Hi Lee,
You're right and I'm wrong. Have to use BITW.
Thanks for the advise, back to reading more documentation for me.
Best regards,
.pelle
On Tue, Dec 15, 2009 at 4:20 PM, Lee ler...@gmail.com wrote:
On Tue, Dec 15, 2009 at 8:45 AM, Pär Åslund psl...@gmail.com wrote:
Hi Lee,
No, I don't
Hi,
I have problems with a WS-SVC-IPSEC-1 where I'm trying to setup a
site-to-site tunnel.
Last night, I got the tunnel up. But after applying a acl to the 6500,
the tunnel went down and stayed down. Removing configuration just to
get the tunnel up again and continue trying to get the
crypto engine subslot 8/0
crypto connect vlan8
!
interface Vlan8
description inside:cleartext traffic
ip address xxx
crypto map xxx
crypto engine subslot 8/0
Regards,
Lee
On Tue, Dec 15, 2009 at 6:46 AM, Pär Åslund psl...@gmail.com wrote:
Hi,
I have problems with a WS
Hi,
I'm going to downgrade a Cisco 6500 with Sup-720 from 12.2(33)SXI2a to
1.22(18)SXF17 for hardware issue.
I think I have checked everything,
Configuration issues (all commands available)
Hardware support (all modules supported)
Bootloader (not needed on sup-720 for 1.22(18)SXF17 according to
On Wed, Dec 2, 2009 at 6:18 PM, Phil Mayers p.may...@imperial.ac.uk wrote:
Pär Åslund wrote:
Hi,
I'm going to downgrade a Cisco 6500 with Sup-720 from 12.2(33)SXI2a to
1.22(18)SXF17 for hardware issue.
I think I have checked everything,
Configuration issues (all commands available
