Hi Guys.
I am searching for a good docs for Layer2 or VPLS Egress Policing (PE-to-CE).
Any one knows how to do this? I'm using 7600 with WS-6748 line card. Egress
policing facing is not allowed.
thanks
___
cisco-nsp mailing list
The 2921 was chosen due to the number of phones I could attach to it.
The thing is that the fans sound like they are on high, but show
environment says they are set to low. The router is sitting on a two
post rack with lots of room around it.
Just looked at the official sound figures for the
FYI - Last I checked Brix system can provision (via snmp) ipsla tests to ipsla
enabled Cisco routers, but can not emulate it on their own hardware verifiers
Dave
On 10/20/2011 05:03 AM, Tony Tauber wrote:
At a previous employer, we used Brix Networks which was acquired by EXFO and
is
All,
I'm having an issue with my ESX servers that are connected to our Nexus
5020's using FCOE to connect to our storage MDS9500's. Basically, if for
any reason connectivity (either FCOE or Ethernet) is disrupted to the
5K's, the ESX servers will not recover and will require a reboot to
reconnect
On Tue, Oct 25, 2011 at 08:45:25, Nyman, Eric wrote:
Subject: [c-nsp] HP VM ESX fcoe issues with Nexus 5020
All,
I'm having an issue with my ESX servers that are connected to our
Nexus 5020's using FCOE to connect to our storage MDS9500's.
Basically, if for any reason connectivity
my ios 12.2 SRB doesn't support BFD on port channel , I look for BFD per link ?
which ios dose support ? is there another way to detect port channel failure
Zaid
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
On Tuesday, October 25, 2011 09:58:48 PM zaid wrote:
my ios 12.2 SRB doesn't support BFD on port channel , I
look for BFD per link ? which ios dose support ? is
there another way to detect port channel failure
Are you talking about a 7600?
Mark.
signature.asc
Description: This is a
I am running SXI3 which has the SSH bug that stops SSH logins from working if
you change the HOSTNAME.
Well... I went and changed the hostname and now ssh fails and have to use
Telnet until I find a fix or reboot.
I have tried the procedure to remove the phantom key, but it is logging that it
Hello,
I just upgraded one of my 3750ME switches from 12.2(46)
(c3750me-i5k91-mz.122-46.SE.bin) to 12.2(58) (c3750me-i5k91-mz.122-58.SE2.bin)
and suddenly the switch has allocated an internal vlan for the loopback address:
#show vlan internal usage
VLAN Usage
1006
Hi Manu,
I did try what you suggested. Simply shutting the lo1 interface wasn't enough
to remove the internal vlan assignment, the only way I could make that happen
was to delete the lo1 interface and reload the chassis (ouch). Post-reload, I
manually assigned vlan 1006 and gave it a name as
We have a nexus 5020 and a HDS san (connected via FC module in 5020) in our
lab, and when configuring the storage for the first time, ESX wouldn't discover
the storage until after a reboot of host.
I cant recall the chipset of CNA's in use though, will need to logon and have a
look.
Andrew
11 matches
Mail list logo