I'm a little confused tho' - the first meeting is sending
mixed messages.
Is it virtual, online or both? It says virtual but then
gives a physical
address.
Hi Jim,
I see you've added a photo. I've bumped into many times before, but never
put the face with the name. Good to meet you.
' CF user group (started by
Steven Erat)
to replace the now ?defunct? BCFUG. Right now there are only a few
members, so I am trying to help get the word out. First
meeting is on
February 7th!
Check it out, sign yourself up!
http://coldfusion.meetup.com/17/
Ray
Thanks for letting me know. I updated the blog to read more clearly.
As one of the founding members you're certainly welcome to promote the
group as you wish!
Apparently the Meetup.com Boston CF group was founded in 2003 and also went
defunct. So this is actually more of a revival than a
action occuring.
Also, turn on Log slow pages and monitor server.log for entries of slow
pages. This doesn't give you the detail that a stack trace in a thread dump
does, but its a quick summary of the parent page that runs slow.
-Steven Erat
-Original Message-
From: Jon Block [mailto
I also noticed that even after it came back up, the service
only held up for
so long before it became unresponsive again. I am not having
this problem
with apache 1.3.33.
I'm tellin' ya, you gotta log slow pages and take thread dumps.
1) Take 2 thread dumps when the server is hung up,
as possible, 1
min. ColdFusion can schedule the stop/start, but Windows will execute the
commands even if CF is shutdown.
See this for a cfm script that calls AT to restart the service:
http://www.talkingtree.com/blog/index.cfm?mode=aliasalias=RestartCFMX
-Steven Erat
-Original Message
When doing this, do you connect? (the cmd window goes blank and you get a
blinking cursor)
If you can't connect then neither can wsconfig.
You might want to confirm that the TrueVector service is turned off (the
service under ZoneAlarm).
Let us know ...
-Steven Erat
-Original Message
Could it be that you are using MySQL 4.1?
http://www.talkingtree.com/blog/index.cfm?mode=aliasalias=MySQL41
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=6ef0253
I've been able to setup a MySQL for CF5 BD, but CFMX throws
the following
error:
Connection verification
Scott,
The CFMX 6.1 Updater 1 comes with Macromedia drivers version 3.3. These
drivers have been demonstrated by CF QA to be superior to earlier versions,
including those that were in CFMX 6.1 and especially those that came with
6.0x.
Macromedia CF QA recommends using the 3.3 driver version.
. Try installing them from the CD/DVD out of the SRPMS directory.
Steven Erat
~|
Special thanks to the CF Community Suite Silver Sponsor - CFDynamics
http://www.cfdynamics.com
Message: http://www.houseoffusion.com/lists.cfm/link=i:4
:32 info Server version: Apache/2.0.52
12/03 16:12:32 info Restarted Apache server
-Steven Erat
Although Fedora Core 3 is not an officially supported OS for
CFMX, I currently use FC3 with CFMX 6.1 and Apache 20.52 on
my laptop. I use the default user account, nobody. I can
test some
Micha,
I reiterate; I don't believe that casting a broad net for specious reports,
incomplete data, and hyperbole will serve to solve whatever particular
difficulty ails a given server. I think most every case is rather unique,
although where common threads are drawn they get turned around into
Ben,
That said, what I take out of this is that, to develop
applications for the
ColdFusion MX platform, we developers need a very thorough
understanding of
the JVM. This includes how to debug JVM related issues and
where to go to
locate information about JVM error messages.
Not
it.
-Steven Erat
Macromedia ColdFusion Support
~|
Special thanks to the CF Community Suite Gold Sponsor - CFHosting.net
http://www.cfhosting.net
Message: http://www.houseoffusion.com/lists.cfm/link=i:4:185267
Archives: http
(Message Rejected: Reposting)Dave, Here's a few replies to your followup.
