show bridge group
On Tue, Jul 28, 2009 at 1:22 PM, Daniel Garrido gara...@gmail.com wrote:
Hi,
I have two 6500 in a LAN connected at layer 2.
Each of them have a SVI with an IP and HSRP working without problems.
When I configure Fallback Bridging in the SVI in both switches, HSRP stop
working,
so I think the problem can be related to a segmented L2 network topology.
I found the following link:
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00800a7af6.shtml
The questions is: How can I check the STP state of the ports connecting to
the MSFC?
The configuration in both switches is like the following:
interface VlanXX
ip address X.X.X.X 255.255.255.0
standby 28 ip X.X.X.Y
bridge-group 1
bridge 1 protocol vlan-bridge
bridge 1 priority 2
Best regards.
--
Daniel
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
