Hi TP,
In XR, this would be done through RPL. Please refer to the “unsuppress-route”
attribute in the following configuration guide:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-7/configuration/guide/b-routing-cg-asr9000-77x/implementing-routing-policy.html
Regards,
Hi Mohammad,
XR requires the PE to have a /32 route towards the directly connected CE. This
will enable MPLS on the interface.
PE3:
router static
vrf CORE
address-family ipv4 unicast
172.16.23.2/32
The same thing needs to be done on PE6 towards CE7.
One more thing.
You should specify
--- Begin Message ---
Hi Olivier,
>From what I remember, the issue is that the redistribution is performed from
>the RIB, rather than from the BGP local table and that the community
>attributes are not installed In the RIB.
What I used to do to achieve what you want, was to set a tag in the
