commodore).
Of course everyone here forgets the First Philadelphia Computer Music
Festival on vinyl from '78
with samples of computer played music. I run my copy on occasion just
to remember being there.
Allison
One of the DEC history things about the era was often engineering went
may different
directions at the same time making for a plethora of systems that were
or mostly
PDP-8ish like the PDP-12 that was PDP-8 and LINK. RICM has a really
pretty one.
Allison
wa.edu/~jones/pdp8/
Allison
quad full adder and 74181
ALU) in about 10 years. The computer
industry were the early consumers.
Allison
On 12/16/2018 11:39 PM, Will Cooke via cctalk wrote:
>
>
>
>
>
> On December 16, 2018 at 11:14 PM allison via cctalk
> wrote:
>>> On Sun, 16 Dec 2018, Norbert Kehrer via cctalk wrote:
>>>> I have not tested it, but I suppose, that also the PX-8 and
On 12/16/2018 11:56 PM, Fred Cisin via cctalk wrote:
>> On December 16, 2018 at 11:14 PM allison via cctalk
>> wrote:
>>>
>>>> On Sun, 16 Dec 2018, Norbert Kehrer via cctalk wrote:
>>>>> I have not tested it, but I suppose, that also the PX-8
well as it can help heat the room and
also power as in
makes the meter spin.
So much lathering and speculation about what and how. When the point is
totally missed.
Allison
torage problem such as replicating
a RF/DF32 multihead disk.
The cycle life is a limiting factor for things like swapping drums/disks
but for something that's
read mostly its ok.
Core is RAM, and not serial anyway.
Allison
On 12/16/2018 10:07 PM, ben via cctech wrote:
> On 12/16/2018 8:00 PM, allison via cctech wrote:
>
>> In the end, current generation CMOS ram is the easy out, battery is
>> small, cost is small, and
>> produces much less of the heat that is killer to systems.
xternal drives.
>
There are several software packages on the net to do the fake of the
disk via serial and manuals of the system to
explain the format. Likely that software could do the earlier HX20 (and
friends) with minor tweaks.
Allison
for Omnibus
with battery back up that is fine. Don;t get wraped around the axle
about RMW as any sufficiently
fast ram can do that without wearout. And compared to core it doesn't
take much speed.
EEprom and Flash work fine for read mostly disks or disk simulators.
Allison
On 12/13/2018 12:05 AM, Sean Conner via cctalk wrote:
> It was thus said that the Great allison via cctalk once stated:
>> On 12/12/2018 03:04 PM, Sean Conner via cctalk wrote:
>>> It was thus said that the Great allison via cctalk once stated:
>>>> The whole thing c
On 12/12/2018 03:04 PM, Sean Conner via cctalk wrote:
> It was thus said that the Great allison via cctalk once stated:
>> The whole thing comes from a project for myself...
>> I wanted a very basic screen based editor written in 8080/8085/z80 asm
>> and compact
>> (
On 12/12/2018 03:08 PM, Sean Conner via cctalk wrote:
> It was thus said that the Great allison via cctalk once stated:
>> The whole thing comes from a project for myself...
>> I wanted a very basic screen based editor written in 8080/8085/z80 asm
>> and compact
>> (
80char display that is a subset of Vt100/Ansii.
Its not 99cents but
at list prices under 7$ Monitor and keyboard not included.
Or you can use an arduino with a 40char by 4 line LCD.
Allison
On 12/12/2018 02:49 PM, emanuel stiebler via cctalk wrote:
> On 2018-12-12 14:41, allison via cctalk wrote:
>> The whole thing comes from a project for myself...
>> I wanted a very basic screen based editor written in 8080/8085/z80 asm
>> and compact
>> (as in under
or other programmers editors?
So now I'm going to have to write my own as the "world search tools" are
willfully dumb and stupid.
Allison
1 - 100 of 389 matches
Mail list logo
