If there's that much interest, it might be worth taking to a FedEx shop
and getting a high quality wide format scan.
Steve
On 12/10/22 3:27 PM, John Foust via cctalk wrote:
Well, she went for $810 to a map dealer in London, and he had to pay
about another $200 for the eBay global shipping prog
ments yourself.
Don Resor
Sent from someone's iPhone
On Dec 10, 2022, at 5:18 PM, steve shumaker via cctalk
wrote:
If there's that much interest, it might be worth taking to a FedEx shop and
getting a high quality wide format scan.
Steve
On 12/10/22 3:27 PM, John Foust via cctalk w
OK.. Now that you mention it, I do have a CBM PET question. I'm
searching for replacement key tops for the chicklet keyboard. There are
stems available (apparently 3d printed) on EPay but no caps. Any
suggestions on where to look? I have the keyboard and it seems a
little silly to spend
apologies for hijacking the "on topic" thread
Steve
On 12/21/22 10:55 AM, steve shumaker via cctalk wrote:
OK.. Now that you mention it, I do have a CBM PET question. I'm
searching for replacement key tops for the chicklet keyboard. There
are stems available (apparently 3d p
may seem, is to buy a complete PET
2001, take your 3 keycaps, and part the rest out. Preferably one that's in
crap shape. They aren't that uncommon.
Sellam
On Wed, Dec 21, 2022 at 10:56 AM steve shumaker via cctalk <
cctalk@classiccmp.org> wrote:
OK..Now that you ment
rry for encouraging inappropriate threads ;-)
m
On Wed, Dec 21, 2022 at 1:56 PM steve shumaker via cctalk <
cctalk@classiccmp.org> wrote:
OK..Now that you mention it, I do have a CBM PET question. I'm
searching for replacement key tops for the chicklet keyboard. There are
stems availa
well.. apologies - this was not intended for the list.
Steve
On 12/22/22 11:49 AM, steve shumaker via cctalk wrote:
No kidding! It has been a while. I've pretty much been lurking
without much to say here since I lost all my toys in the fires two
years ago. Managed to replace a c
Popped up in a search: A DEC LINC Eight up for auction in Friedens, PA.
https://hibid.com/lot/143159802/digital-equipment-corp-linc-eight-vintage
Currently has a single bid for $1.00 They are even offering shipping!
Visually looks to be in excellent shape
https://cdn.hibid.com/img.axd?
for the non mainframe folks here, what does SBU/SCU/SDU mean?
Steve
On 3/9/23 5:45 PM, Chuck Guzis via cctalk wrote:
On 3/9/23 17:33, Jon Elson via cctalk wrote:
On 3/9/23 15:51, Steve Lewis via cctalk wrote:
Well, the IBM 709x was housed in 11 or more cabinets that were larger
than the larges
Thanks!
Steve
On 3/9/23 7:54 PM, Chuck Guzis via cctalk wrote:
On 3/9/23 18:24, steve shumaker via cctalk wrote:
for the non mainframe folks here, what does SBU/SCU/SDU mean?
SBU-station buffer unit, but why not read about it in a contemporary
article by Chuck Purcell?
https://dl.acm.org/doi
that's still happening today. Up here in the north woods, trees in
lines is a weekly thing and the PGE supers will tell you directly to
"make sure you get EVERYTHING that we broke" but not to worry about
receipts.
steve
On 3/10/23 5:07 PM, Sellam Abraham via cctalk wrote:
On Fri, Mar 10, 20
FYI: DigiBarn is closed for good and all collections were transferred
to a museum back east.
Steve
On 3/12/23 9:51 AM, Steve Lewis via cctalk wrote:
I am visiting the Computer History Museum in California next week.
I always wanted to check it out and spend a day there, but something else
ha
Greetings sir!
Who can I email to inquire about being rejected from the listserver as spam?
Steve
On 7/10/22 10:38 PM, Dennis Boone via cctalk wrote:
Friends,
The process of migrating the cctalk and cctech mailing lists to a new
host in Chicago is underway. This evening, I've moved the list m
Any interest here before I post them to EPay?