If I don't make sense, blame it on NYPD Blue :)
JRun metrics provide a simple view into the number of sessions and the
amount of memory allocated and free, and you might want to use this before
deciding to enable the more
This is a scheduled task. Actually, since scheduled tasks execute the
target task cfm template by way of an intermediate CF request that does a
CFHTTP call, its actually the intermediate that ran XX seconds, not the
final task target cfm when it appears as an unnamed entry.
I think the final
Martin,
My blog entry actually recommends using the -Xint JVM argument to disable
the Sun JVM HotSpot runtime optimizer.It doesn't recommend using a
different JVM.
Anyway, the problem you're running into is because while you changed the
jvm.config JVM, you probably left the -server switch in
I think I got them all.In case this message is truncated, note the START
and END delimiters of my email.
START
// English translation by Steven Erat
// USEFUL TRANSLATIONS
// cargar = to load / cargando = loading
// contenido = content
You might want to take a look at the CodeWeavers website.Dreamweaver MX is
offered at the Bronze compatibility level for Linux.
http://www.codeweavers.com/site/compatibility/browse/name?app_id=14
http://www.codeweavers.com/site/compatibility/browse/name?app_id=14
You could also google for:
You have to recompile the connector to eliminate that error.The connector
source is included in the ColdFusion installation.
>From a (slightly old) CFMX Connector FAQ:
Where is the Apache connector source located and how can I compile my own
Apache EAPI connector?
For ColdFusion MX, the code
For anyone trying to get to that link, it seems that the server is down
completely right now... have to talk to my ISP about that.
The problem is that if compression is enabled for applications and/or static
content in IIS, Java clients can't decompress the content, including the
ColdFusion
Based on the AxisFaultCode, I believe that the actual character you want to
replace is represented by the entity x1c;
Assuming that in CF the variable xmlcontent holds the xml document, then the
following would strip that character out:
cfset xmlcontent = replace(xmlcontent,chr(28),'','all')
http://www.macromedia.com/support/coldfusion/adv_development/config_builtin
_webserver/index.html
-Steven Erat
_
From: Burns, John D [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 11, 2004 9:50 AM
To: CF-Talk
Subject: Datasource list in XML file?
Ok, related to my earlier dev server
Hrm...
- Check the jrun.xml file to confirm that the port is in fact 8500.
- Check the default-event.log for server startup. It should have an entry
like:
08/10 16:40:43 info JRun Web Server listening on *:8500
- Check that the port is actively being listened on with netstat.
C:\netstat -a |
CFMX 6.1 supports Red Hat Enterprise Linux 2.1 and 3.0, and it comes with a
MS SQL JDBC driver.For those versions of Linux which have been previously
qualified as not supported for Verity functionality, there is a hotfix to
enable Verity for ColdFusion on all Linux OS's listed in the system
Generate a Full Thread Dump to see which threads and cfm templates are
running at that instant.
http://www.macromedia.com/support/coldfusion/ts/documents/tn18339.htm
http://www.macromedia.com/support/coldfusion/ts/documents/tn18339.htm
-Steve
_
From: Mark W. Breneman [mailto:[EMAIL
to include getting verity spider to work?
Doug
Steven Erat wrote:
CFMX 6.1 supports Red Hat Enterprise Linux 2.1 and 3.0, and it comes with a
MS SQL JDBC driver.For those versions of Linux which have been previously
qualified as not supported for Verity functionality, there is a hotfix to
enable
-Talk
Subject: Re: CF on Linux
My problem is that it does not exist on our installation. I would like
to try to use vspider but I cannot find it.
Doug
Steven Erat wrote:
Support for Verity is inclusive of the Verity commandline tools.
Do you have a specific example of a vspider problem on Linux
.
-Steven Erat
_
From: DURETTE, STEVEN J (AIT) [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 29, 2004 4:36 PM
To: CF-Talk
Subject: RE: Monitor CFMX threads
Pete,
I tried the new code.When I browse it with IE6 sp1 I get the error.If I
use the browse in Homesite+ 5.5 I get Thread Count: 3
Just
string.Leaving the SP out parameter as
clob but changing the CF_SQL_TYPE to varchar resolved the problem as the
clob was returned as a string.
