Masood Ahmad Shah [EMAIL PROTECTED] 09/25/07 4:12 PM
I have come to this solution and I hope things will get smooth by
using
these interface mode commands
storm-control broadcast level 30 25
storm-control broadcast level 25 15
what do you guys suggest?
Sounds fine, but remember that
Alexandre Snarskii [EMAIL PROTECTED] 09/26/07 12:19 PM
That's if you configured 'storm-control action shutdown'.
We usually configuring 'storm-control action trap', and when storm
detected - only broadcast/multicast traffic is not forwarded anymore,
unicast goes just fine..
Right, I was a
Switch Model: 3550
Some of the ports on the Switch is experiencing Broadcast and Multicast
problems. I want to configure it so that broadcasts do not take more than
30% of the bandwidth and Multicast does not take more than 20% of the
bandwidth. For broadcast traffic, the port should forward
:[EMAIL PROTECTED] On Behalf Of Masood Ahmad Shah
Sent: Tuesday, September 25, 2007 6:50 PM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] Swtich Broadcast/Multicast
Switch Model: 3550
Some of the ports on the Switch is experiencing Broadcast and Multicast
problems. I want to configure it so
