Hi,
anyone knows how i can tel what mac or ip address connects onto a port on a
cisco 1900 switch?
there's no command line interface only menus
thanks in advance.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70514t=70514
--
I was supposed to take the security lab exam in San Jose this week;
however, I have to forfeit it 'cause of job related project. My company,
is willing to pay for the security lab in Brussels in July. Anyone has
taken the exam recently? How difficult was it? I have been preparing
for the lab
Jack Nalbandian wrote:
Boy, for a guy who says that he wants to close the thread, you really have a
lot to say.
1. Attacking his motives and attacking his character are
mutually exclusive
endeavors. I attack his motive of defaming the certification
process itself
in a series of different
One thing I learned a few years ago, the hard way:
Each and every BYTE that appears (inbound or outbound) on an AUX port causes
a processor interrupt. This is NOT GOOD.
Put your modem on the CONSOLE port, that is what it is there for.
Jason.
Daniel Cotts wrote in message
news:[EMAIL
Thank you gents,
I have come to the conclusion that Jack and NRF is one and the same person.
Anyone who has seen, or read, Fight Club will recognise the symptoms. Any
minute now NRF will shoot himself through the mouth and end it all.
Seriously though over the years I have passed exams to get
STOP IT! Both of you! :-)
Shawn K.
P.S. This thread has been highly entertaining!
-Original Message-
From: n rf [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 11, 2003 10:28 AM
To: [EMAIL PROTECTED]
Subject: RE: RE: RE: RE: number of CCIE??? [7:70328]
Jack Nalbandian wrote:
Boy, for
Do you have a route to x.x.x.x?
Is that not what I am doing with the statement
ip route 0.0.0.0 0.0.0.0 x.x.x.x
Or do I need to do something more?
Incidentally, the router is not connected to anything - I want to have it
fully pre-configured because we cannot afford to be down for more than a
I asked the same question of Cisco on a Catalyst 5500. They did not
have a command to perform the function. I assume they do not have a
command on the 1900 either.
Thanks
Rich Kerschner, CCNA
Sr. Systems Administrator
Genesis Financial Solutions, Inc.
[EMAIL PROTECTED]
(254) 953-2331 Desk
Running a solaris (v8 I think) box with Lotus Notes on it (new build). We
are having a problem with the server immediately sending a reset to clients
after receiving the syn. Congestion or errors on the segment are
non-existent. I don't control the server so I can't see the logs but I'm
dealing
Anil Gupte 6/11/03 11:08:59 AM
Do you have a route to x.x.x.x?
Is that not what I am doing with the statement
No, you're creating a default route to x.x.x.x. This is not what we're
referring to. We're saying that x.x.x.x has to be reachable before the
router will install your default route.
try show mac-address-table
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70522t=70514
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
Keith/John
Thanks to you both for taking the time to relay your experiences. I think I
will be going with the WaveTech Bootcamp seems like a reasonable deal as it
includes the Cisco books and the CCIE written exam included in the price. My
company is paying for it so the Netgun sounds the best
Show cam?
Brian
The path to a desireable destination
is often more difficult than the path to stay where you are.
On Wed, 11 Jun 2003, Richard Kerschner wrote:
I asked the same question of Cisco on a Catalyst 5500. They did not
have a command to perform the function. I assume they
[EMAIL PROTECTED] wrote:
I asked the same question of Cisco on a Catalyst 5500. They did not
have a command to perform the function. I assume they do not have a
command on the 1900 either.
Why doesn't show cam dynamic work on the 5500 to find the mac address.
Then show ip arp on the
No. But i'll keep my eyes peeled!
Stac
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70526t=70267
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Anil Gupte wrote:
Do you have a route to x.x.x.x?
Is that not what I am doing with the statement
ip route 0.0.0.0 0.0.0.0 x.x.x.x
Or do I need to do something more?
Incidentally, the router is not connected to anything
Therein lies your problem!! You won't see the default
Richard Kerschner wrote:
I asked the same question of Cisco on a Catalyst 5500. They did not
have a command to perform the function. I assume they do not have a
command on the 1900 either.