My testing for these issues was done with CFMX 6.1, Macromedia driver
version 3.3, Oracle 8.1.7.
Hopefully, some of this may help.
Steven Erat
The IIS virtual path for JRunScripts is needed for the JRun ISAPI filter.
If JRun ISAPI filter makes a match, it uses /JRunScripts/jrun.dll
For example, if the jrun.ini parameter for ignoresuffixmap is set to false,
then if J2EE sessions are used and jsessionid is in the URL, the JRun ISAPI
pasted the same URL with JSESSIONID and I was
able to share the same session from another machine.To me, this
demonstrates that the J2EE Session can be shared between multiple HTTP
clients on multiple locations, and this should hold true whether the client
is an applet or a browser.
HTH,
Steven Erat
My reply was bounced from CFTalk because it was too long, even though I
truncated the previous messages.I've reposted a reply on my blog here:
http://www.talkingtree.com/blog/index.cfm?data="">
http://www.talkingtree.com/blog/index.cfm?data=""
_
From: M Lane [mailto:[EMAIL PROTECTED]
Sent:
oldFusion to see if you get the same error message or
not.
If this is a custom collection built from a query then my tag won't help.
Its only for file based collections.
HTH,
Steven Erat
_
From: Doug James [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 29, 2004 1:16 PM
To: CF-Talk
Sub
Brook,
You could generate a thread dump shortly after starting or some other point
in time.A thread dump will show all the ColdFusion requests that came in
via the webserver connector, shown as having a prefix of jrpp-xx.
http://www.macromedia.com/support/coldfusion/ts/documents/tn18339.htm
Everyone can stop rubbing their eyes now...
Michael's email parser stripped out the example included at the end of my
previous message.
But you get the point.
_
From: Steven Erat [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 29, 2004 4:31 PM
To: CF-Talk
Subject: RE: Debugging CFMX
Brook
to
this special page in order to view the serialized session data, and then the
applet could replicate the session data internally on the client each time.
-Steven Erat
_
From: Dr ML [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 29, 2004 9:13 PM
To: CF-Talk
Subject: J2EE SessionID with CFMX6.1
://www.petefreitag.com/articles/gctuning/
http://www.petefreitag.com/articles/gctuning/
-Steven Erat
_
From: Brook Davies [mailto:[EMAIL PROTECTED]
Sent: Monday, June 28, 2004 4:16 PM
To: CF-Talk
Subject: CFMX java.lang.OutOfMemoryError
I have posted my log file (just todays pertinent bit) to
http
/articles/article.asp?p=27389seqNum=9 seqNum=9
-Steven Erat
_
From: Claude Schneegans [mailto:[EMAIL PROTECTED]
Sent: Monday, June 28, 2004 4:17 PM
To: CF-Talk
Subject: Using DNS-Less connections
Hi,
Since CF 5, it is possible to CFQUERY directly DNS-Less databases using
dbtype=DYNAMIC
For
In CFMX 6.0, the Permanent Generation size was not modulated by a jvm arg,
and so the jvm default was used, 64MB.
In CFMX 6.1, the maxpermsize jvm argument was explicitly set to 128MB in
jvm.config: -XX:MaxPermSize=128m
The problem was reported primarily by those using CFMX 6.0, and has
:+PrintGCTimeStamps -XX:+PrintHeapAtGC -Xloggc:gc_out.log
See also:
http://www.ferdia.org/blog/index.cfm?data="">
http://www.ferdia.org/blog/index.cfm?data=""
-Steven Erat
_
From: Brook Davies [mailto:[EMAIL PROTECTED]
Sent: Monday, June 28, 2004 5:23 PM
To: CF
Using _javascript_, this example will rotate the three gifs at 1 second
intervals:
SCRIPT LANGUAGE=_javascript_ TYPE=TEXT/_javascript_
var adImages = new Array(image01.gif,image02.gif,image03.gif)
var thisAd = 0
function cycle() {
if (document.images) {
if (document.adBanner.complete) {
Check out this posting for a Java CFX custom CAPTCHA solution from Ryan
Emerle:
http://www.emerle.net/comments/view.cfm/p/152
-Original Message-
From: Whittingham, P [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 16, 2004 3:55 PM
To: CF-Talk
Subject: cfmx and CAPTCHA
Hi All,
Passing along some quoted information from another source that might be
helpful...
