Hi list,
I'm new to Centos and I've a very small knowledge of selinux use.
I can disable it, but I prefer take it on for study.
I've a second mirrored device that I use for file sharing.
This is the scenario:
/dev/md2 mounted on /mnt/data
To make samba working I must set the file context to
Hi there,
I'm new to Centos. I've installed version 6.5 x86_64. I'm coming from
slackware/debian utilizzation environment. I'm trying to setup libvirt
and qemu-kvm, but I have some problems.
I've different vms (2 centos, 2 slackware, 3 Debian) and I'm trying to
import all of them.
I want
with
centos qemu-img] - [qcow2 supported].
Solved.
Il 05/05/2014 12:58, Alessandro Baggi ha scritto:
Hi there,
I'm new to Centos. I've installed version 6.5 x86_64. I'm coming from
slackware/debian utilizzation environment. I'm trying to setup libvirt
and qemu-kvm, but I have some problems
Hi list,
I'm planning to setup a two-node cluster with file replication and samba.
I've used drbd in the past with success, but now there isn't drbd on
the official repo but only from elrepo. I want follow centos Line and
than switch to GlusterFS.
Said that, I'm new to GlusterFS.
I have two
Hi list,
I've a problem with my system on CentOS 6.5 x86_64 on a workstation.
During utilizzation, after several hours after boot (6/7 hours) I get an
error:
Disabling IRQ #16
and after this seems be that 3d acceleration is unloaded.
This is a workstation with a dedicated vga (nvidia gt450)
in advance.
Il 19/05/2014 15:24, Reindl Harald ha scritto:
Am 19.05.2014 15:20, schrieb Alessandro Baggi:
Hi list,
I've a problem with my system on CentOS 6.5 x86_64 on a workstation.
During utilizzation, after several hours after boot (6/7 hours) I get an
error:
Disabling IRQ #16
Hi list,
I'm new to clustering, and I'm running a little cluster@home. The
cluster is running on a workstation hardware and running on Centos 6.5.
Component: corosync, pacemaker, drbd and pcs. All works good.
This cluster has different resources:
1) drbd0
2) drbd1
3) drbd0_fs
4) drbd1_fs
5)
Hi Digimer,
there is a chance to make fencing without hardware, but only software?
Il 15/06/2014 17:28, Digimer ha scritto:
On 15/06/14 08:54 AM, Alessandro Baggi wrote:
Another question is about fencing. I've ridden that a cluster must have
fencing to be considered as such. On CentOS 6.5
the analogy that in the 18 years I've driven a car,
I've never needed my seat belt or airbags. I still put my seatbelt on
every time I go anywhere though, and I won't buy a car without airbags. ;)
Earlier, Alessandro Baggi wrote:
there is a chance to make fencing without hardware, but only software
Hi list,
I'm trying Centos7 and using systemD. I've noticed that interfaces name
does not have anymore eth0,eth1, ethN but a different name.
What do you think about predictable network if name assigned by systemd?
___
CentOS mailing list
On 09/24/2014 10:20 AM, Reindl Harald wrote:
Am 24.09.2014 um 16:04 schrieb Alessandro Baggi:
I'm trying Centos7 and using systemD. I've noticed that interfaces name does
not have anymore eth0,eth1, ethN but a
different name.
What do you think about predictable network if name assigned
Hi list,
I need a new mobo for my workstation.
I'm planning to buy Asus Z97K or Asus Z97 Pro and install Centos 7.
Anyone has experiences with these mobos?
I need to know if Z97 chipset and NIC Realtek 8111GR are supported by C7.
Another question about Intel I218V NIC installed on Asus Z97
Hi there,
I've installed C7 and I'm trying to use targetcli and other.
Until yesterday all works good.
Today I've runned yum update, that has updated glibc. Then I installed
targetcli and targetd. After some operation on an md device like
mount/umont.
