eller can wrap it and place it on
> a pallet but cannot strap it down.
That sounds like a problem. If it's not strapped down, it is unlikely to stay
on the pallet.
Standard shipping straps may be hard to find for an amateur, but small truck
type webbing ratchet straps can be found at c
Hi Ali,
I've had a few things shipped lately and $250 isn't out of line. It's small
enough that you could try your luck on UShip; if you go that route the
pallet wouldn't be needed. If you use a traditional transporter, see if the
seller is willing to pick up a couple cheap nylon ratcheting tie do
Sometimes you eat the bear and sometimes the bear eats you -
http://abcnews.go.com/US/passenger-train-crashes-fedex-truck-shocking-video/story?id=45022454
On 11/26/2016 8:05 AM, Noel Chiappa wrote:
No; it just sailed right through. The fact that it was Canada->US probably
helped.
The US Customs can be jerks. But Made in USA on the unit trumped the BS
for me twice. It wasn't obvious in both cases, but once I showed it on
the device the foolish
.. They mostly ship antiques and
> > pianos and other items that can be fragile and not palleted
> > ...
> > Both were very competitively priced in my experience.
>
> Sounds like these were both so-called 'white glove' shippers, who do things
> like fu
experience, somewhat more expensive: when
I was shipping a pair of -11/84's from California to Virginia, the shipping
cost just about doubled when I had to switch from freight to 'white glove' for
them. Hence my advice to palletize stuff, and send it freight (at least for
cross-continent, where the difference really adds up).
Noel
e (which I paid for
including transport to and from the inspection station of course.)
For the OP, I've had good success shipping racks and an a keypunch with
integrated table, both unpalleted, via uShip. The key to use them is
specify everything in great detail (covered, unpalleted, etc) up fro
sk, i need the machines to be packaged up / put on a pallet at the pickup
> location, the owner is unable to do so. Usualy I would use YRC freight,
> however they do not offer the service to package the machines on site.
>
> Hopefully someone here can make a suggestion. Ive never dealt with
we liked our winstar that was on a taurus wagon chassis I was told...
wish we still had it hauled a lot of stuff in it!
currently have a subaru forester...unfortunately is is not as much
volume as the winstar with the seats out! I hear the outback has a
longer cargo ar
On 11/25/2016 05:49 PM, Noel Chiappa wrote:
I have discovered that a Ford Taurus wagon nicely holds an H960 6'x19" rack
(I joked that the car must have been designed by someone who collects old
gear :-), so I have been able to pick up a shipment consisting of _two_
H960's this way: one inside, an
e from Arizona, one from Toronto), and been very
happy with the results.
The shipping cost in the Arizona case may not have been the absolute lowest
possible I could have secured had I been on the spot, looking around, but.. I
wasn't on the spot, looking around; and it was pretty reasonable (
,
however they do not offer the service to package the machines on site.
Hopefully someone here can make a suggestion. Ive never dealt with shipping
something this large before. I did have a Microvax 3800 shipped with YRC
freight, however that was purchased through a business and was packaged
before
Cindy as in electronic plus?
Original message From: "Tapley, Mark"
I'm trying to help Cindy find homes for some of what's left from her
warehouse. I can hold them only temporarily ( :-) )
erests you please contact me via Private (not list) email at
mtap...@swri.edu.
If you do want something, send me your shipping address and exactly
what you want. I'll get back to you with estimated shipping costs (USPS media
rate where possible) as soon as I can. You send me payment
.
>
> Free for the cost of shipping (01888 metro-west Boston,MA , about 3 lbs
> each)
>
> Need the space, gotta go.
>
>
>
>
--
Matt Patoray
Owner, MSP Productions
KD8AMG
On Tue, Oct 18, 2016 at 12:34:50PM -0400, J wrote:
> I have two IBM 21F5093 AS/400 8-port twinax to DB25 adapters with clip
> mounts.
Maybe! I've been on the lookout for a 72X5645 which is a 4-port twinax
break out box. I supposedly need it for my AS/400 9406-170. (I have the
pig-tail and termin
I have two IBM 21F5093 AS/400 8-port twinax to DB25 adapters with clip
mounts.