I think some ofthe confusion about encoding is because it is not always
clear that there are two separate conversions which happen when CFMX
processes a template:
* conversion #1 -The template file is read and
Passing along some quoted information from another source that might be
helpful...
I think some ofthe confusion about encoding is because it is not always
clear that there are two separate conversions which happen when CFMX
processes a template:
* conversion #1 -The template file is read and
anyone have an experience to the contrary when officially logging a support
ticket, then I invite you to contact me so that I can help rectify the
situation and perhaps even assist in providing the technical support myself.
-Steven Erat
Macromedia Server Product Support
[Todays Threads]
[This Message
To imply that a ColdFusion user would be getting inferior level of
support
from the Macromedia ColdFusion support staff is to make an uninformed
remark.
I certainly wasn't trying to imply that, so hopefully no one thought I
did. I was simply making the statement that you are more likely
I've set up FIrebirdSQL with CFMX using the Jaybird JDBC driver, but haven't
done too much with it beyond a few queries.However, I have worked with a
few people that use it reguarly with CFMX.
About a year ago there was a bug in the driver where it would hang on
inserts/updates, so we reported it
To reinstall RDS, edit {cfroot}\lib\adminconfig.xml, change
runsetupwizardfalse/runsetupwizard to true, then run the CFAdmin to
complete the migration wizard again.
To disable/enable RDS, see this
http://livedocs.macromedia.com/coldfusion/6.1/htmldocs/config22.htm
This technote describes the ports that ColdFusion MX uses:
http://www.macromedia.com/support/coldfusion/ts/documents/tn18336.htm
http://www.macromedia.com/support/coldfusion/ts/documents/tn18336.htm
The default proxy port is 51010, but you must have a server instance where
JRPP must be set to
Glad the connector issue worked out for you.As far as the 404s, I can't
say I've seen that much.Maybe you could enable connector logging inside
the JRun directive in httpd.conf.Then trace the requests just enough until
you get a 404 like this before turning off logging.The connector logging
is
Is anything else listening on port 2901?
Is the firewall blocking connections to that port?You might want to test
this by running lokkit, temporarily setting firewall to disabled, then start
CF again.
-Original Message-
From: Tim Blair [mailto:[EMAIL PROTECTED]
This morning I had need
Just remembered one other thing to check,j make sure that there are no
misconfigurations regarding host information in /etc/hosts and
/etc/sysconfig/network.
-Original Message-
From: Steven Erat [mailto:[EMAIL PROTECTED]
Sent: Friday, April 23, 2004 9:16 AM
To: CF-Talk
Subject: RE
I've seen two cases resolved where this problem occurred, security was ok,
the user could telnet to the port and connect.Those two were resolved by
finding misconfigurations in one of the two host config files (/etc/hosts/,
/etc/sysconfig/network).
-Original Message-
From: Tim Blair
in this Tech Note.
-Steven Erat
[Todays Threads]
[This Message]
[Subscription]
[Fast Unsubscribe]
[User Settings]
/mx/coldfusion/articles/migrating.html
ColdFusion MX Migration Center
http://macromedia.com/devnet/mx/coldfusion/migrating.html
-Steven Erat
From: Robert Shaw [mailto:[EMAIL PROTECTED]
Hi,
I am going to upgrade some of our CF 5 machines and we have a few
questions
we thought the CF gurus
The deployment of .car files built in CF5 to CFMX is not supported.
-Steven Erat
-Original Message-
From: [EMAIL PROTECTED] [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 17, 2004 1:33 PM
To: CF-Talk
Subject: Archive CF5 - Deploy CFMX?
I know I've done
to create or modify packages on
the db?
- Are you continuing to use createdefaultpackage=true after the initial
configuration?