After this, during yum install lsof I get:
On 12/22/2014 02:39 PM, Mark Milhollan wrote:
On Mon, 22 Dec 2014, Alessandro Baggi wrote:
File /usr/lib/python2.7/site-packages/yum/fssnapshots.py, line 156, in
__init__
self._vgnames = _list_vg_names()
File /usr/lib/python2.7/site-packages/yum/fssnapshots.py, line 59
On 12/22/2014 03:01 PM, Nicolas Thierry-Mieg wrote:
On 12/22/2014 02:54 PM, Alessandro Baggi wrote:
On 12/22/2014 02:39 PM, Mark Milhollan wrote:
On Mon, 22 Dec 2014, Alessandro Baggi wrote:
File /usr/lib/python2.7/site-packages/yum/fssnapshots.py, line
156, in
__init__
self._vgnames
On 01/26/2015 06:48 PM, Ken wrote:
I'm configuring apache with https and I've a question about sslv3
deactivation.
Running openssl ciphers -v I get a list of cypher suite of openssl
like:
ECDH-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH/RSA Au=ECDH Enc=AESGCM(128)
Mac=AEAD
.
SSLProtocol
Hi list,
I'm configuring apache with https and I've a question about sslv3
deactivation.
Running openssl ciphers -v I get a list of cypher suite of openssl like:
ECDH-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH/RSA Au=ECDH Enc=AESGCM(128)
Mac=AEAD
.
Each lines report relative protocol.
Hi list,
I have updated C7 to 7.1 and get some issue (I don't know if problems
depend from upgrade).
My first problem is on virt-manager that crash after some time. From system
messages I get that virt-manager is crashed with signal sigsegv and this
problem is related to python (python get
Il 07/05/2015 11:24, Marcin Trendota ha scritto:
W dniu 06.05.2015 o 21:21, Alessandro Baggi pisze:
What do you mean about Backup PC?
Any experiences?
What solution do you use?
BackupPC is good, howewer it's a pity you can't search for a file in
GUI. But it works well, i'm backing up 32
Il 07/05/2015 00:47, John R Pierce ha scritto:
On 5/6/2015 1:34 PM, Valeri Galtsev wrote:
My assistant liked backuppc. It is OK and will do decent job for really
small number of machines (thinking 3-4 IMHO). I run bacula which has
close
to a hundred of clients; all is stored in files on RAID
I list,
I'm new with backup ops and I'm searching a good system to accomplish this
work. I know that on centos there are bacula and amanda but they are too
tape oriented. Another is that they are very powerfull but more complex. I
need a solution for small office for disk storage and I found
Hi there,
In my last request I have asked info about backuppc and other backup
solutions. After some test I have choosen bacula. Many people said it's too
complex and try to make it works is a challenge. I've tested backuppc and I
don't like it for a stupid reason... I must install on centos
and configure...but when you use
samba, you need only samba pkgs and they work.
Il 11/mag/2015 21:05, John R Pierce pie...@hogranch.com ha scritto:
On 5/11/2015 11:49 AM, Alessandro Baggi wrote:
I must install on centos external
software, configure a web server with cgi with suid enabled (apache
Il 07/05/2015 11:55, Marcin Trendota ha scritto:
W dniu 07.05.2015 o 11:46, Alessandro Baggi pisze:
I don't know why and don't know if in previous CentOS releases was
included.
It is in EPEL.
BackupPC is available for C7 from nux repo, but this is an external repo.
Good enough, thanks
John, are you using c6? I have c7 and epel, nux repo and can't find this
packages on these repo. Only backuppc on nux repo.
Il 11/mag/2015 23:26, John R Pierce pie...@hogranch.com ha scritto:
On 5/11/2015 1:28 PM, Alessandro Baggi wrote:
To install backuppc perl is required,
to install File
Il 14/05/2015 19:46, James Hogarth ha scritto:
On 14 May 2015 16:12, Alessandro Baggi alessandro.ba...@gmail.com wrote:
Il 14/05/2015 13:40, Tris Hoar ha scritto:
On 14/05/2015 10:16, Alessandro Baggi wrote:
Hi List,
I've installed C7.1 and today configuring fstab for another disk I get
Il 14/05/2015 13:40, Tris Hoar ha scritto:
On 14/05/2015 10:16, Alessandro Baggi wrote:
Hi List,
I've installed C7.1 and today configuring fstab for another disk I get
this:
UUID=d5ff30df-9e1d-4fc8-99b6-845ffa6509db / xfs
defaults0 0
UUID=052f75bc-0513-45e0-a01f
Hi List,
I've installed C7.1 and today configuring fstab for another disk I get this:
UUID=d5ff30df-9e1d-4fc8-99b6-845ffa6509db / xfs
defaults0 0
UUID=052f75bc-0513-45e0-a01f-06c9a698469f /mnt/data xfs
defaults0 0
directory takes precedence over the former, and rpm will never
overwrite it. If you want to use the distributed service file again you
can simply delete (or rename) the service file in /etc/systemd/system again.
