---
---
Thanks Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
mls qos trust cos
service-policy input IN_FROM_R3
!
interface GigabitEthernet0/1.50
encapsulation dot1Q 50
mls qos trust cos
xconnect 3.3.3.3 50 encapsulation mpls
service-policy output mpls2ip
!
---
Thanks Regards,
Ahsan Rasheed
individually but none worked)
mls qos trust dscp
mpls ip
service-policy input IN_FROM_R4
!
Thanks regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http
control. can i use queuing on 6503 interfaces.
Is there any way to prioritize voip traffic on these switches if MQC is not
possible can i do priority Queuing for voip traffic?
I would be thankful appreciated on solutions replies.
Thanks Regards,
Ahsan Rasheed
On Sun, Oct 12, 2014 at 1:37 PM
arp automatically when his primary ASA firewall drops the connection and
try to connect the secondary firewall same public IP but different Mac
address.
Thanks Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https
device
takes over the active state then it will send the gratituous arp*
*Regards,*
*Aakil*
Thanks Regards,
Ahsan Rasheed
On Tue, Nov 25, 2014 at 2:34 PM, David White, Jr. (dwhitejr)
dwhit...@cisco.com wrote:
Hi Ahsan,
The customer cannot configure the 'same' IP address on both ASAs
Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
tell you the configuration .
boot: cannot open flash:
boot: cannot determine first executable file name on device flash:
Thanks Regards,
Ahsan Rasheed
On Thu, Apr 23, 2015 at 6:16 PM, Infratection rgolod...@infratection.com
wrote:
Ahsan, what is your configuration register set to?
Can you
initialized
boot: cannot open flash:
boot: cannot determine first executable file name on device flash:
c2821 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Thanks Regards,
Ahsan Rasheed
On Fri, Apr 24, 2015 at 5:38 AM, Aled Morris al
event spanning-tree status
no cdp enable
spanning-tree bpdufilter enable
end
Thanks Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net
n? Need
to use ACL on Juniper firewall etc.?
Any help would be appreciated.
Thanks & Regards,
Ahsan Rasheed
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
d to
add on juniper side?
Your replies & suggestions would be appreciated.
Thanks & Regards,
Ahsan Rasheed
Thanks & Regards,
Ahsan Rasheed
On Mon, Feb 20, 2017 at 4:49 PM, Ahsan Rasheed <ahsanrashe...@gmail.com>
wrote:
> Hi All,
>
>
> Our one customer is fac
It would be much appreciated if i
get any help asap.
Is there any workaround if someone knows?
Thanks & Regards,
Ahsan Rasheed
<https://puck.nether.net/mailman/listinfo/juniper-nsp>
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
Hi All,
I am looking for help. I want to use XR IOS any router on GNS3. Anyone
ever used & any issues? I would be really appreciate any prompt help. I
have Laptop Core i7 with 16 GB RAM on it.
Also What XR IOS need to use?
Much appreciate for prompt reply.
Thanks & Regards,
Ahsan
14 matches
Mail list logo