[cfaussie] coldfusion 10 not working with IIS7 url_rewrite
Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
have you applied the 10.0.1 hotfix? On Mon, Sep 10, 2012 at 4:40 PM, Steve Onnis st...@cfcentral.com.au wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- Zac Spitzer Solution Architect / Director Ennoble Consultancy Australia +61 405 847 168 -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
It is working on CF9. No issues there. The issues is with CF10 -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:46 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
As i mentioned I took CF9 IIS6 to IIS7 CF10 without issue. Paul. On 10/09/2012 4:52 PM, Steve Onnis wrote: It is working on CF9. No issues there. The issues is with CF10 -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:46 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
Yes the hotfix has been applied -Original Message- From: Zac Spitzer [mailto:zac.spit...@gmail.com] Sent: Monday, 10 September 2012 4:48 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite have you applied the 10.0.1 hotfix? On Mon, Sep 10, 2012 at 4:40 PM, Steve Onnis st...@cfcentral.com.au wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- Zac Spitzer Solution Architect / Director Ennoble Consultancy Australia +61 405 847 168 -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
When you say they would not load till I reconnected the site to coldfusion what do you mean? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:56 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite As i mentioned I took CF9 IIS6 to IIS7 CF10 without issue. Paul. On 10/09/2012 4:52 PM, Steve Onnis wrote: It is working on CF9. No issues there. The issues is with CF10 -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:46 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
For some reason on the upgrade the default document stopped working. Even though in IIS on the top level and on the site level it was listed it just would not work. WHat I had to do was use the cf connector tool to un connect CF then re connect cf. I'm not really sure what went wrong but that seamed to fix it. Just thought it would be worth a shot. Paul. On 10/09/2012 5:04 PM, Steve Onnis wrote: When you say they would not load till I reconnected the site to coldfusion what do you mean? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:56 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite As i mentioned I took CF9 IIS6 to IIS7 CF10 without issue. Paul. On 10/09/2012 4:52 PM, Steve Onnis wrote: It is working on CF9. No issues there. The issues is with CF10 -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:46 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
Tried that and still nothing. I did notice that the path_info variable is still empty. Wasn't the update meant to correct that? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 5:07 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite For some reason on the upgrade the default document stopped working. Even though in IIS on the top level and on the site level it was listed it just would not work. WHat I had to do was use the cf connector tool to un connect CF then re connect cf. I'm not really sure what went wrong but that seamed to fix it. Just thought it would be worth a shot. Paul. On 10/09/2012 5:04 PM, Steve Onnis wrote: When you say they would not load till I reconnected the site to coldfusion what do you mean? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:56 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite As i mentioned I took CF9 IIS6 to IIS7 CF10 without issue. Paul. On 10/09/2012 4:52 PM, Steve Onnis wrote: It is working on CF9. No issues there. The issues is with CF10 -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:46 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
it is a pretty basic rewrite. rewrite rules clear / rule name=append .cfm enabled=true stopProcessing=true match url=^(.+) / conditions logicalGrouping=MatchAll trackAllCaptures=false add input={REQUEST_FILENAME} pattern=.cfm negate=true / add input={REQUEST_FILENAME} matchType=IsDirectory negate=true / add input={REQUEST_FILENAME} matchType=IsFile negate=true / /conditions action type=Rewrite url={R:0}/index.cfm logRewrittenUrl=true / /rule /rules /rewrite all it does it make /some-folder/ info /some-folder/index.cfm The logging is showing this REWRITE_ACTION Substitution={R:0}index.cfm, RewriteURL=/library/plant-industry/index.cfm, AppendQueryString=true, LogRewrittenURL=true RULE_EVALUATION_END RuleName=append .cfm, RequestURL=library/plant-industry/index.cfm, QueryString=, StopProcessing=true, Succeeded=true URL_REWRITE_END RequestURL=/library/plant-industry/index.cfm This to me is saying that it is handling the url re-write correctly but i am still getting an IIS 404 message. If i go to /library/plant-industry/index.cfm directly in the browser i get my coldfusion file loading Steve -Original Message- From: Steve Onnis [mailto:st...@cfcentral.com.au] Sent: Monday, 10 September 2012 5:26 PM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite Tried that and still nothing. I did notice that the path_info variable is still empty. Wasn't the update meant to correct that? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 5:07 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite For some reason on the upgrade the default document stopped working. Even though in IIS on the top level and on the site level it was listed it just would not work. WHat I had to do was use the cf connector tool to un connect CF then re connect cf. I'm not really sure what went wrong but that seamed to fix it. Just thought it would be worth a shot. Paul. On 10/09/2012 5:04 PM, Steve Onnis wrote: When you say they would not load till I reconnected the site to coldfusion what do you mean? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:56 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite As i mentioned I took CF9 IIS6 to IIS7 CF10 without issue. Paul. On 10/09/2012 4:52 PM, Steve Onnis wrote: It is working on CF9. No issues there. The issues is with CF10 -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:46 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to