Thanks
Rich Kerschner, CCNA
Sr. Systems Administrator
Genesis Financial Solutions, Inc.
[EMAIL
This has been an entertaining thread, but the way I see it is this. Maybe
the high/low CCIE would work with the headhunters and that is a different
story, but we have interviewed/employed a number of IT guys over the past
couple of months, CCIE's included and to be honest I do not look to the CCIE
And for the 1900 menu-based series look for something called an Address
Report, or something to that effect. It will display the addresses learned
on each interface.
John
Brian 6/11/03 12:55:10 PM
Show cam?
Brian
The path to a desireable destination
is often more difficult than the
Does the router view the 16MB of Flash as one partition?
Do a show flash all If there is more than one partition it will show that:
router#sh flash all
Partition SizeUsed Free Bank-Size State Copy Mode
1 8192K 6017K 2174K 8192K Read ONLY
Scott Hoover wrote:
Running a solaris (v8 I think) box with Lotus Notes on it (new
build). We
are having a problem with the server immediately sending a
reset to clients
after receiving the syn.
I bet there's a firewall on the server that's blocking access to the port.
Congestion or
Steve Wilson wrote:
Thank you gents,
I have come to the conclusion that Jack and NRF is one and the
same person.
Anyone who has seen, or read, Fight Club will recognise the
symptoms. Any
minute now NRF will shoot himself through the mouth and end it
all.
I think I really am going to go
Mark E. Hayes wrote:
hehehe!!! Well done. I enjoyed that retort. I have to admit
that I did
not know there were lab bootcamps. All of the bootcamps I have
seen are
for the written test. How much does a CCIE lab bootcamp run? I
earned my
MCSE and CCNA fair and square, even though, I did
Robert, the way you described your hiring/screening process is the way I
wished all Corporate America job providers did it.
It's nice to know that at least one business out there doesn't hide
behind an HR group that isn't prepared to perform the screening process
properly and/or fairly.
-Mark
Jack Nalbandian wrote:
[NRF] In this thread, I have attacked what has happened to the
CCIE lately.
Not
the CCIE in general, just what has happened to it lately. This
is a
[JN] Your overall approach has a pattern to it, and your
response ironically
reenforces the notion. The number
One possibility is that the new 3550 is plugged into the same electrical
outlet as the original server and that the NS is more sensitive to power
issues that the 3550. I ran into this one time when the power button on
the back of the PC was set to 230 instead of 115 and it made it re-boot any
Hi Eric,
I have a question for you. Please email me at [EMAIL PROTECTED]
Thanks
Ad L
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70540t=70493
--
FAQ, list archives, and subscription info:
Thanks,
I sucessfully created MPLS VPN on this platform/image, but maybe it is
necessary 2600 family router to test MPLS TE.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70542t=70221
--
FAQ, list archives, and subscription
Is it being load balanced or does it have 2 nics ?
We just went thru this issue with a mail server and load balancing
That had default gateway probs with two nics on separate subnets...
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
At 4:41 PM + 6/11/03, Kaminski, Shawn G wrote:
STOP IT! Both of you! :-)
Shawn K.
P.S. This thread has been highly entertaining!
What is the velocity of the sparrow, measured in CCIE units?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70544t=70328
Hi,
I've got an existing vpn between a pix 515 and a netscreen box. the SA is
up and idle, i can ping across it no sweat but Im getting the following in
my log buffer...
identity doesn't match negotiated identity
any thoughts?
tia,
Rusty
Message Posted at:
I have seen so much about OSPF in NBMA environment but
not about eigrp in NBMA environment. I am surprise
that this isn't captured in the most of text books
since hello packets of eigrp are multicast.
I would like to know your thoughts regard with matter.
