Hi Dave,
On Aug 11, 2013, at 23:52 , Dave Taht dave.t...@gmail.com wrote:
On Sun, Aug 11, 2013 at 1:25 PM, Sebastian Moeller moell...@gmx.de wrote:
Hi Dave,
I see that 3.10.5-1 is out.
I'm just keeping up with the patches and the openwrt tree. Stephen
walker also dropped in a huge
Hi Dave,
I see that 3.10.5-1 is out.
On Jul 26, 2013, at 07:20 , Dave Taht dave.t...@gmail.com wrote:
sysupgrade -n doesn't work with this release. Stay away. I have a new
build of 3.10.3-1 and am trying to fix it…
Does sys upgrade -n work for this release?
best
Sebastian
Hi Fred,
On Aug 8, 2013, at 01:21 , Fred Stratton fredstrat...@imap.cc wrote:
On 7 Aug 2013, at 14:38, Sebastian Moeller moell...@gmx.de wrote:
Hi Fred,
this got a bit longish so I took the liberty to reduce the quoted text a bit
On Aug 5, 2013, at 12:47 , Fred Stratton
(sent initially to incorrect address)
Begin forwarded message:
From: Fred Stratton fredstrat...@imap.cc
Subject: Re: [Cerowrt-devel] cerowrt-3.10.2-1 dev release + owamp
Date: 5 August 2013 11:45:33 BST
To: Sebastian Moeller moell...@gmx.de
On 5 Aug 2013, at 10:44, Sebastian Moeller
I cannot currently access the gateway device.
AFAIK, Cerowrt does not allow setting up a masquerade, and it is physically
difficult to access. I wish I could have a masquerade. The device has a fixed
IP address of 192.168.1.254.
The target snr is set high, so the device does not retrain for
On 3 Aug 2013, at 11:36, Fred Stratton fredstrat...@imap.cc wrote:
Cerowrt should at some point allow the ADSL user to surf the web and download
at the same time.
Correction.
Allow the user to consistently stream video without stuttering,, even using the
dreadful flash based iPlayer, and
Thank you for the reply. I shall pursue your suggestions
morgens.
On 3 Aug 2013, at 21:53, Sebastian Moeller moell...@gmx.de wrote:
Hi Fread,
On Aug 3, 2013, at 12:36 , Fred Stratton fredstrat...@imap.cc wrote:
I cannot currently access the gateway device.
AFAIK, Cerowrt does not
I have spent the time since last posting reinstalling, and retesting, the build.
6in4 works. As ever, the firewall configuration as reimported from backup
blocks ipv6 function, even though the rules appear correct. I worked around
this by only reimporting the configuration files needed.
I
Hi Fred,
On Jul 31, 2013, at 21:50 , Fred Stratton fredstrat...@imap.cc wrote:
I have spent the time since last posting reinstalling, and retesting, the
build.
6in4 works. As ever, the firewall configuration as reimported from backup
blocks ipv6 function, even though the rules appear
tc -s -d class show dev ge00
class htb 1:10 parent 1:1 leaf 110: prio 0 quantum 1500 rate 70bit ceil
70bit burst 1599b/1 mpu 0b overhead 0b cburst 1599b/1 mpu 0b overhead 0b
level 0
Sent 15809014 bytes 115190 pkt (dropped 4733, overlimits 0 requeues 0)
rate 3616bit 3pps backlog 0b
On 31 Jul 2013, at 23:14, Sebastian Moeller moell...@gmx.de wrote:
Hi Fred,
thanks a lot.
On Jul 31, 2013, at 23:37 , Fred Stratton fredstrat...@imap.cc wrote:
tc -s -d class show dev ge00
class htb 1:10 parent 1:1 leaf 110: prio 0 quantum 1500 rate 70bit ceil
70bit
I can certainly confirm this, having spent several fruitless hours with the
build.
6in4 remains broken for henet.
dnsmasq appears not to recognise additional domain name servers. The ISP I use
has a very slow domain name service, to which the system now defaults. The
consequence of this is
Hi Fred, hi List
On Jul 26, 2013, at 08:21 , Fred Stratton fredstrat...@imap.cc wrote:
I can certainly confirm this, having spent several fruitless hours with the
build.
6in4 remains broken for henet.
dnsmasq appears not to recognise additional domain name servers. The ISP I
use has a
HEnet has been working consistently for me.
In /etc/config/network make sure that se00, sw00, sw10, gw00, gw10, gw01,
and gw11 all have the following line:
option ip6assign64
And add the following using your information to replace the '###' fields,
also remove any earlier
Thank you, Sebastian and David.
Sebastian
I was unaware of the problem with functions.sh
I use polipo.
I shall try your stab approach again. I have a bridged connection, rather than
using PPPoE, but can adapt. I suspect all European telcos use ADSL2+ over ATM.
David
I am encouraged that it
sysupgrade -n doesn't work with this release. Stay away. I have a new
build of 3.10.3-1 and am trying to fix it...
I did find the problem on the ubnt builds - I'd switched to the new
babeld from quagga, but failed to install it by default.
in openwrt trunk, elliptic curve has been enabled in
16 matches
Mail list logo