Thanks
Steven Erat
_
From: Ian Vaughan [mailto:[EMAIL PROTECTED]
Sent: Friday, February 27, 2004 9:25 AM
To: CF-Talk
Subject: RE: Question regarding CFMX 6.2
FirebirdSQL works with CFMX.You must download their JDBC driver, add it to
the classpath in the CFAdmin Java/JVM page, and then configure it as OTHER
in the CFAdmin Datasource page.
Last year there was a bug uncovered in the Jaybird driver for FirebirdSQL
regarding inserts and updates, but the
It's documented that the Verity functionality is not supported in Red Hat
7.3, 8, and 9 in any version of CFMX 6.0 or 6.1.Unfortunately, this means
you will have to consider alternatives such as Lucene for indexing
documents.Aaron Johnson wrote two excellent articles on integrating Lucene
with
You can wrap your CFQUERY tags individually with a CFTRANSACTION and then
set the transaction isolation level to read_uncommitted.That will have the
desired effect.
In CFMX 6.0 datasource information used to be kept, partially, in
jrun-resources.xml. Datasources had a control element for
Ah.I thought that an isolation level of read uncommitted was the goal.
At any rate, I don't believe this can be configured via an xml setting.I
had tried various attempts to do that, but was unsuccessful.
_
From: Dave Watts [mailto:[EMAIL PROTECTED]
Sent: Friday, January 30, 2004 7:39 PM
Try using getMetricData() from your code.This provides the same data that
cfstat does. Parse it, format it, output it to a file.Run the code as a
scheduled task at the desired interval.
Usage is the same in CFMX as it is in CF5/4.5.
That's true.However, because it's a known value that remains constant with
each execution, it can be easily accounted for when calculating summarized
data.There will one request for the template having getMetricData( ).In
fact, you could simply do (ReqsRunning = ReqsRunning -1) before logging the
Maybe this will help:
Troubleshooting DataDirect SequeLink ODBC service startup issues
http://www.macromedia.com/support/coldfusion/ts/documents/cfmx_sequelink.htm
http://www.macromedia.com/support/coldfusion/ts/documents/cfmx_sequelink.ht
m
_
From: Bruce Sorge [mailto:[EMAIL PROTECTED]
MySQL has default security restrictions that typically don't allow remote
hosts to connect.A quick and dirty test would be to modify the mysql start
script and add an argument for --skip-grant-tables such as:
$bindir/safe_mysqld --skip-grant-tables --datadir=$datadir . . .Then
restart mysqld.
If
CFXML_Blog 1.5 Beta 3 uses this editor via a custom tag.The source shows
the author to be: John Watson ([EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] )
_
From: Dwayne Cole [mailto:[EMAIL PROTECTED]
Sent: Monday, January 05, 2004 3:55 PM
To: CF-Talk
Subject: Re:FCKeditor - who uses it ?
Is
This is bug 48509 and is not fixed as of the current version.It occurs when sandbox security is enabled.
-Original Message-
From: Tyler Silcox [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 12, 2003 2:20 PM
To: CF-Talk
Subject: RE: Outputting an XML Object to browser
Dave said: I'd
Make sure there are no characters after the cfcontent other than the
generated xml.This means no spaces or line breaks between cfcontent and
cfoutput.
Looks like you may have a space, but it might be the cftalk html formatting.
-Original Message-
From: Jeff Beer [mailto:[EMAIL PROTECTED]
Looking at this again,
This works and outputs the xmldoc as a string
-
CFSETTING showdebugoutput=No
CFSAVECONTENT variable=xmlDoc
rootfoobar/foo/root
/CFSAVECONTENT
CFCONTENT type=text/xml reset=Yes
CFOUTPUT#xmlDoc#/CFOUTPUT
This breaks while trying to output the xml object
the cfdirectory tag as measured with getTickCount(), but CF5 on the same machine with same code and same directory required 154 seconds.I ran the test several times and found the times were mostly consistent within about 1 sec.
-Steven Erat
[Todays Threads]
[This Message]
[Subscription]
[Fast
on RH 7.2.