Looks like the coil is about 14-16 feet of cable.
Pics on request.
Free for the cost of shipping (01888 metro-west Boston,MA , about 3 lbs
each)
Need the space, gotta go.
Thanks everyone who replied. The seller stopped communicating with me so
this time it's a no-go.
But I'm sure there will be a next time :)
/P
On 04/01/2016 11:48 AM, Pontus Pihlgren wrote:
Hi.
I'm considering to ship an empty full height rack from the USA to Sweden. It is
definitely somethin
n the US to Korea and the difference was $3000 for the
moving of the item in the US. Turned out that it was cheap for the
shipper to get the item to the port of LA and a lot of the $3000 was saved.
I think the item was larger than you had, but the shipping cost was in
the low hundreds for
When I moved from the US to Belgium we used http://upakweship.com/
You can ship a single pallet worth of stuff; the fees are done by
cubic volume, so you may want to load up that rack.
On Fri, Apr 1, 2016 at 11:53 AM, Mike Ross wrote:
> If you're in no hurry best bet is an international mover on
If you're in no hurry best bet is an international mover on
'consolidation' - basically it's delivered to the mover and it's
loaded in a shared container and it only moves once the container is
full. And if you can pick it up at the arrival end that saves big-time
too.
Mike
On Fri, Apr 1, 2016 at
Hi.
I'm considering to ship an empty full height rack from the USA to Sweden. It is
definitely something I wont find here so it might be worth the cost and effort.
What are my options to get it here safely? If you have any experience I would
greatly appreciate if you could share them.
Thanks i
Hi Guys
I have now seen the production batch of 8/e A and B. panels.
They will ship next week after inspection and packing. 8/f and 8/m will
be next up.
If you have placed an order for any of the above please confirm your
shipping address.
When I switched to the textured
.
https://twitter.com/NizarKrayem/status/560443201173983234
--Toby
- Original Message -
From: "Stefan Skoglund (lokal användare)"
To: cctalk@classiccmp.org
Sent: Tuesday, February 2, 2016 3:47:48 AM
Subject: Re: USPS: Shipping
mån 2016-02-01 klockan 22:22 -0600 skrev Tothwolf:
Skoglund (lokal användare)"
To: cctalk@classiccmp.org
Sent: Tuesday, February 2, 2016 3:47:48 AM
Subject: Re: USPS: Shipping
mån 2016-02-01 klockan 22:22 -0600 skrev Tothwolf:
> On Mon, 1 Feb 2016, Guy Sotomayor wrote:
> > On Feb 1, 2016, at 10:30 AM, Ken Seefried wrote:
>
mån 2016-02-01 klockan 22:22 -0600 skrev Tothwolf:
> On Mon, 1 Feb 2016, Guy Sotomayor wrote:
> > On Feb 1, 2016, at 10:30 AM, Ken Seefried wrote:
> >> On Sun, 31 Jan 2016, Tothwolf wrote:
> >>> On Sun, 31 Jan 2016, Pete Lancashire wrote:
> >>>
> Spend the extra few dollars (or what your cur
On Mon, 1 Feb 2016, Guy Sotomayor wrote:
On Feb 1, 2016, at 10:30 AM, Ken Seefried wrote:
On Sun, 31 Jan 2016, Tothwolf wrote:
On Sun, 31 Jan 2016, Pete Lancashire wrote:
Spend the extra few dollars (or what your currency is) and pack it in
very strong box. I've actually had EPROMs show up c
ipped it - until it was
pointed out that the hole was right through their shipping documents.
The very same thing happened to me with a washing machine sized box which
contained a computer rack. The hole was large enough where one of the
packages of mounting hardware/brackets got lost. The s
t; library.
> > The hole matched the fork on a forklift truck.
> > UPS insisted that the hole existed before they shipped it - until it was
> pointed out that the hole was right through their shipping documents.