This is the way?
On 04/16/2015 12:46 PM, Alessandro Baggi wrote:
Hi list
in advance.
On 04/15/2015 07:14 PM, James Hogarth wrote:
On 15 Apr 2015 13:22, Dennis Jacobfeuerborn denni...@conversis.de wrote:
On 15.04.2015 12:41, Alessandro Baggi wrote:
Hi there,
Yesterday I've updated from 7 to 7.1 and today I've noticed on 2 server
that postgresql systemd file
Hi there,
Yesterday I've updated from 7 to 7.1 and today I've noticed on 2 server
that postgresql systemd file was replaced with default values. This make
postgres to no start and webserver give me problem. This problem was
fixed and now all works good. It's normal that on major update I can
Hi list,
I'm trying to monitoring bacula (dir, sd and fd) with nagios and plugin
check_bacula. check_bacula was installed from repo base, current OS C7.1.
When running check_bacula I get error with authentication:
BACULA CRITICAL - Cannot authenticate to Director: 1999 Authorization
failed.
Hi list,
what solution do you use for virtualizzation?
thanks in advance.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
What do you think about Proxmox VE?
ESX(i) 6 and vCloud Air. At home, KVM and Vagrant.
On Tue, Jun 16, 2015 at 10:46 AM, Numan Fatih YARCI
fatih.ya...@linux.org.tr wrote:
KVM - Vagrant - Docker :)
On Tue, 16 Jun 2015 at 17:41 Alessandro Baggi alessandro.ba...@gmail.com
wrote:
Hi list
Please don't top-post with fully quoting all previous content. This is a
mailinglist.
Proxmox VE is based on Debian. What does this have to do with CentOS? As
it makes use of KVM you can run CentOS on top of it as a virtualization
guest.
Alexander
Hi list,
I've a problem using PHP mkdir() with apache on C7.
I'm trying to create a directory under a specified directory in the tree
of my vhost, and mkdir create this directory but when I try to create a
file in this dir I get error on permission.
For directory creation I use permission 0777
Hi list,
I've installed C 7.1.1503 and I've noticed that simple user can run from
bash shutdown -h now/reboot without getting special permission (sudo,
su). The machine is a VM without GUI (tested also on physical machine).
From reddit I've got a suggestion: removing/comment out "-session
Il 22/10/2015 10:49, John Hodrien ha scritto:
On Thu, 22 Oct 2015, Alessandro Baggi wrote:
Hi list,
I've installed C 7.1.1503 and I've noticed that simple user can run
from bash shutdown -h now/reboot without getting special permission
(sudo, su). The machine is a VM without GUI (tested also
Hi list,
how to perform a differential backup using rsync?
On web there is a great confusion about diff backup concept when
searched with rsync.
Users says diff because it copy only differences. For me differential is
backup from last full backup.
Other users says that to perform a
Hi Fabio,
thanks for your reply. (I'm new with bacula).
To make things more clear:
1) Reinstall CentOS and software;
2) Configure database and import catalog
3) Copy last valid configuration for dir, sd,fd and console.
4) Re-attach my disk backup device with last volumes
That's all?
Another
Il 02/12/2015 16:31, m.r...@5-cent.us ha scritto:
Alessandro Baggi wrote:
Hi Fabio,
thanks for your reply. (I'm new with bacula).
To make things more clear:
1) Reinstall CentOS and software;
Why? This isn't Windows, so why reinstall CentOS, or are you building a
new system, or migrating one
Hi list,
I've a bacula system based on disk volume that I need to refresh (new
install). There is a way to mantain the "current status" (volumes,
catalog and other if needed) when migrating the system to a new
installation?