Available for shipping cost from 95549:
IBM RT PC AIX OS Communications Guide 59X7668
IBM RT PC AIX OS Messages Reference 59X9115
IBM RT PC INED 59X7643
These are the classic early slipcase style manuals. They are in
pristine condition. All t
There used to be a running joke in the test center on Kwajalein Atoll
about the C141 full of mission tapes having a higher bit rate than the
undersea cable connecting us to the mainland.
Steve
On 5/5/23 7:39 PM, Chuck Guzis via cctalk wrote:
I do remember the bad old days, when even a leased
A mostly similar variation has it that they shipped the unit via Railway
Express Agency (remember REA??) and as the story goes, it was in
transit when REA closed their doors unexpectedly and with no warning,
went bankrupt.
Steve
On 5/9/23 11:47 AM, Sellam Abraham via cctalk wrote:
On Tue,
Saved some Data I/O manuals from the dumpster when a local firm tech
pubs library closed down. Manuals are loose sheet style in original
Data I/O 3 ring binders. Except as noted, they are lightly used in
very good condition and appear to be complete.
29B Universal Programming System Opera
On 5/14/2017 11:18 AM, Fred Jan Kraan via cctalk wrote:
On 14-05-17 19:00, steve shumaker g wrote:
> Saved some Data I/O manuals from the dumpster when a local firm tech
> pubs library closed down. Manuals are loose sheet style in original
> Data I/O 3 ring binders. Except as noted, they
On 7/15/2017 2:16 PM, Sam O'nella via cctech wrote:
Celebrate with a cake with 8 candles (1000)
Thats great. I guess i should scour the archives and maybe im holding on to
original books that arent as important anymore.
null
Actually that does trigger a thought... Is there a (simple) way to g
On 7/18/2017 11:33 AM, Al Kossow via cctech wrote:
On 7/16/17 7:44 PM, steve shumaker via cctalk wrote:
Actually that does trigger a thought... Is there a (simple) way to get a list
of the scanned ones?
fgrep _dataB IndexByDate.txt |sort -k 3
gets you a sorted list the current uploaded
On 8/10/2017 2:05 AM, Fritz Chwolka via cctalk wrote:
Hi..
I go some SAGE computers as the owner wants to go back to GB. As he has
collected a lot of documents I was told about the website
www.sageandstride.org. Sadly this side was gone and even my try to get
in contact with the site owner has n
found as part of the stack saved from an engineers estate: Tandem
Computers cartridge tapes and docs
Cartridges are appox 4x4x1 and the tape appears to be half inch. Some
are in boxes marked "Cartridge Tape CT-130" All have labels indicated
they are Tandem Computers "Site Update Tapes" with
On 10/14/2017 10:42 AM, Camiel Vanderhoeven wrote:
On 10/14/17, 7:22 PM, "cctalk on behalf of steve shumaker via cctalk"
wrote:
found as part of the stack saved from an engineers estate: Tandem
Computers cartridge tapes and docs
Cartridges are appox 4x4x1 and the tape appears
On 10/14/2017 12:39 PM, Jon Elson wrote:
On 10/14/2017 12:22 PM, steve shumaker via cctalk wrote:
found as part of the stack saved from an engineers estate: Tandem
Computers cartridge tapes and docs
Cartridges are appox 4x4x1 and the tape appears to be half inch. Some
are in boxes marked
On 10/14/2017 1:33 PM, Camiel Vanderhoeven wrote:
On 10/14/17, 7:55 PM, "cctalk on behalf of steve shumaker via cctalk"
wrote:
On 10/14/2017 10:42 AM, Camiel Vanderhoeven wrote:
On 10/14/17, 7:22 PM, "cctalk on behalf of steve shumaker via cctalk"
wrote:
found as par
On 10/14/2017 6:45 PM, Lyle Bickley wrote:
On Sat, 14 Oct 2017 13:00:30 -0700
steve shumaker via cctalk wrote:
On 10/14/2017 12:39 PM, Jon Elson wrote:
On 10/14/2017 12:22 PM, steve shumaker via cctalk wrote:
found as part of the stack saved from an engineers estate: Tandem
Computers
On 10/14/2017 6:45 PM, Lyle Bickley wrote:
On Sat, 14 Oct 2017 13:00:30 -0700
steve shumaker via cctalk wrote:
On 10/14/2017 12:39 PM, Jon Elson wrote:
On 10/14/2017 12:22 PM, steve shumaker via cctalk wrote:
found as part of the stack saved from an engineers estate: Tandem
Computers
On 10/15/2017 8:53 PM, Mike Stein via cctalk wrote:
Thanks, Brent; file received, sounds like a Challenge(r)
;-)
There's also a YouTube video showing a plot of a Czech steam locomotive; I
don't suppose anyone knows where the file might be found?