>
> Yea, they’re response when I was talking to them, was “Well jus
insisted that the hole existed before they shipped it - until it was
> pointed out that the hole was right through their shipping documents.
Yea, they’re response when I was talking to them, was “Well just have the
shipper
send another one”. Yea, right. It’s hard to get them to appreciate that
t the hole was right through their shipping documents.
- Original Message -
From: "Guy Sotomayor"
To: "General Discussion: On-Topic and Off-Topic Posts"
Sent: Monday, February 1, 2016 10:43:40 AM
Subject: Re: USPS: Shipping
> On Feb 1, 2016, at 10:30 AM, Ken S
> On Feb 1, 2016, at 10:30 AM, Ken Seefried wrote:
>
> On Sun, 31 Jan 2016, Pete Lancashire wrote:
>>> On Sun, Jan 31, 2016 at 1:24 AM, Henk Gooijen
>>> wrote:
>>>
>>> Spend the extra few dollars (or what your currency is) and pack it in a
>>> very strong box. I've actually had EPROMs show up
I have two sealed C5718A tapes that are free to the first person to ask
for them and pay shipping. I hate to throw out something that may still
be useful.
Can mail them for $5 (I think) to the USA, or local pickup.
John :-#)#
--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5
I've been trying to get a PDP-8/m out of Fresno, CA for a few months
now; the person I'm getting it from is alternately unwilling and unable
to prep the machine for transport (the latest excuse is that he can't
find a suitable pallet).
This is a single full-height rack, probably about 500lbs -
All,
I'm trying to help Cindy find homes for some of what's left from her
warehouse. I can hold them only temporarily, but if any of this interests you
please contact me ASAP via Private (not list) email at mtap...@swri.edu.
If you do want something, send me you
I posted this about a week or so ago.
I bought a teletype in Elkorn, Wisconsin and need a volunteer to help with the
shipping;
Take it off the pedestal;
Put the shipping bolt in the printer;
Watch craters and freighters, that they have plenty of foam to cushion the unit.
I will pay you for
I have the following items that I want to get rid of. All are quantity one,
except the Poqets. They are free for shipping cost from Chicago (ZIP 60659). I
prefer to ship in the US, but will consider shipping internationally. Contact
me directly at r_a_feld...@hotmail.com if you are interested
Just tested the C16, Its free to anyone who wants it and can fix it.
Just pay shipping, Or if you are attending VCFMW I can put it in the
pile of stuff to come.
who talked of other freight
forwarders and shipping companies but can't find them now.
Any suggestions?
I know prices vary with zip codes.
Thanks, Paul
(CTS) since the 70s for padded van service and some
freight. I need some pallets moved and they quoted me today what I thought
was a rather high price.
I've seen here and talked with people who talked of other freight
forwarders and shipping companies but can't find them now.
Any sugge
arders and shipping companies but can't find them now.
Any suggestions?
I know prices vary with zip codes.
If it's already packed on pallets, I'd use freightquote
(freightquote.com). I've used them a
number of times and they're reasonable and you have more flexibility on
I've used move it (CTS) since the 70s for padded van service and some
freight. I need some pallets moved and they quoted me today what I thought
was a rather high price.
I've seen here and talked with people who talked of other freight
forwarders and shipping companies but can'
Hi Guys
I have started to ship 8/e front panels as of to-day.
I took some
to the shippers to-day and more will go to-morrow
Everybody who placed an order will get at least one from the first batch.
The next batch will be twenty panels.
Type B will be available and both round holes
On Jun 9, 2015, at 6:40 AM, Rod Smallwood wrote:
> 2, They are my Type A. (As photo)
There is no photo, the mailing list removes attachments. Could you put the
picture on http://imgur.com and send the link?
--
Follow me on twitter: @FozzTexx
Check out my blog: http://insentricit
pe on back)
3.The price is $95.00 + $15.00 Shipping (Customs and
State Taxes not included tape)
4. One per customer until this batch runs out
5.Next batch (20) due in 5-7 Working days + finished
item shipping time to US.
6.
101 - 145 of 145 matches
Mail list logo