=
cheers,
rooban
LOL! OK. I will only accuse you of blatant bias, if that feels better.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of n
rf
Sent: Wednesday, June 11, 2003 12:50 PM
To: [EMAIL PROTECTED]
Subject: RE: RE: RE: RE: number of CCIE??? [7:70328]
Steve Wilson
[NRF] Uh, no the free market responds by giving preference to certain
well-known
elite colleges. Everybody knows that not every bachelor's degree is born
the same. Some are far more valuable than others. Goldman Sachs will send
recruiters to Harvard, but not Podunk Community College. And this
I have seen so much about OSPF in NBMA environment but
not about eigrp in NBMA environment. I am surprise
that this isn't captured in the most of text books
since hello packets of eigrp are multicast. Therefore
it is prone to layer 2 architecture.
I would like to know your thoughts regard with
All,
I have assorted cisco lab equipment for rent (26xx to 12xxx) at $50 an hour.
If you are interested, please email [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70550t=70550
--
FAQ, list archives, and
Howard,
I hate to have to say ;) -
Check the GroupStudy archives - about 12th - 13th Jan 2001.
Best regards,
Dom Stocqueler (another Monty Python fan)
Zoo Keeper (Small Reptiles) - SysDom Technologies
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
sorry for this crass commercial post.
Due to a change in philosophy, plus a couple of other technical avenues I
need to pursue at work, I am s.e.l.l.i.n.g the following Cisco routers to
raise some cash for some new toys:
2513 ( 2S, 1E, 1TR )
2514 ( 2S, 2E )
2514 ( 2S, 2E )
2501 ( 2S, 1E )
so i found a reference to acl's not matching. the netscreen doesn't appear
to have one (but that's not confirmed yet). More news to follow.
-Original Message-
From: Wilmes, Rusty
Sent: Wednesday, June 11, 2003 4:01 PM
To: [EMAIL PROTECTED]
Subject: pix netscreen vpn [7:70547]
Hi,
Larry Letterman wrote:
Is it being load balanced or does it have 2 nics ?
We just went thru this issue with a mail server and load
balancing
That had default gateway probs with two nics on separate
subnets...
Default gateway problems caused it to send TCP resets? What happened to the
rooban Ravi wrote in message
news:[EMAIL PROTECTED]
I have seen so much about OSPF in NBMA environment but
not about eigrp in NBMA environment. I am surprise
that this isn't captured in the most of text books
since hello packets of eigrp are multicast. Therefore
it is prone to layer 2
In eigrp you have to be careful of the following:
In F/R -- split-horizon is disabled on the physical interface, you may need
to enable this on the spokes..
In F/R -- split-horizon is enabled on the subinterfaces (point-to-point or
multipoint) you may need to disable this on the HUB.
also there
I like the bootcamps because I am forced to sit down and do the work. I
could use a personal trainer but then I'd have to drop the chocolate ice
cream too.
Mark
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of n
rf
Sent: Wednesday, June 11, 2003 3:37 PM
To:
All,
Long story short we have a point to point t1 back to corporate. While
using nbar on the router along with sniffers 90% of the traffic is web
based and things like sql transfers and legitimate business traffic is
timing out because of congestion basically the t1 is maxed out during
working
Surely you are joking right? There are plenty of labs out there that
rent rack time for as little as $3/hr.
Ian
www.ccie4u.com
Rack Rentals and Lab Scenarios
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Todd Johnson
Sent: Wednesday, June 11, 2003
Does the BGP backdoor command change the Administrative distance of EGBP
from 20 to 200 ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70561t=70561
--
FAQ, list archives, and subscription info:
Does the BGP backdoor command change the administrative distance of EBGP
from
20 to 200 ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70562t=70562
--
FAQ, list archives, and subscription info:
It looks like a job for Class Based Weighted Fair Queueing (CBWFQing).
As you have already put a sniffer on to identify the legitimate traffic
etc it should be no problem to setup.
If you require further assistance, please do not hesitate to contact me
off-list.
Best regards,
Dom Stocqueler
Not to mention I just realized after posting this my access-list is
screwed up it should be.
Access-list should actually look like this
Access-list 199 permit tcp any any eq www
-Original Message-
From: Dom [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 11, 2003 11:49 PM
To: Elijah
49 matches
Mail list logo
