Hi Pete,
Thanks for your response, I think you've confirmed our suspicions. We'll
source another chassis:)
James G
-Original Message-
From: Pete Templin [mailto:peteli...@templin.org]
Sent: 24 January 2010 19:00
To: James Greig
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] 6509
'
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] 6509 problem
Hi,
Thanks for the response.
I've pasted below the most prominent errors in the event log.
Again, any ideas or anything to try are appreciated.
2/28 22:44:29.919 E [1]check_ether_packet [1/48]: newpak is NULL!
02/28 22:44
James Greig wrote:
Anyone else have any other thoughts on this? Could it be a bug or a faulty
backplane on the 6500 chassis?
It looks similar to what I got when I toasted a chassis in November. I
didn't capture the console output, but basically the primary Sup was OK
but the rest were all
Hi,
Recently bought a standard 6509 + highspeed fan along with a WS-SUP32-GE-3B
and 2x WS-X6148A-RJ-45. The 6500 boots up fine with the sup32, however,
when it runs a diagnostic on the two switch modules (WS-X6148A-RJ-45) it
fails stating:
*Feb 28 22:29:29.055: %DIAG-SP-3-MAJOR: Module 1:
Hi,
*Feb 28 22:29:29.055: %DIAG-SP-3-MAJOR: Module 1: Online Diagnostics
detected a Major Error. Please use 'show diagnostic result target' to see
test results.
what did the ouput of that command ('show diagnostic result target') give?
*Feb 28 22:29:29.987: %OIR-SP-3-LC_FAILURE: Module 1
[mailto:a.l.m.bu...@lboro.ac.uk]
Sent: 22 January 2010 21:03
To: James Greig
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] 6509 problem
Hi,
*Feb 28 22:29:29.055: %DIAG-SP-3-MAJOR: Module 1: Online Diagnostics
detected a Major Error. Please use 'show diagnostic result target' to
see
test results.
what