In our lab setup, we have 2 full internet feeds (IPv4 / IPv6) thus ~ 670000 + v6 prefixes Netflow v9 is working without any issue so far (without sampling). However we did not test netflow v9 with MPLS features. According to my technical representative, on 8x10GE card with 3CXL, NDE is handled by the linecard itself (i.e de-centralized NDE instead of centralized NDE from the main RSP board) Not sure about " 4x10GE card upgraded with 3CXL" though
I'd be happy to have some REAL figures regarding MPLS aware netflow with 760x/3CXL :-) -- Frederic Le 24 juin 2010 à 14:21, Lobo a écrit : > Thanks for the tip. I'm having the vendor issue the command to verify for us. > > Our main concern is just making sure that we'll have the 1million IPv4 routes > and 256K netflow capabilities for this box. > > Thanks! > > Jose > > On 6/24/2010 5:56 AM, Frédéric LOUI wrote: >> In addition you can check this with the following command: >> >> router-x#show platform hardware pfc mode >> PFC operating mode : PFC3CXL >> >> router-x# >> >> For what is worth: >> For unknown reason(s) we had to add/swap some linecards and end up with a >> chassis having only 3CXL cards (including RSP3CXL) >> But this command only returned the following output: >> >> router-x#show platform hardware pfc mode >> PFC operating mode : PFC3BXL >> >> router-x# >> >> A reload solved the issue. >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