Thanks in advance
___
Il 07/06/2016 21:35, Keith Keller ha scritto:
On 2016-06-04, Alessandro Baggi <alessandro.ba...@gmail.com> wrote:
i've need to backup a partition of ~200GB with a local connection of 8/2
mbps.
Tool like bacula, amanda can't help me due to low bandwidth in local server.
I'm thinking
Fri, Jun 3, 2016 at 8:11 PM, Alessandro Baggi
<alessandro.ba...@gmail.com
wrote:
Hi list,
I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic).
I've tried to search on google about support on C7 but can't fine
anything.
There is a way to check if supported?
Is the Realtek 8111GR s
Hi list,
i've need to backup a partition of ~200GB with a local connection of 8/2
mbps.
Tool like bacula, amanda can't help me due to low bandwidth in local server.
I'm thinking rsync will be a good choice.
What do you think about?
Thanks in advance.
Hi list,
I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic).
I've tried to search on google about support on C7 but can't fine anything.
There is a way to check if supported?
Is the Realtek 8111GR supported or I must change mobo?
Thanks in advance.
Il 17/01/2016 19:36, Alessandro Baggi ha scritto:
Il 17/01/2016 18:46, Brandon Vincent ha scritto:
On Sun, Jan 17, 2016 at 10:05 AM, Matt Garman
<matthew.gar...@gmail.com> wrote:
I'm not sure what's going on with your drive. But if it were mine,
I'd want
to replace it. If there are
Il 18/01/2016 12:09, Chris Murphy ha scritto:
What is the result for each drive?
smartctl -l scterc
Chris Murphy
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
.
SCT Error Recovery Control command not
Il 17/01/2016 18:46, Brandon Vincent ha scritto:
On Sun, Jan 17, 2016 at 10:05 AM, Matt Garman wrote:
I'm not sure what's going on with your drive. But if it were mine, I'd want
to replace it. If there are issues, that long smart check ought to turn up
something, and
Hi list,
I've a notebook with C7 (1511). This notebook has 2 disk (640 GB) and
I've configured them with MD at level 1. Some days ago I've noticed some
critical slowdown while opening applications.
First of all I've disabled acpi on disks.
I've checked disk for badblocks 4 consecutive times
Hi list,
I'm using C7 and noticed that cpu freq is enabled with governor
conservative. I've used cpupower utils for governor change, but at the
next boot it restart with conservative governor.
I've tried also to start cpupower service and setting OPT in
/etc/sysconfig/cpupower but it does not
Il 07/02/2016 01:11, Miguel Medalha ha scritto:
Try this. I have been thinking of trying it on C7.
http://www.linuxhelp.net/forums/index.php?showtopic=10868
I wouldn't follow the instructions on that link.
Disable iptables? Nah!
The author lumps SELinux and the firewall together.
What is
Il 06/02/2016 14:52, Alessandro Baggi ha scritto:
Il 06/02/2016 12:43, Alessandro Baggi ha scritto:
Hi there,
I want to setup a AD server with C7. Is this supported using samba
release shipped with C7?
I can't found Centos7 related how-to for study this setup.
Can someone point me
Hi there,
I want to setup a AD server with C7. Is this supported using samba
release shipped with C7?
I can't found Centos7 related how-to for study this setup.
Can someone point me in the right direction?
Thanks in advance
___
CentOS mailing list
Il 06/02/2016 12:43, Alessandro Baggi ha scritto:
Hi there,
I want to setup a AD server with C7. Is this supported using samba
release shipped with C7?
I can't found Centos7 related how-to for study this setup.
Can someone point me in the right direction?
Thanks in advance
Reading from
Il 07/02/2016 15:59, Miguel Medalha ha scritto:
How I can assing permission on this share?