RE: [cfaussie] Coldfusion 10 debug nifo covered by black strip
Folks/Steve, this odd-looking error page is indeed a feature of CF10-that is, if you have enabled the new secure profile feature during installation, which Steve must have done (and Dale and others on CF10 not seeing it, had not). So this odd error page Steve's seeing is the result of the HTML generated in a page that's defined as the sitewide error handler (the file pointed to in the corresponding field of the CF Admin server settings page). When the secure profile feature is selected, that sitewide error field is prepopulated with a new pre-written (bland) error CFM page (otherwise, the default is for that sitewide error handler field to be blank on install). So CF10 users with the secure profile enabled will see that new error page on any CF error that is otherwise not handled in their code. Traditionally, any error in CF that's not handled would get the good old CF error page (which showed details or not depending on the robust exception handling setting). With the new secure profile, you see this generic page with little info. It's all about being more secure, of course. :-) But I'm sure many people will be caught out by this for some months/years to come, as people get used to it. As we saw here, even those also on CF10 won't see it, unless they have used the secure profile feature-and only then if they have otherwise unhandled errors. Hope that helps. /charlie From: cfaussie@googlegroups.com [mailto:cfaussie@googlegroups.com] On Behalf Of Dale Fraser Sent: Friday, September 07, 2012 2:16 AM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] Coldfusion 10 debug nifo covered by black strip Yep, have those C:\ColdFusion10\cfusion\wwwroot\CFIDE\administrator\templates\assets Might want to ask Adobe what causes this since we don't see it. Regards Dale Fraser http://dale.fraser.id.au From: cfaussie@googlegroups.com [mailto:cfaussie@googlegroups.com] On Behalf Of Steve Onnis Sent: Friday, 7 September 2012 1:50 AM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] Coldfusion 10 debug nifo covered by black strip It has to be a Coldfusion this. The circle is pointing to /CFIDE/administrator/templates/assets/spot.png view-source:http://www3.scienceimage.csiro.au/CFIDE/administrator/templates /assets/spot.png -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
RE: [cfaussie] Coldfusion 10 debug nifo covered by black strip
Charlie Do you know if you can change it back to the standard error template? I tried to edit the template itself but it is an encrypted template Steve From: Charlie Arehart [mailto:charlie_li...@carehart.org] Sent: Monday, 10 September 2012 11:27 PM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] Coldfusion 10 debug nifo covered by black strip Folks/Steve, this odd-looking error page is indeed a feature of CF10-that is, if you have enabled the new secure profile feature during installation, which Steve must have done (and Dale and others on CF10 not seeing it, had not). So this odd error page Steve's seeing is the result of the HTML generated in a page that's defined as the sitewide error handler (the file pointed to in the corresponding field of the CF Admin server settings page). When the secure profile feature is selected, that sitewide error field is prepopulated with a new pre-written (bland) error CFM page (otherwise, the default is for that sitewide error handler field to be blank on install). So CF10 users with the secure profile enabled will see that new error page on any CF error that is otherwise not handled in their code. Traditionally, any error in CF that's not handled would get the good old CF error page (which showed details or not depending on the robust exception handling setting). With the new secure profile, you see this generic page with little info. It's all about being more secure, of course. :-) But I'm sure many people will be caught out by this for some months/years to come, as people get used to it. As we saw here, even those also on CF10 won't see it, unless they have used the secure profile feature-and only then if they have otherwise unhandled errors. Hope that helps. /charlie From: cfaussie@googlegroups.com [mailto:cfaussie@googlegroups.com] On Behalf Of Dale Fraser Sent: Friday, September 07, 2012 2:16 AM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] Coldfusion 10 debug nifo covered by black strip Yep, have those C:\ColdFusion10\cfusion\wwwroot\CFIDE\administrator\templates\assets Might want to ask Adobe what causes this since we don't see it. Regards Dale Fraser http://dale.fraser.id.au From: cfaussie@googlegroups.com [mailto:cfaussie@googlegroups.com] On Behalf Of Steve Onnis Sent: Friday, 7 September 2012 1:50 AM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] Coldfusion 10 debug nifo covered by black strip It has to be a Coldfusion this. The circle is pointing to /CFIDE/administrator/templates/assets/spot.png view-source:http://www3.scienceimage.csiro.au/CFIDE/administrator/templates /assets/spot.png -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en. -- You received this message because you are subscribed to the Google Groups cfaussie group. To post to this group, send email to cfaussie@googlegroups.com. To unsubscribe from this group, send email to cfaussie+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/cfaussie?hl=en.
RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite
Just an update on this. The url re-write is definatly working. The rewrite logs show the url being re written and the IIS logs also show the expected url being logged but the browser is still showing me the IIS 404-File not found message. I am starting to think that the Enable HTTP status codes setting which i have turned off hasnt actually turned off for the instance i am running. Does anyone know where the setting for this are kept? I assume is it in an XML file somewhere? I would like to double check it Steve -Original Message- From: Steve Onnis [mailto:st...@cfcentral.com.au] Sent: Monday, 10 September 2012 5:39 PM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite it is a pretty basic rewrite. rewrite rules clear / rule name=append .cfm enabled=true stopProcessing=true match url=^(.+) / conditions logicalGrouping=MatchAll trackAllCaptures=false add input={REQUEST_FILENAME} pattern=.cfm negate=true / add input={REQUEST_FILENAME} matchType=IsDirectory negate=true / add input={REQUEST_FILENAME} matchType=IsFile negate=true / /conditions action type=Rewrite url={R:0}/index.cfm logRewrittenUrl=true / /rule /rules /rewrite all it does it make /some-folder/ info /some-folder/index.cfm The logging is showing this REWRITE_ACTION Substitution={R:0}index.cfm, RewriteURL=/library/plant-industry/index.cfm, AppendQueryString=true, LogRewrittenURL=true RULE_EVALUATION_END RuleName=append .cfm, RequestURL=library/plant-industry/index.cfm, QueryString=, StopProcessing=true, Succeeded=true URL_REWRITE_END RequestURL=/library/plant-industry/index.cfm This to me is saying that it is handling the url re-write correctly but i am still getting an IIS 404 message. If i go to /library/plant-industry/index.cfm directly in the browser i get my coldfusion file loading Steve -Original Message- From: Steve Onnis [mailto:st...@cfcentral.com.au] Sent: Monday, 10 September 2012 5:26 PM To: cfaussie@googlegroups.com Subject: RE: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite Tried that and still nothing. I did notice that the path_info variable is still empty. Wasn't the update meant to correct that? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 5:07 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite For some reason on the upgrade the default document stopped working. Even though in IIS on the top level and on the site level it was listed it just would not work. WHat I had to do was use the cf connector tool to un connect CF then re connect cf. I'm not really sure what went wrong but that seamed to fix it. Just thought it would be worth a shot. Paul. On 10/09/2012 5:04 PM, Steve Onnis wrote: When you say they would not load till I reconnected the site to coldfusion what do you mean? -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:56 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite As i mentioned I took CF9 IIS6 to IIS7 CF10 without issue. Paul. On 10/09/2012 4:52 PM, Steve Onnis wrote: It is working on CF9. No issues there. The issues is with CF10 -Original Message- From: Paul Kukiel [mailto:kuki...@gmail.com] Sent: Monday, 10 September 2012 4:46 PM To: cfaussie@googlegroups.com Subject: Re: [cfaussie] coldfusion 10 not working with IIS7 url_rewrite The URL re-write module as part of IIS? If so yes I have that working on http://www.learncf.com and http://www.cfmldocs.com I took the .htaccess files and imported them ( was on iis6 cf9 and helicaon ). I had no issues. Is the site connected properly with the connector tool. I had some issues where the site was working is i used site.com/index.cfm but even though the default docs were set in IIS they would not load till I reconnected the site to coldfusion. Paul. On 10/09/2012 4:40 PM, Steve Onnis wrote: Has anyone had a go at using the IIS7 URL_REWRITE module with CF10 applications? I have it set up on a CF9 server and it is working fine but CF10 just gives me a page not found 404 error. I have enabled the logging for the wrl rewrite module and it is definatly working and re-writting the url but it seems it is not passing it back into the cf server. any ideas? Steve -- You received this message because you are subscribed to the Google Groups cfaussie group. To view this discussion on the web visit https://groups.google.com/d/msg/cfaussie/-/I8y5Df06NHYJ. To post to this group, send email to