Re: [c-nsp] 802.1q - Max Number of Subinterfaces
Depending on the features and speed you require, you might also take a look at 7304 NSE-100 or even NSE-150. This box can handle even more that 4k vlans. Aivars Thursday, April 12, 2007, 6:17:42 PM, you wrote: JS I am interested in recommendations on a Cisco unit that will terminate a minimum JS of 2000 (preferably 4096) VLANs. JS The ethernet (Gig or Fast) will be set to trunk. JS I've tested SVI on a couple of switches and 802.1Q subints on routers but am JS finding conflicting documentation regarding the maximum number of VLANs that JS various pieces of equipment support. JS Will a 7206VXR suffice for this purpose? Is there unit better suited and JS possibly less cost? ___ cisco-nsp mailing list [EMAIL PROTECTED] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] 802.1q - Max Number of Subinterfaces
Hello: -Original Message- From: [EMAIL PROTECTED] [mailto:cisco-nsp- [EMAIL PROTECTED] On Behalf Of J Springer Sent: Thursday, April 12, 2007 8:18 AM To: [EMAIL PROTECTED] Subject: [c-nsp] 802.1q - Max Number of Subinterfaces I am interested in recommendations on a Cisco unit that will terminate a minimum of 2000 (preferably 4096) VLANs. The ethernet (Gig or Fast) will be set to trunk. I've tested SVI on a couple of switches and 802.1Q subints on routers but am finding conflicting documentation regarding the maximum number of VLANs that various pieces of equipment support. Will a 7206VXR suffice for this purpose? Is there unit better suited and possibly less cost? Something to be aware of is the per-interface sub-interface limits for the various cards. Perhaps someone has a pointer to an official Cisco document, but I *think* almost all of the FE/GE interfaces on the 7200-series support up to 256 sub-interfaces. Thus, you'd have to have multiple interfaces to hit the chassis limit. Regards, Mike ___ cisco-nsp mailing list [EMAIL PROTECTED] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] 802.1q - Max Number of Subinterfaces
Something to be aware of is the per-interface sub-interface limits for the various cards. Perhaps someone has a pointer to an official Cisco document, but I *think* almost all of the FE/GE interfaces on the 7200-series support up to 256 sub-interfaces. Thus, you'd have to have multiple interfaces to hit the chassis limit. This matters. I would like to terminate the vlans on a single g/f interface. It doesn't matter if it's a router or L2/L3 switch. IDB limits are important. Also, for a switch, the max number of active VLANs is relevant (this is often lower than 4K). Does the same limitation apply using SVI on a switch? L3 switches often have lower limits than a router. If you really want to terminate many thousand of VLANs in one box, you should seriously consider an aggregation platform like the Cisco 1 or Juniper ERX. As an example, the Juniper ERX-310 (3U) can terminate 16K IP interfaces (and a corresponding number of VLANs) in one box, with hardware based forwarding. See the system maximums section at http://www.juniper.net/techpubs/software/erx/junose72/sw-rn-erx723/html/sw-rn-erx723-app-A-sysmax.html Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] ___ cisco-nsp mailing list [EMAIL PROTECTED] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/