If you have a complex L2 topology and lots of VLAN per instance. VLANs per MST
instance can become tedious. Might be worth to use some configuration/check
scripts so as to make sure that all VLANs are bound to the right MST instance.
My 2 cents ...
-- Frédéric
Le 27 déc. 2011 à 23:13, Jay
In addition you can check this with the following command:
router-x#show platform hardware pfc mode
PFC operating mode : PFC3CXL
router-x#
For what is worth:
For unknown reason(s) we had to add/swap some linecards and end up with a
chassis having only 3CXL cards (including RSP3CXL)
But this
:
Thanks for the tip. I'm having the vendor issue the command to verify for us.
Our main concern is just making sure that we'll have the 1million IPv4 routes
and 256K netflow capabilities for this box.
Thanks!
Jose
On 6/24/2010 5:56 AM, Frédéric LOUI wrote:
In addition you can check
Le 24 juin 2010 à 16:19, Phil Mayers a écrit :
On 24/06/10 14:53, Frédéric LOUI wrote:
In our lab setup, we have 2 full internet feeds (IPv4 / IPv6) thus ~
67 + v6 prefixes Netflow v9 is working without any issue so far
(without sampling). However we did not test netflow v9 with MPLS