---
sh-2.04$ pwd
/tmp/dirlist
sh-2.04$ time ls -l /dev/null
real 1m16.403s
user 0m1.060s
sys1m13.330s
--
-Original Message-
From: Steven Erat [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 21, 2003 6:03 PM
To: CF-Talk
Subject: RE: cfdirectory = slow
I would still like
this is all I have time for at this moment.Hope this helps.
Steven Erat
-Original Message-
From: [EMAIL PROTECTED] [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2003 9:12 AM
To: CF-Talk
Subject: WebSphere (HATS) and CFMX / J2EE questions
Hi,
I've just successfully
According to the article below, WDDX was introduced in CF4.01.
ColdFusion Language History
http://www.macromedia.com/support/coldfusion/ts/documents/cfmlhistory.htm http://www.macromedia.com/support/coldfusion/ts/documents/cfmlhistory.htm
-Original Message-
From: Nick Baker
If anyone is in Boston on Wednesday, Dec 13, the CEO of Zope Corporation will be presenting an overview of Zope at the Boston Linux and Unix Group at MIT.
http://www.blu.org/cgi-bin/calendar/2003-dec http://www.blu.org/cgi-bin/calendar/2003-dec
-Original Message-
From: Glen Salisbury
.htm
HTH,
Steven Erat
-Original Message-
From: Ian Skinner [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 08, 2003 11:51 AM
To: CF-Talk
Subject: HELP!!! How do I debug server hogging code.
I've got some code that recently started hanging and tying up the server
when it is run.It
,
Steven Erat
-Original Message-
From: Ray Bujarski [mailto:[EMAIL PROTECTED]
Sent: Friday, October 03, 2003 1:36 PM
To: CF-Talk
Subject: RE: RE: Server Slowness
No errors, nothing I can see.No timeouts, nothing like that.Any
suggestions of what pointers I can look for, because I don't
Text before a link
More text here
http://www.macromedia.com/support/coldfusion/ ;http://www.macromedia.com/support/coldfusion/
Text after a link
and here
[Todays Threads]
[This Message]
[Subscription]
[Fast Unsubscribe]
[User Settings]
This is release noted as fixed in 6.1 as bug 48538.
Attempting to verify a bad data source within the Administrator would cause the
Administrator to hang.
-Original Message-
From: Dave Carabetta [mailto:[EMAIL PROTECTED]
Sent: Monday, August 25, 2003 12:07 PM
To: CF-Talk
Subject:
pass an argument string to the arguments
attribute, CF parses the string to create an array for you.
Is this CFMX, CFMX 6.1, or CF5?
-Steven Erat
-Original Message-
From: Jillian Carroll [mailto:[EMAIL PROTECTED]
Sent: Friday, August 22, 2003 4:30 PM
To: CF-Talk
Subject: cfexecute
I was suggesting using an array of arguments because there is a remote possibility
that CF did not parse the argument string properly. As I mentioned before, CF parses
the string into tokens using spaces and quotes as delimiters. I believe there is an
issue in CFMX right now where a quoted
cover, please let me know.
Steven Erat
-Original Message-
From: Calvin Ward [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 21, 2003 5:31 AM
To: CF-Talk
Subject: DevNet Pro watermark
Has anyone else had issues with the DevNet Pro CFMX 6.1 watermark breaking things like
javascript
://www.macromedia.com/support/coldfusion/ts/documents/tn18338.htm
-Steven Erat
-Original Message-
From: Tom Jones [mailto:[EMAIL PROTECTED]
Sent: Friday, August 08, 2003 5:20 PM
To: CF-Talk
Subject: postgresql.cfm not found in MX 6.1
I've now run into a problem with a fresh install of MX 6.1 (RH 9
does not support Verity on: RedHat 7.3, 8, 9; Suse 7.3,
8.x; or TurboLinux 8.
You may want to consider indexing options such as Lucene. The July 2003 CFDJ has an
article on using Lucene with CF, by Aaron Johnson of Mindseye.
