Re: [c-nsp] ASA EZVPN config

Hi, * Ahmad Cheikh Moussa [EMAIL PROTECTED] wrote: ok, but why active and not idle ? Why shows the ASA AM_Active and the IOS Gateway qm_idle ? On both I used the command show crypto isakmp sa. I think its cosmetic. There is no *_IDLE, at least not in PIX OS 7.2; a strings on the unzipped image

[c-nsp] Netflow stats lost

Hello folks. Did some one know how to prevent this: %C4K_HWNETFLOWMAN-4-FLOWSLOSTERR: Netflow stats lost either due to %hardware hash collisions or full hardware flow table. Stats lost for %150958 packets. This is Cisco 4507 with WS-F4531 Netflow Services Card --

Re: [c-nsp] SUP7203BXL - show cat traf doesnt work ?

This generally indicates that you have a Sup720-base that was upgraded to Sup720-3bxl. The hardware just does not support show cat. IIRC from the Sup720, only the packages that came from the factory as Sup720-3BXL have this counter. --Phil On May 1, 2007, at 9:23 AM, John R wrote: Hi

Re: [c-nsp] Connecting aux to console

--- Jay Hennigan [EMAIL PROTECTED] wrote: Josh wrote: I saw a post here awhile back about connecting the aux port to console port to avoid using a term server, but cannot find it now. Based on the docs that I can find, it looks like I should be using a rollover cable (got that),

Re: [c-nsp] Connecting aux to console

Josh wrote: I have reverse telnet working and verified(I also have an etherswitch module which uses that for internal connectivity). The console on both devices works just fine to my PC, but aux to console doesn't do anything. Aux-to-console *IS* reverse telnet. The questions in my mind:

[c-nsp] combining 7206vxr/G1's - need help on config

Hi list, Im looking to consolidate some 7206VXR w/ NPE-G1 into a core router. Im looking for some suggestions for the following: Ill need about 4 GEs, 16 FEs, 4 OC3/STM-1 in one chassis. I have 3x 7206/G1's now and they do not have enough processor power to handle it. Looking for Cisco

Re: [c-nsp] Modularity for 6500?

Ian MacKinnon wrote: I am about to install some new 6500's with Sup32. Is software modularity a sensible path to take for IOS version? Looking at the release notes, it doesn't support MPLS/OSM/some SIP/SPA but that's ok, I don't need those. I am looking at IP Services. Assuming you are

Re: [c-nsp] combining 7206vxr/G1's - need help on config

Gabriel Graven wrote: Hi list, Im looking to consolidate some 7206VXR w/ NPE-G1 into a core router. Im looking for some suggestions for the following: Ill need about 4 GEs, 16 FEs, 4 OC3/STM-1 in one chassis. I have 3x 7206/G1's now and they do not have enough processor power to handle

[c-nsp] Module Diagnostics failed?

Man, I'm having no end of trouble with this beast... Have people seen these kinds of things before? - 00:01:50: %DIAG-SP-6-RUN_COMPLETE: Module 2: Running Complete Online Diagnostics... 00:02:05: %DIAG-SP-3-MAJOR: Module 2: Online Diagnostics detected a Major

Re: [c-nsp] combining 7206vxr/G1's - need help on config

just be careful since you are moving from a software forwarding based platform to a hardware forwarding based platform you may get a rude shock to find many of things you have grown to know and love are simply unsupported under PFC QoS. just something to be aware of. eg

[c-nsp] NetFlow for Bandwidth Billing

We are a Co-lo provider looking to improve how we do usage-based bandwidth billing on a per IP/subnet basis. We can't do SNMP monitoring per-port (we exclude local LAN traffic, traffic between our two Data Centers, etc), so we are considering doing bandwidth billing via NetFlow from our 72xx

Re: [c-nsp] NetFlow for Bandwidth Billing

Bill Nash wrote: Scope and scale are the two big factors when dealing with netflow accounting. You will need full IP address accounting for your customers, ie knowing which customers have been issued which address space. Got that part covered. You will need an understanding of how