You can easily do it by following the instructions on the Samba Wiki:
https://wiki.samba.org/index.php/User_Documentation
Hi Miguel,
I've followed the wiki how to but, I want configure a share on
/2014/11/17/how-to-install-samba4-active-directory-on-centos-7-part-2/
On Sun, Feb 7, 2016 at 11:34 PM, Alessandro Baggi
<alessandro.ba...@gmail.com> wrote:
Il 07/02/2016 17:18, Ben Archuleta ha scritto:
I use these instructions to create a domain controller on CentOS for a
Windows 10 lab
Il 07/02/2016 17:18, Ben Archuleta ha scritto:
I use these instructions to create a domain controller on CentOS for a Windows
10 lab I have:
http://www.unixmen.com/setting-samba-primary-domain-controller-centos-7/
Regards,
Ben
Thanks Ben, but this is for PDC NT not for AD DC. With C7 to
Hi list,
I've a printer model HP ENVY 5530 (AIO) configured in wifi. I've
configured this printer on my C7(1511) workstation using hplip and cups.
Printer is installed e configured. After installation I try to send a
test print page and it is printed. After reboot, I try to print other
doc,
Il 31/01/2016 11:17, Alessandro Baggi ha scritto:
Hi list,
I've a printer model HP ENVY 5530 (AIO) configured in wifi. I've
configured this printer on my C7(1511) workstation using hplip and cups.
Printer is installed e configured. After installation I try to send a
test print page
to
being fine for years. So I believe vibration does sometimes play a
role in mysterious problems that creep up from time to time.
On Mon, Jan 18, 2016 at 5:39 AM, Alessandro Baggi
<alessandro.ba...@gmail.com> wrote:
Il 18/01/2016 12:09, Chris Murphy ha scritto:
What is the result for each
Hi list,
today I've noticed a strange behaviour during system startup. This is a
workstation.
During mounting swap, system waits at least 90 seconds before continue.
When system is loaded swap seems to be not mounted.
Running free -h , it reports for swap 0 total and 0 for other values.
Always
Hi list,
I'm new with UEFI and GPT.
For several years I've used MBR partition table. I've installed my
system on software raid1 (mdadm) using md0(sda1,sdb1) for swap,
md1(sda2, sdb2) for /, md2 (sda3,sdb3) for /home. From several how-to
concerning raid1 installation, I must put each partition
Update.
I've made another test.
I've create md0 of 8GB and and md1 of 20 gb. After sync completed I've
rebooted the machine.
When I select partitioning on the installer I get only MDRAID of 500 GB
and not partitioned size.
Hi list,
I'm new with UEFI and GPT.
For several years I've used
Hi list, I know that there are automatic update with yum-cron but never
tried.
In my experiences I never did automatic backup because if update was broken
my installation will be broken and I wait some time before apply update.
Today seems to be that automatic update are used more than before.
case is dvd-rom. Once disconnected there are no errors.
How I can solve this problem with cd-rom?
THanks in advance
Il 13/03/2016 09:23, Alessandro Baggi ha scritto:
Hi messmer,
seems that anaconda supports partitioned RAID devices. Disk selection
see one mdraid device and permits to create
Hi messmer,
seems that anaconda supports partitioned RAID devices. Disk selection
see one mdraid device and permits to create partition on it.
Il 13/03/2016 01:04, Gordon Messmer ha scritto:
On 03/12/2016 08:22 AM, Alessandro Baggi wrote:
From several how-to concerning raid1 installation, I
Il 09/08/2016 19:15, Valeri Galtsev ha scritto:
On Tue, August 9, 2016 11:51 am, Gordon Messmer wrote:
On 08/08/2016 11:11 PM, Alessandro Baggi wrote:
|78 | backup-fd | 2016-08-08 09:52:57 | B| F | 191,024 |
7,978,295,072 | T |
|79 | backup-fd | 2016-08-08 12:10:31
Hi list,
I'm studying SELinux on my workstation and for this I've enforced.
In a first time selinux was permissive and when switched to enforcing I
had relabel some things.
Due to my "nescience" about selinux and what I must configure, I'm
waiting avc denied for specified services.
Until
Il 05/07/2016 18:46, Gordon Messmer ha scritto:
On 07/05/2016 08:21 AM, Alessandro Baggi wrote:
What are the meaning of rules on pol.te
https://wiki.centos.org/HowTos/SELinux
The CentOS howto has some information, and links to additional resources.
The policy should be pretty easy to read
Hey there,
today I've ridden about HEIST.
Good morning list,
I've a question about backup performed with bacula.
