Thanks to the source code for the MAME DTC01 DECtalk driver, which is
apparently the only place there is any information on the self-test
error LED codes, I determined that there was a failed HM6264LP-12
static RAM chip. The error code narrows it down to a pair, and
swapping narrowed it down to a s
On 8/29/2016 8:24 PM, Fred Cisin wrote:
Folks,
I am going to be in San Francisco in a few weeks' time, but only
for about a
day and half. I could spare 2 hours at CHM but is it worth dragging
myself
up there on a Sunday when there are no working exhibits, and I will only
have two hours.
I got interested in a thread which mentioned RX02 emulators by C H
Dickman, and found a nice page on that, which is still live.
However, one of the pages was on geocities, and though there are about
10 or 15 hits for the path below, noone
had any links which i could find which hit the original
Folks,
I am going to be in San Francisco in a few weeks' time, but only for
about a
day and half. I could spare 2 hours at CHM but is it worth dragging myself
up there on a Sunday when there are no working exhibits, and I will only
have two hours.
You can easily spend two hours on the statio
On 08/29/2016 02:11 PM, Dave Wade wrote:
Folks,
I am going to be in San Francisco in a few weeks' time, but only for about a
day and half. I could spare 2 hours at CHM but is it worth dragging myself
up there on a Sunday when there are no working exhibits, and I will only
have two hours.
Yes
On Mon, Aug 29, 2016 at 7:43 PM, Noel Chiappa
wrote:
> > From: Josh Dersch
>
> > Wish the seller would part it out (and ship).
>
> So, send the seller an eBay message saying you're interested in some of the
> items, and you're in contact with other collectors who are interested in
> other
> From: Josh Dersch
> Wish the seller would part it out (and ship).
So, send the seller an eBay message saying you're interested in some of the
items, and you're in contact with other collectors who are interested in other
items, but: you don't want to buy the entire lot; and suggest to
a bit pricy, but it seems to be able to be powered up. Looks to be
25mhz according to the boot screen. The seller has done the smoke test
for the buyer, and was even going to replace a dead NVram to verify that
one message about the config being bad was recoverable.
16mb ram. Seller has do
> On Aug 29, 2016, at 6:27 PM, Rob Jarratt wrote:
>
> ...
> Thanks, I see that now. Definitely no compatibility :-(. Just need that
> logic analyser really to work out what is the matter with them both. When
> the 380 doesn't have the daughter board installed it leaves all the LEDs on
> to indic
On Sun, Aug 28, 2016 at 6:54 PM, Doug Fields wrote:
> http://www.ebay.com/itm/112102162849
>
> Looks like someone bought it all and is trying to resell the stuff I
> posted about earlier this month. The original seller asked for $1200 for
> the lot of it.
>
> Cheers,
>
> Doug
>
Isn't that the sa
That would be a good thing.
Also, from the "I can dream, can't I?" department would be the drawings for the
HSC50 and 70
On 8/29/16 10:10 AM, Paul Koning wrote:
> I have somewhere a printout (on 11x17 size paper, roughly A3) of the Pro 380
> motherboard schematics. I haven't seen those elsewhe
> -Original Message-
> From: Paul Koning [mailto:paulkon...@comcast.net]
> Sent: 29 August 2016 18:10
> To: r...@jarratt.me.uk
> Cc: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: DEC Pro 350/380 Memory Cards - Interchangeability?
>
>
> > On Aug 29, 2016, at 12:33 PM
Anytime you see something you have not seen before... it is
worthwhile ed#
Sent from my Verizon, Samsung Galaxy smartphone
Original message
From: Dave Wade
Date: 8/29/16 12:11 (GMT-07:00)
To: "General Discussion: On-Topic and Off-Topic Posts"
Subject
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Evan
> Koblentz
> Sent: 29 August 2016 20:24
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: CHM
>
> > I am going to be in San Francisco in a few weeks' time, but only for
> > a
I am going to be in San Francisco in a few weeks' time, but only for about a
day and half. I could spare 2 hours at CHM but is it worth dragging myself
up there on a Sunday when there are no working exhibits, and I will only
have two hours.
Yes.
Does anyone have a copy of the AT&T/WE DSP16A development tools
(assembler, etc) for DOS, and the devkit manual?
The actual DSP datasheets and architecture manuals are on bitsavers
(oddly, not in the same directory, which was confusing to find):
http://bitsavers.trailing-edge.com/pdf/att/dsp
On Mon, Aug 29, 2016 at 3:23 PM, Vincent Slyngstad wrote:
> From: Dave Wade: Monday, August 29, 2016 12:11 PM
>
>> I am going to be in San Francisco in a few weeks' time, but only for
>> about a
>> day and half. I could spare 2 hours at CHM but is it worth dragging myself
>> up there on a Sunday
From: Dave Wade: Monday, August 29, 2016 12:11 PM
I am going to be in San Francisco in a few weeks' time, but only for about a
day and half. I could spare 2 hours at CHM but is it worth dragging myself
up there on a Sunday when there are no working exhibits, and I will only
have two hours.
