Aaron, not surprised here. In case of SR-TE, all the labels are imposed at
the headend (R20) and headend does the validation to make sure the explicit
path is still valid (If you would have specified the adjacency label for
the link R24->R23 then the path would have become invalid after the link
000.pdf
Page5:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/segment-routing/configuration/guide/b-segment-routing-cg-asr9000-62x/b-seg-routing-cg-asr9000-62x_chapter_01000.pdf
Thanks
Dip
On Fri, Sep 18, 2020 at 8:59 AM wrote:
> Thanks dip, but a bit co
It's been almost 4 yrs since I looked at SR-TE. How are you mapping traffic
to your SR-TE tunnels? Like "auto-route announce"?
On Thu, Sep 17, 2020 at 1:34 PM wrote:
> Anyone have ideas why I can't seem to get traffic to flow via this SR-TE
> path? I have configs if you would like to see them.
bel 17001 labels imposed {ImplNull}
[Dip] Hey Mohammad, since the routers are directly connected, PHP will
happen as you can see label imposed is Implicit Null.
-> Another weird issue am facing is that when I change the prefix-sid index
on both XR boxes to (15001 , 15002 respec
Without going too deep right now as I am outside I think mpls ldp igp sync
holddown sec should fix the problem .
On Monday, February 2, 2015, Troy Boutso sensible...@gmail.com wrote:
Hey
I've been rolling out new routers to various sites throughout our
organisation. And in doing so, I've
unnumbered Loopback0
mpls ip
tunnel mode mpls traffic-eng
tunnel destination access-list 90
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng path-option 1 dynamic
tunnel mpls traffic-eng fast-reroute
!
Thanks
Dip
On Thu, Oct 17, 2013 at 3:13 AM, Adam Vitkovsky adam.vitkov
Rathlev pe...@rathlev.dk wrote:
On Tue, 2013-10-15 at 17:29 -0600, dip wrote:
you should be able to see the configs with the help of show derived
config interface Tu65336
Ooh, I didn't know that command. Very nice. :-)
interface Tunnel65336
ip unnumbered Loopback0
no ip
it
will detect that there is a better path ..So if you do show mpls
traffic-eng tunnels tunnel XYZ , it should tell you the shortest
unconstrained Path which is probably what you want it to follow .
Thanks
Dip
On Mon, Oct 14, 2013 at 10:53 AM, Peter Rathlev pe...@rathlev.dk wrote:
On Mon, 2013
may be yersinia fits your need?
http://www.yersinia.net/
On Sunday, June 30, 2013, M K wrote:
HiI am trying to test some features on Catalyst switchesI want attack
tools to test mac layer attacks , Vlan Hopping , DHCP spoofing attacksIs
there any free testing tools to test these ?
Thanks