I manage a DELL server (dedicated on provider) with C7. I use bacula as
backup system with volumes on disk. System performs mon-sat incremental
backups and Sun full backup at 03.00 AM. I've another pool (named
update) where
Hi list,
I've added a link for gui_rpc_auth.cfg on my home and I can run manager
from my user.
There are other ways?
Il 22/02/2017 11:56, Alessandro Baggi ha scritto:
Hi list,
I've installed boinc-client and boinc-manager from epel.
After starting boinc-client with systemctl when I try
Hi list,
I've installed boinc-client and boinc-manager from epel.
After starting boinc-client with systemctl when I try to connect from
boincmgr I get "Unable to connect to boinc client".
I've added to unit file --allow_remote_gui_rpc
and on netstat I get:
tcp0 0 0.0.0.0:31416
Il 22/02/2017 14:53, Darr247 ha scritto:
So I don't understand where is the problem.
What I can do to solve this problem?
For starters, you could mention what version of CentOS you're running. :)
___
CentOS mailing list
CentOS@centos.org
Hi list,
I've a problem with vsftpd on C7.3. This is a dedicated server protected
by a Zywall5. SELINUX is disabled.
This is my vsftpd configuration:
anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
dirmessage_enable=YES
xferlog_enable=YES
connect_from_port_20=YES
Hi list,
I've an update:
I've changed listen_port from 21 to 10021 restarted again vsftpd and
problem is solved.
I can't understand whats happened.
Any ideas?
Il 15/02/2017 13:37, Alessandro Baggi ha scritto:
Hi list,
I've a problem with vsftpd on C7.3. This is a dedicated server
Il 24/10/2016 14:05, Leonard den Ottolander ha scritto:
Hi,
On Mon, 2016-10-24 at 12:07 +0200, Alessandro Baggi wrote:
=== START OF READ SMART DATA SECTION ===
SMART Error Log not supported
I reckon there's a between those lines. The line right after the
first should read something like
to serve as nas, he will not work. I have seen this type of
product on lan with 120 hosts with a deadly performances.
Il 28/ott/2016 19:15, "Valeri Galtsev" <galt...@kicp.uchicago.edu> ha
scritto:
>
> On Fri, October 28, 2016 11:50 am, Alessandro Baggi wrote:
> >
On Fri, 28 Oct 2016 18:50, Alessandro Baggi wrote:
>>
>> Il 28/10/2016 16:28, Valeri Galtsev ha scritto:
>>>
>>> On Fri, October 28, 2016 2:42 am, Alessandro Baggi wrote:
>>> > Il 27/10/2016 19:38, Yamaban ha scritto:
>>> > > For m
Il 28/10/2016 16:28, Valeri Galtsev ha scritto:
On Fri, October 28, 2016 2:42 am, Alessandro Baggi wrote:
Il 27/10/2016 19:38, Yamaban ha scritto:
For my personal use I would replace that Drive asap.
- There is no warranty for it anymore (time since buy)
- You can't buy it new anymore
Hi list,
another question about bacula, but this time about restoring backups.
I've a server that I must backup every day. My plan is:
from mon to sat incrimental backup
and on sunday full backup.
When I will perform a restore I must restore from last valid full
backup and then all valid
Il 19/10/2016 13:52, mark ha scritto:
Hi, there,
On 10/19/16 07:20, Alessandro Baggi wrote:
Hi list,
another question about bacula, but this time about restoring backups.
I've a server that I must backup every day. My plan is:
from mon to sat incrimental backup
and on sunday full backup
Il 19/10/2016 23:01, Jon LaBadie ha scritto:
On Wed, Oct 19, 2016 at 01:20:49PM +0200, Alessandro Baggi wrote:
Hi list,
another question about bacula, but this time about restoring backups.
I've a server that I must backup every day. My plan is:
from mon to sat incrimental backup
Hi list,
I've encountered a problem with wol. I'm not new to this but this time I
found unwanted behaviuor.
I'm triyng to wol another c7 machine. When I run ether-wake @mac the
system is started. When I shutdown the system after 3 seconds it start
again and again and again.
To block this
Il 21/10/2016 17:20, m.r...@5-cent.us ha scritto:
John R Pierce wrote:
On 10/21/2016 2:03 AM, Alessandro Baggi wrote:
My ssds are failing?