m
- Original Message -
From: "Brent H
Free for shipping from 95006, a stack of original IBM documents for the
S/360 including Field Engineering Manuals and Systems Reference Library
documents plus others - dumpster rescues from an engineer's estate. All
have been hi res scanned.
Titles from the IBM Systems Reference Library as we
On 11/23/2017 4:28 PM, steve shumaker via cctalk wrote:
Free for shipping from 95006, a stack of original IBM documents for
the S/360 including Field Engineering Manuals and Systems Reference
Library documents plus others - dumpster rescues from an engineer's
estate. All have been h
On 11/27/2017 2:26 PM, Fred Cisin via cctalk wrote:
The Livermore Data Systems modems that I sold off were from about 1964?
On Mon, 27 Nov 2017, Brent Hilpert via cctalk wrote:
Were those the Livermore Data Systems modems in a wood box you were
selling?
Did you have anything to ascertain the 1
On 11/27/2017 2:26 PM, Fred Cisin via cctalk wrote:
The Livermore Data Systems modems that I sold off were from about 1964?
On Mon, 27 Nov 2017, Brent Hilpert via cctalk wrote:
Were those the Livermore Data Systems modems in a wood box you were
selling?
Did you have anything to ascertain the 1
yo Chuck! I'll make a home for the Z-World SBC if it's still unclaimed.
Steve Shumaker
On 12/19/2017 5:44 PM, Chuck Guzis via cctech wrote:
Discovered a Z-World "Tiny Giant" SBC220D development board. Seems to
work; if powered on, the LED blinks. Its a Zilog Z180 board--and I can't
remember
That would be the Imsai 8K BASIC? If so, I have the assembler listing
as part of the Imsai manual set.
Steve
On 6/28/23 7:43 PM, Bill Degnan via cctalk wrote:
Anyone have the 2716 ePROM listing for IMSAI Basic. Version 1.4 or
whatever. I once had it, can't find my copy. If not 2716, I'll t
Sorry then, This is the assembly source listing.
Steve
On 6/28/23 8:00 PM, Bill Degnan via cctalk wrote:
Steve
I was looking for the original prom listing format files. Not sure if
theyre 1702 2708 2716 or ??
On Wed, Jun 28, 2023, 10:51 PM steve shumaker via cctalk <
cctalk@classiccmp.
what's your source for this?
On 7/19/23 7:35 PM, Murray McCullough via cctalk wrote:
Maybe this note is off topic but I don't think so: The death of Kevin
Mitnick. His book "Ghost in the Wire" is a classic. Too bad he was a
criminal!
Murray 🙂
Do you know of a source for drivers and software for the PC environment
for this equipment? I was recently given a 1054 which is supposedly the
same system with a SCSI interface. I've yet to find anything online.
Any suggestions would be most appreciated!
Steve
On 9/25/23 4:03 PM, js--- vi
Greetings all.. I'm looking for a Qualstar 1260S 1/2" tape system to
review/recover data from a stack of early Landsat tapes that I came into
a while back. I'd prefer the Qualstar SCSI system for familiarity but
basically I'm looking for a SCSI unit that can read 6250 GCR tapes. I'd
prefer
1054
worked without a hitch on the first try with a blank tape so I have a
nice little 3200 tape system and a big grate of tapes it can't read...)
On 11/14/23 4:34 PM, Chuck Guzis via cctalk wrote:
On 11/14/23 16:12, steve shumaker via cctalk wrote:
Greetings all.. I'm looking fo
Thanks for the suggestion! If I can't find a solution, I may reach out
to him.
On 11/14/23 5:11 PM, Van Snyder via cctalk wrote:
On Tue, 2023-11-14 at 16:12 -0800, steve shumaker via cctalk wrote:
Greetings all.. I'm looking for a Qualstar 1260S 1/2" tape system to
review/re
Greetings!
