Re: [c-nsp] QoS VLAN trunk Port

Hi, If its 4500/4900 you can use Per-Port Per-VLAN QoS http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sg/configuration/guide/qos.html#wp1338610 Nitzan 2008/6/6 Cheikh-Moussa Ahmad [EMAIL PROTECTED]: Hi! I have a general question to QoS VLAN based. I have read a lot of

Re: [c-nsp] RES: Cisco 12406 Etherchannel

You need 12.0(33)S1 Starting in Cisco IOS Release 12.0(33)S, Engine 5 line cards are also supported as the egress interface on which you can configure a virtual interface (EtherChannel or POS channel) for a link bundle. For a list of supported Engine 5 interfaces, see Line Cards Supported on the

Re: [c-nsp] C2960G and output drops

We saw similar problem and we solve it by doing etherchannel on the output interface. Nitzan On Wed, Oct 1, 2008 at 11:19, Gert Doering [EMAIL PROTECTED] wrote: Hi, one of our switches is misbehaving, and I'm wondering whether this is a configuration thing, or a hardware limitation. (It's

Re: [c-nsp] What is the lowest latency switch?

We are using these switches for more them a year with almost no issues It is very stable as L2 and basic L3 (including GRE at line rate ) I didnt test the MPLS yet The latest version R1206 add a lot of features and at last you can do | include ... in any command and you can see drops on the

[c-nsp] Routing IPv6 with IS-IS in NX-OS

If you miss this information and running ipv6 with IS-IS as your IGP NX-OS currently doesn't support ipv6 over IS-IS (rfc5308). I would like to hear a workaround for this limitation (6PE,OSPFv3). Thanks Nitzan ___ cisco-nsp mailing list

Re: [c-nsp] Routing IPv6 with IS-IS in NX-OS

In the case of the ME3800X its a new platform but the nexus is three years old and it have ipv6 from the begining but for some reason they didnt integrate these two new TLV. On Sun, May 22, 2011 at 19:55, Mark Tinka mti...@globaltransit.net wrote: On Sunday, May 22, 2011 08:53:01 PM Nitzan

Re: [c-nsp] Nexus N7K-M132XP-12 powerup

check the source ip/copp and try ftp becouse its large files that couse some problems in tftp BTW I didnt find a way to configure source ip for ftp/tftp trafic like ip ftp source-interface in IOS Nitzan On Sun, Jun 12, 2011 at 23:35, Renelson Panosky panocisc...@gmail.comwrote: Tim Thank

[c-nsp] This week in cisco site

This week Cisco release 3 major versions for ASR1K ME3800 and Nexus 7000. but they think we can configure these features without any configuration guide 1. For the Nexus there is no configuration guide for the new features (mpls/fcoe ...) 2. For the ME3800 the release notes send you to the

Re: [c-nsp] Nexus 7000 MPLS

We are using 5.2 with LDP not RSVP and done some testing of L3VPN PE/CE with OSPF (there is a limit to up to 4 OSPF process but you can open a lot of address-family vrf under each process ). It is interop with Juniper MX without a problem. So far the only MPLS problem we found is that the

Re: [c-nsp] BGP Signalled VPLS

regarding SR one thing that I thing is a problem with it is the number of labels you can push on the smaller hardware platform (ASR901/Juniper ACX) if you want to do a strict path you will have to push a lot of labels and in these platforms you are limited. Nitzan On Wed, Aug 7, 2013 at 6:30

Re: [c-nsp] LNS question asr 1002

Do you talk about ASR-1002x or ASR1002 ? Take a look on this page (Cisco didn't update it with new models for a long time ) http://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/chassis/asrswcfg/scaling.html The 1002 is limited to 12K We didnt test the 1002-x but on a 1004 with

Re: [c-nsp] High speed PPPoE BRAS recommedation?

Take a look at the csr1000v in the latest releases it support BNG and if the total traffic is less then 5G it is good option Nitzan On Mon, Jul 20, 2015 at 12:25 PM, Martin Lorentz m...@goetel.net wrote: Hello, we're in the process of replacing some Juniper ERX BRAS with something more

Re: [c-nsp] Peering Router/Switch

Why not virtual router ? You only need a standard server and a licence This way you can start at lower rates and upgrade later but stay with modern platform In cisco you can take CSR1000v ( up to 10G ) or XRv (not sure about performance ) and in Juniper vMX (up to 40G ) Nitzan On Mon, Oct 5,

Re: [c-nsp] Newbie traceroute question

Take a look on this http://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/mpls/26585-mpls-traceroute.html It use extention based on https://tools.ietf.org/html/rfc4950 Nitzan On Tue, Feb 9, 2016 at 10:06 PM, Matěj Grégr wrote: > Hi Hank, > you can

Re: [c-nsp] IPerf alternative

If you need DPDK based statefull and also HTTP tests take a look on https://github.com/Juniper/warp17 Nitzan On Tue, Aug 8, 2017 at 12:34 AM, James Bensley wrote: > On 7 August 2017 at 11:40, Raymond Burkholder wrote: > > > > on some platforms, like

Re: [c-nsp] call-home and IOS XR

Hank, I have just fight with it last week on NCS540 It has a bug which prevent it from working over VRF If it is not your case (It might be relevant to NCS only ) and DNS is working fine verify you have the following commands crypto ca trustpoint Trustpool crl optional ! crypto ca