Hi Guys,
I found out that the parameter set cos is only available for atm
and frame relay interfaces. Does anyone knows, how to change the Cos
values on a trunk interface ? Is that not possible ? I can't believe
that
no one had a similar issue.
Hints are appreciated.
Regards,
Ahmad
Sitz der
Vayner (avayner); cisco-nsp@puck.nether.net
Subject: AW: [c-nsp] QoS VLAN trunk Port
Hi Guys,
In general, you enable mls qos vlan-based on the trunk, and apply
the
qos policy on the SVI (interface vlan) - even without any L3 config on
the SVI.
For Qos this works very well. I have an aditionall
(avayner) [mailto:[EMAIL PROTECTED]
Gesendet: Sonntag, 20. Juli 2008 21:06
An: Cheikh-Moussa Ahmad; cisco-nsp@puck.nether.net
Betreff: RE: [c-nsp] QoS VLAN trunk Port
Ahmad,
Take a look at Configuring CoS Mutation:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/46sg/con
f
Hi!
I have a general question to QoS VLAN based. I have read a lot of
documentation, but did not found the right answer.
Is it possible to police traffic on an trunk port per vlan ?
For Example, I want to limit vlan 100 to 5Mbps and the vlan 200 to
2Mbps, vlan 300 is unlimited.
4500 --Trunk
on the SVI (interface vlan) - even without any L3 config on
the SVI.
Arie
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Cheikh-Moussa
Ahmad
Sent: Friday, June 06, 2008 17:44 PM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] QoS VLAN trunk Port
Hi!
I
Hi,
If its 4500/4900 you can use Per-Port Per-VLAN QoS
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sg/configuration/guide/qos.html#wp1338610
Nitzan
2008/6/6 Cheikh-Moussa Ahmad [EMAIL PROTECTED]:
Hi!
I have a general question to QoS VLAN based. I have read a lot of
Hi!
Thanks for the hints. I will test it.
Have a nice day,
Ahmad
Sitz der NK Networks Services GmbH: Von-der-Wettern-Straße 15, 51149 Köln
Registergericht: Amtsgericht Köln, Registernummer HRB 30805
Geschäftsführer: Tonis Rüsche
___
cisco-nsp