-Steven Erat
-Original Message-
From: Doug James [mailto
Is this what you are looking for?
http://livedocs.macromedia.com/coldfusion/6.1/htmldocs/intro8.htm
-Original Message-
From: Jamie Jackson [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 11:14 AM
To: CF-Talk
Subject: Red Sky Upgrade for CFMX/J2EE?
The documentation's
Have you modified the rds.properties file to confirm that the context root for CFMX is
set correctly?
contextRoot={your_context_root_here}
-Original Message-
From: Stacy Young [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 2:58 PM
To: CF-Talk
Subject: FCan not connect to
Message-
From: Stacy Young [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 8:54 PM
To: CF-Talk
Subject: RE: Changing default cfmx server in Jrun
Thanks for the heads up!
Stace
-Original Message-
From: Steven Erat [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 8
there is an app just for HR and
another one just for Marketing. Then deploy the ColdFusion (ear/war your preference)
to each.
HTH,
Steven Erat
-Original Message-
From: Stacy Young [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 7:37 PM
To: CF-Talk
Subject: Changing default
Christian Cantrell posted a solution in his blog back in January:
http://www.markme.com/cantrell/archives/002237.cfm
HTH
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 5:49 PM
To: CF-Talk
Subject: File Upload
I know I've used
I should know this, but I've never had a need for it until now. How do
you force a page refresh every 5 minutes?
Off the top of my head, you could do it in html with:
meta http-equiv=refresh content=300; URL=thispage.cfm /
You can also use a javascript timer and location.href =
I believe that the HTTP 1.1 specification recommends, but does not require, that the
url, cookie, and form posts be URL encoded. ColdFusion 4.5.x did not conform to the
recommendations, but ColdFusion 5.0 does. Check the content-type header on the HTTP
Request, I believe its
So is anyone from the list planning to attend CFUN? (Or will I be the only one in
the hotel bar?)
Yep. Will be there Friday thru Sunday.
-Steven Erat
ColdFusion Support
Macromedia
~|
Archives: http://www.houseoffusion.com
I've logged and worked bug 51012 for CFMX's CFLDAP tag and MS SiteServer 3. The
problem was that a CFLDAP connection to SiteServer would hang. A network trace of the
events showed that CFMX sent an appropriate bind request, but SiteServer failed to
respond. I reproduced the problem outside
://www.macromedia.com/support/coldfusion/ts/documents/tn18339.htm
-Steven Erat
Macromedia
~|
Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4
Subscription:
http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid
the ColdFusion MX on Linux
Technote, renamed to:
ColdFusion MX support on Linux and Unix with Apache
http://www.macromedia.com/support/coldfusion/ts/documents/tn18340.htm
http://www.macromedia.com/support/coldfusion/ts/documents/tn18340.htm
Thank you,
Steven Erat
Macromedia
Michael, can I offer any help with the dll problem? If so, please provide details.
Thanks
Steven Erat
~|
Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4
Subscription:
http://www.houseoffusion.com/cf_lists
CFMX Updater 3 Released March 20, 2003
http://www.macromedia.com/software/coldfusion/special/updater/faq/
CFMX Updater3 Release Notes
http://www.macromedia.com/support/coldfusion/releasenotes/mx/releasenotes_mx_updater.html
~|
Hello,
This is very likely the issue classified as bug 49453. The symptom
java.lang.NumberFormatException: null has been characteristic of this problem.
Please check the size of C:\CfusionMX\lib\client.properties. If it is only 0 bytes,
then you are experiencing the issue. This is a very
Mark,
Please contact me at [EMAIL PROTECTED] regarding this issue.
Thanks
Steven Erat
Macromedia Product Support
~|
Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4
Subscription:
http
While you may or may not be on Linux, I think that if you check out this article that
some parts of it may be useful for you regardless of your OS.
http://www.macromedia.com/v1/handlers/index.cfm?ID=23524Method=FullPageCall=/support/index.cfm
Specifically, this part:
Hotspot crash or
101 - 200 of 207 matches
Mail list logo