SSD's wear out based on writes per block. they distribute those
writes, but once each block has been written X number of times, they are
no longer
Hi list,
I've installed C7 1511 (kernel 3.10.x) on a skylake mother board with
i3-6100.
I know about skylake problems.
For the iGPU I've used i915.preliminary_support and ok.
Some days ago, I get different strange error on this machine. When
screensaver starts or when monitor will be in energy
Hi list,
on my workstation I've a md raid (mirror) for / on md1. This raid has 2
ssd as members (each corsair GT force 120GB MLC). This disks are ~ 5
years old.
Today I've checked my ssds smart status and I get:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED
Il 27/10/2016 13:58, Leonard den Ottolander ha scritto:
Hi,
On Thu, 2016-10-27 at 11:25 +0200, Alessandro Baggi wrote:
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
That's the line you are looking for. Since your disk apparently does
Il 27/10/2016 19:38, Yamaban ha scritto:
On Thu, 27 Oct 2016 11:25, Alessandro Baggi wrote:
Il 24/10/2016 14:05, Leonard den Ottolander ha scritto:
On Mon, 2016-10-24 at 12:07 +0200, Alessandro Baggi wrote:
> === START OF READ SMART DATA SECTION ===
> SMART Error Log not support
Il 04/11/2016 15:29, Johnny Hughes ha scritto:
On 11/04/2016 09:15 AM, Mark Haney wrote:
That's all well and good, but how about you actually include the minor
number AND the release date? I.e. 7.3-1104 for CentOS 7.3 released today,
for example. I'm all for the SIGs to keep track of their
Hi list,
I've solved my problem.
I've understood some concepts.
I've defined bacula-sd multiple devices with different Media Type and
configured different storage directives in director.
Thanks.
Hi list,
I'm building a backup server for 3 hosts (1 workstation, 2 server). I
will use bacula
Hi list,
I'm building a backup server for 3 hosts (1 workstation, 2 server). I
will use bacula to perform backups. The backup is performed on disks (2
x 3TB on mdraid mirror) and for each hosts I've created a logical volume
with related size.
This 3 hosts have different data size with
to find the building burnt
out and collapsed. Now work out how to rebuild your system on new kit
on another site and you'll find that you define your backup needs.
Regards,
Martin
On 12/10/16 12:54, Alessandro Baggi wrote:
Hi list,
I'm building a backup server for 3 hosts (1 workstation, 2 server
Il 12/12/2016 17:15, pope...@chmail.ir ha scritto:
i have 6 sata hdd 2 TB . i want install centos 7 on these hdd in raid 6 mode.
how can i do it ?
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
If you
Hi list,
this morning I've update my centos to 1611.
Running virt-manager, and trying to open virt-viewer by clicking on
"Open", I get this error:
Errore nell'avvio dell'installazione: 'nome-mv'
This bug is reported on rh bugzilla (for Fedora 24) and closed
2016-07-02 11:24:51 EDT
This
Hi list,
I have a dedicated server managed through ssh and this morning I have
upgraded my system from 7.2 to 7.3. After yum finished his work, and
rebooted my server.
After reboot I tried to log in with ssh and got "Connection refused".
I've noticed that all public services were online.
So
Hi list,
Some days ago I updated my centos 7.3 to 7.4 on a dell server. After this
update I noticed a strange behaviour by sshd. I noticed this problem
because trying to connect to ssh I got connection refused or high latency
between connecting and password req.
So I noticed that sshd will be
directive in sshd.service
to solve the problem. Updating from 7.3 to 7.4 I think that 2 files for
sshd caused some conflict that kill my sshd. Removing the first file
problem is solved.
Thanks to all.
Il 06 Nov 2017 9:03 PM, "Alessandro Baggi" <alessandro.ba...@gmail.com> ha
scritto:
Hi
Pearson ha
scritto:
> Alessandro Baggi:
> >
> > I found this https://access.redhat.com/solutions/3438891 but I've not
> > access to this content. In this content seems that the workaround is
> > using lightdm and mask gdm.
>
> That page is not exactly helpful ... v
1 - 100 of 238 matches
Mail list logo