Based on the comment in a message posted last fall, I downloaded and
installed the Overland Data Depot4 software that was mentioned during a
discussion of SCSI tape tools. But so far I've been stumped in getting
it to work. Basic system is a freshly set up Win98SE and an Adaptec
Would you consider parting with it? I've actually got the 1052S up and
working with the Depot4 software but I'm still looking for a 6250 unit.
Steve
On 2/8/24 8:22 AM, Chuck Guzis via cctalk wrote:
On 2/7/24 22:59, Nico de Jong via cctalk wrote:
Maybe you dont know, but all the Qualstars I'v
Thanks for the comments and suggestions! The issue turned out to be an
ASPI config problem in the startup files. Depot4 fired right up once it
saw the ASPI driver.
Steve
On 2/9/24 7:26 PM, jim stephens via cctalk wrote:
On 2/8/24 00:59, Nico de Jong via cctalk wrote:
Maybe you dont know,
and, if you inquire in the right places, there is law enforcement
focused forensic analysis software specifically designed to acquire RAID
volumes and rebuild the data.
Steve
On 3/26/24 9:48 AM, Paul Koning via cctalk wrote:
On Mar 26, 2024, at 10:08 AM, Bill Gunshannon via cctalk
wrote:
4 12:22 PM, Paul Koning via cctalk wrote:
On Mar 26, 2024, at 2:59 PM, steve shumaker via cctalk
wrote:
and, if you inquire in the right places, there is law enforcement focused
forensic analysis software specifically designed to acquire RAID volumes and
rebuild the data.
Steve
Yes, thoug
Company (Polyphaser) web page doesn't seem to list that handbook as an
available lit product. Can you suggest a source?
Steve
On 4/2/24 8:13 AM, Paul Koning via cctalk wrote:
On Apr 2, 2024, at 11:01 AM, Jon Elson via cctalk wrote:
On 4/2/24 00:03, Just Kant via cctalk wrote:
Accordimg
Thanks!
Steve
On 4/2/24 9:37 AM, Paul Koning wrote:
On Apr 2, 2024, at 11:54 AM, steve shumaker via cctalk
wrote:
Company (Polyphaser) web page doesn't seem to list that handbook as an
available lit product. Can you suggest a source?
Steve
On 4/2/24 8:13 AM, Paul Koning via c
q8
Steve
On 10/26/2018 7:39 PM, steve shumaker via cctalk wrote:
OK, got it. Will be my first one. Now, how does one transport the
thing? Does it easily come off the pedestal? Can it be laid on
it's back? Anything need to be secured before it gets moved?
Steve
n 10/24/2018
acks in the cover
under the hood photos here for the curious:
https://photos.app.goo.gl/endqTANG3mZgWG3q8
Steve
On 10/26/2018 7:39 PM, steve shumaker via cctalk wrote:
OK, got it. Will be my first one. Now, how does one transport the
thing? Does it easily come off the pedestal? Can it be
Is there anyone on list in or near Orem UT willing to pick up a couple
smallish boxes (Looks like "book cartons" or similar) that the seller is
unwilling to ship?
Reply off list if interested/willing
Steve Shumaker
Boulder Creek, CA
OK...?? it isn't Versatec or Calcomp but it is early HP.?? It's a
DesignJet 755CM.?? HP part number is C3198B.?? It was fully functional and
in weekly used when finally taken out of service but it's been sitting
for 20+ years in inside storage and it needs a new home. I haven't fired
it up as i
Apologies for the question marks in the previous post - Thunderbird
reverts occasionally. test It should be fixed now.
Steve
On 11/25/19 2:14 PM, Richard Pope via cctalk wrote:
Will,
Good one. LOL! :)
GOD Bless and Thanks,
rich!
On 11/25/2019 4:10 PM, William Donzelli via cctalk wrote:
Oh goody; when the "intranet" vs. "an internet" vs. "The Internet"
discussion finally gets boring we can argue over the meaning
Classic heavy duty HP Designjet 755CM C3198B in search of a new home as
it's now one stop short of the e-waste people.
It's large (handles a 36in roll) and has the usual DesignJet stand.