My w
Folks,
I am going to be in San Francisco in a few weeks' time, but only for about a
day and half. I could spare 2 hours at CHM but is it worth dragging myself
up there on a Sunday when there are no working exhibits, and I will only
have two hours.
Dave.
Hello Rob,
I think I found a link:
http://vaxhaven.com/images/a/a7/EK-PC380-PS-003.pdf
Andrea
Hey Rob (and anyone else sniffing signals),
I've been using a USB logic analyzer from Saleae (https://www.saleae.com/)
for years now and the software is really good. Way cheaper than a
standalone unit. I'm unsure if the inputs can handle more than 5v but you
could throw a divider network in front
They should really part it out, they could probably make more money and it
would be more likely to find a home.
Like that person in Denver, who waited until the last minute when he had to
empty his rental space and had an “Everything must go!!!” sale on his Macs — he
should’ve been putting them
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Paul Koning
Sent: Monday, August 29, 2016 1:10 PM
To: r...@jarratt.me.uk
Cc: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: DEC Pro 350/380 Memory Cards - Interchangeability?
I have somewhere
> On Aug 29, 2016, at 12:33 PM, Rob Jarratt wrote:
>
>
>
>> -Original Message-
>> From: Paul Koning [mailto:paulkon...@comcast.net]
>> Sent: 29 August 2016 15:08
>> To: r...@jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
>>
>> Subject: Re: DEC Pro 350/380 Memory Cards
> -Original Message-
> From: Paul Koning [mailto:paulkon...@comcast.net]
> Sent: 29 August 2016 15:08
> To: r...@jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: DEC Pro 350/380 Memory Cards - Interchangeability?
>
>
> > On Aug 28, 2016, at 5:11 PM, Rob J
They may have gone Dave McGuire was talking to him
http://www.vcfed.org/forum/showthread.php?53686-Price-Check-on-IBM-3277-Model-2-Display-Terminal&highlight=3277
Dave
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Mike Ross
> Sent: 29 August
> -Original Message-
> From: Paul Koning [mailto:paulkon...@comcast.net]
> Sent: 29 August 2016 15:08
> To: r...@jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: DEC Pro 350/380 Memory Cards - Interchangeability?
>
>
> > On Aug 28, 2016, at 5:11 PM, Rob
> -Original Message-
> From: Paul Koning [mailto:paulkon...@comcast.net]
> Sent: 29 August 2016 15:08
> To: r...@jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: DEC Pro 350/380 Memory Cards - Interchangeability?
>
>
> > On Aug 28, 2016, at 5:11 PM, Rob Ja
> On Aug 28, 2016, at 5:11 PM, Rob Jarratt wrote:
>
> I have a 350 and 380. Neither work. The 380 is reporting a possible memory
> error on the LEDs. Will the 350's memory work in a 380 (or vice versa)?
The 380 has memory on the motherboard, and a model-specific daughtercard for
expansion memo
On Mon, Aug 29, 2016 at 9:58 PM, Dave Wade wrote:
> Jim,
> If you check out my previous posts some one in California had 3277's on the
> VCFEED forums...
Wait... what? Where? I'm always looking for 3277s - and desperate for
3277 keyboards! (If anyone can help...)
Mike
http://www.corestore.org
On 2016-08-29 12:32 AM, Electronics Plus wrote:
http://www.ebay.ca/itm/201655050108?rmvSB=true
I can't believe no one has bid on this! I hope it goes to someone as the
complete set, not just for the keyboard!
Cindy Croxton
Item location says West Babylon, NY so not in Canada last ti
On 8/29/2016 2:58 AM, Dave Wade wrote:
Jim,
If you check out my previous posts some one in California had 3277's on the
VCFEED forums...
Thanks DAve. I will figure out my login on there and get on tomorrow.
There is a T-11 project with protected uploads that I want to look at.
I've got o
Jim,
If you check out my previous posts some one in California had 3277's on the
VCFEED forums...
Dave
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of jim
> stephens
> Sent: 29 August 2016 05:23
> To: General Discussion: On-Topic and Off-Topic Post
http://www.ebay.com/itm/112102162849
Looks like someone bought it all and is trying to resell the stuff I posted
about earlier this month. The original seller asked for $1200 for the lot of it.
Cheers,
Doug
> On Aug 6, 2016, at 5:16 PM, Doug F wrote:
>
> The woman didn't seem to be intereste
34 matches
Mail list logo
