Hi,
Anybody knows what the ESP cards for and does the router work without them?
Regards,
Waseem
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco
Hi Manuel,
What are the supervisor engines that you are using on the 7600 routers.
Regards,
Waseem
From: Manuel Marín m...@transtelco.net
To: Waseem waseem_alir...@yahoo.com
Sent: Wednesday, September 28, 2011 6:27 PM
Subject: Re: [c-nsp] Huawei NE40E-X3 vs
as the document says the router
doesn't support, the maximum is 4x10G XFP.
regards.
From: Manuel Marín m...@transtelco.net
To: Waseem waseem_alir...@yahoo.com
Cc: NSP cisco-nsp@puck.nether.net
Sent: Wednesday, September 28, 2011 10:22 PM
Subject: Re: [c-nsp] Huawei
Is this a POP router? Do you have full BGP table on it? If yes, how many copies?
From: Manuel Marín m...@transtelco.net
To: Waseem waseem_alir...@yahoo.com
Cc: NSP cisco-nsp@puck.nether.net
Sent: Wednesday, September 28, 2011 10:22 PM
Subject: Re: [c-nsp
how do you route for customers who don't have BGP? /30 on the interface then
static route the prefix or the prefix on the inteface?
because, the latter causes a lot of ARP and Spanning tree traffic.
Waseem
- Original Message -
From: Kevin Loch kl...@kl.net
To: NSP cisco-nsp
-arp
ip tcp adjust-mss 1400
speed nonegotiate
no cdp enable
service-policy input POLICY
service-policy output POLICY
end
Regard,
Waseem
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https
It is a regular internet traffic to port 80, from our customers, which should
be CEF switched.
From: Phil Mayers p.may...@imperial.ac.uk
To: Waseem waseem_alir...@yahoo.com
Cc: cisco-nsp@puck.nether.net cisco-nsp@puck.nether.net
Sent: Wednesday, October 5, 2011
On 05/10/11 09:31, Waseem wrote:
Hi,
I'm seeing the following output for show interface gig x/y switching
What platform? What IOS version?
And what is your question?
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net
--
those are captured from dumping the CPU.
do you find anything that make them need special handling?
regards,
Waseem
From: Nick Hilliard n...@foobar.org
To: Waseem waseem_alir...@yahoo.com
Cc: NSP cisco-nsp@puck.nether.net
Sent: Wednesday, October 5, 2011 3:20 PM
Hi, TCP adjust-mss is the key, you were right.
Thanks
Waseem
From: Pete Lumbis alum...@gmail.com
To: Nick Hilliard n...@foobar.org
Cc: Waseem waseem_alir...@yahoo.com; NSP cisco-nsp@puck.nether.net
Sent: Wednesday, October 5, 2011 4:15 PM
Subject: Re: [c-nsp
Hi,
I'm facing several problems in different parts of the network and I want to
capture the traffic for 24Hr of a link nearly 1Gigabit/sec utilized, is there
any tool that can analyze this size of data in real-time.
Regards,
Waseem
___
cisco-nsp
Hi,
Is there any application to manage and traffic engineer BGP prefixes among
multiple circuits?
Regards,
Waseem
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http
Then, how to manage a link failure? you mean create templates? then those
prefixes are divided to customers and those customers are usually upgrading
there subscriptions.
Waseem
From: Mark Tinka mti...@globaltransit.net
To: cisco-nsp@puck.nether.net
Hello,
I inserted spa-2x1ge-v2 on XR device.The SPA has dual ports! How to change the
media type on XR devices?
Regards,
Waseem
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http
Hello,
I'm interested in the 6PE solution to offer IPv6 for customers, for those of
you who have checked this solution in production network please share your
experiences and what are the hardware and software configurations you have??
Kind regards,
Waseem
Hello,
I have a scenario in which I need to advertise (in BGP) my short prefixes (/20)
as longer ones (/24), is there any method to do that automatically in the IOS??
Regards,
Waseem
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https
16 matches
Mail list logo
