Hi All,
I am looking for help. I want to use XR IOS any router on GNS3. Anyone
ever used & any issues? I would be really appreciate any prompt help. I
have Laptop Core i7 with 16 GB RAM on it.
Also What XR IOS need to use?
Much appreciate for prompt reply.
Thanks & Regards,
Ahsan
d to
add on juniper side?
Your replies & suggestions would be appreciated.
Thanks & Regards,
Ahsan Rasheed
Thanks & Regards,
Ahsan Rasheed
On Mon, Feb 20, 2017 at 4:49 PM, Ahsan Rasheed <ahsanrashe...@gmail.com>
wrote:
> Hi All,
>
>
> Our one customer is fac
n? Need
to use ACL on Juniper firewall etc.?
Any help would be appreciated.
Thanks & Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
It would be much appreciated if i
get any help asap.
Is there any workaround if someone knows?
Thanks & Regards,
Ahsan Rasheed
<https://puck.nether.net/mailman/listinfo/juniper-nsp>
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
event spanning-tree status
no cdp enable
spanning-tree bpdufilter enable
end
Thanks Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net
initialized
boot: cannot open flash:
boot: cannot determine first executable file name on device flash:
c2821 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Thanks Regards,
Ahsan Rasheed
On Fri, Apr 24, 2015 at 5:38 AM, Aled Morris al
Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
tell you the configuration .
boot: cannot open flash:
boot: cannot determine first executable file name on device flash:
Thanks Regards,
Ahsan Rasheed
On Thu, Apr 23, 2015 at 6:16 PM, Infratection rgolod...@infratection.com
wrote:
Ahsan, what is your configuration register set to?
Can you
arp automatically when his primary ASA firewall drops the connection and
try to connect the secondary firewall same public IP but different Mac
address.
Thanks Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https
device
takes over the active state then it will send the gratituous arp*
*Regards,*
*Aakil*
Thanks Regards,
Ahsan Rasheed
On Tue, Nov 25, 2014 at 2:34 PM, David White, Jr. (dwhitejr)
dwhit...@cisco.com wrote:
Hi Ahsan,
The customer cannot configure the 'same' IP address on both ASAs
individually but none worked)
mls qos trust dscp
mpls ip
service-policy input IN_FROM_R4
!
Thanks regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http
control. can i use queuing on 6503 interfaces.
Is there any way to prioritize voip traffic on these switches if MQC is not
possible can i do priority Queuing for voip traffic?
I would be thankful appreciated on solutions replies.
Thanks Regards,
Ahsan Rasheed
On Sun, Oct 12, 2014 at 1:37 PM
mls qos trust cos
service-policy input IN_FROM_R3
!
interface GigabitEthernet0/1.50
encapsulation dot1Q 50
mls qos trust cos
xconnect 3.3.3.3 50 encapsulation mpls
service-policy output mpls2ip
!
---
Thanks Regards,
Ahsan Rasheed
---
---
Thanks Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
14 matches
Mail list logo