I can even include some NOS ink cartridges.
It would need a horizontal belt as they deteriorate even
On 4/15/2018 11:37 AM, Alan Perry via cctalk wrote:
On 4/15/18 11:30 AM, Bill Gunshannon via cctalk wrote:
On 04/15/2018 01:44 PM, Ed Sharpe via cctalk wrote:
wish this was closer! ed#
Me too. I could use an Alpha or two for running VMS.
Where are you? I am picking up the Alphas so th
OK... I'll speak up. If no one claims the keypunch, I want it if
you're able to pick it up and hold it for a few months.
Steve Shumaker
Boulder Creek
On 4/15/2018 12:40 PM, Alan Perry via cctalk wrote:
How big is the keypunch? Where are you?
I am willing to make a second trip down (I am i
On 5/5/2018 10:23 AM, Pete Lancashire via cctalk wrote:
Core temp was a big issue even in commercial environments. You didn't see
it temp but you would see core [driver] current.
My 360/50 panel has the ability to monitor and adjust in real time the core
current.
Military or extreme environment
Anyone know a source for replacement hard molded wheels that would fit a
MicroVax 4000 low profile cabinet base? I'm missing two and the other
two may as well be gone given how functional they are. Mounting
hardware is still intact, it's just the wheels that I need..
Steve Shumaker
Ok.. I'll bite... Is the CDC/clone system spoken for yet?
Steve Shumaker
On 9/21/2018 7:44 PM, Bob Rosenbloom via cctalk wrote:
I have four 9-track tape drives, and a dirty DEC rack, that I need to
get rid of.
Two of the drives are HP 7970B's. One has the door unattached. Then
there's a
If you can hold it until the 6th, I can pick it up either Sat or Sun.
Steve
dOn 9/22/2018 2:21 PM, Bob Rosenbloom via cctalk wrote:
No, it's still available, come get it!
Bob
On 9/22/2018 1:35 PM, steve shumaker via cctalk wrote:
Ok.. I'll bite... Is the CDC/clone system spok
so.
Bob
On 9/23/2018 1:03 PM, steve shumaker via cctalk wrote:
If you can hold it until the 6th, I can pick it up either Sat or Sun.
Steve
dOn 9/22/2018 2:21 PM, Bob Rosenbloom via cctalk wrote:
No, it's still available, come get it!
Bob
On 9/22/2018 1:35 PM, steve shumaker via cc
On 10/5/2018 9:43 AM, Bill Degnan via cctalk wrote:
On Fri, Oct 5, 2018 at 12:42 PM Bill Degnan wrote:
Al, so you're saying, "yes please scan the MPI 91/21 product manual"?
MPI 91/92 I meant.
I've scanned something called the "MPI Flexible Disk Drive Interfacing
Guide" for the Model 51/52
cctalk wrote:
On Fri, 5 Oct 2018, steve shumaker via cctalk wrote:
I've scanned something called the "MPI Flexible Disk Drive
Interfacing Guide" for the Model 51/52 floppy units
Is that the same as:
http://www.osiweb.org/manuals/MPI_B51-B52_Product_Manual.pdf
?
Q: Is the 91/92 be
OK, got it. Will be my first one. Now, how does one transport the
thing? Does it easily come off the pedestal? Can it be laid on it's
back? Anything need to be secured before it gets moved?
Steve
n 10/24/2018 6:56 PM, Bill Degnan via cctalk wrote:
https://www.ebay.com/itm/Teletype-Machi
7/2018 6:46 AM, Bill Degnan via cctalk wrote:
On Fri, Oct 26, 2018, 11:31 PM Tony Duell via cctalk
wrote:
On Sat, Oct 27, 2018 at 3:38 AM steve shumaker via cctalk
wrote:
OK, got it. Will be my first one. Now, how does one transport the
thing? Does it easily come off the pedestal? Can it
On 10/31/2018 4:58 AM, geneb via cctech wrote:
On Tue, 30 Oct 2018, John Foust via cctalk wrote:
At 04:29 PM 10/29/2018, geneb via cctalk wrote:
There's a ton of them on the IA already. I would /love/ to get the
early ones. My collection begins at 1997 so I would *eagerly* take
anything pre
66 matches
Mail list logo
