I recently moved gateways and went from MGCP to H323 and now the paging port
doesn't hang up and lets a beeping tone through for about 15 seconds then
rolls to fast busy.
Do I need to adjust the hookflash timeout?
___
cisco-voip mailing list
Hi All,
I have an issue where apparently the phones (6921's) start to ring and someone
picks them up and no one is there, they put the phone down and it keeps
ringing. Also, on occassion, they go to transfer the phone and it gets cut off.
Any ideas?
REgards
Cos
Check CDR records/CallManager traces. If there's nothing there, you'll
have to start looking into running packet captures.
On Wed, Oct 8, 2014 at 10:38 AM, costas georgiou ckos1...@hotmail.com
wrote:
Hi All,
I have an issue where apparently the phones (6921's) start to ring and
someone
Trying to add an alternatehostname in CUCM 10.5 I got the below error. Anyone
spot my problem?
set web-security CH Hawaii Department of Boating Honolulu Hawaii US
ton.state.hi.us HI-IT-UC-CM-P.ton.state.hi.us myphone.ton.state.hi.us
Expected 4 mandatory and up to 2 non-mandatory
I'm not sure if this helps you or not, but you can have per CSF config
files. Just go into the CSF device in CUCM, scroll to the last field
(Cisco Support Field) and type in something like
*configurationFile=jason-jabber-config.xml
*(all lower case but the name is really unimportant. Could have
That's good to hear. I sent my earlier reply before I saw this one because
Gmail treat this email like it wasn't a part of the same thread.
I too am facing the lack of LDAP support via MRA and as a result deploy
100% UDS to make the user experience consistent between in the office and
out of the
I thought you could only add a single SAN via command line.
On Wed, Oct 8, 2014 at 11:20 AM, Jason Aarons (AM)
jason.aar...@dimensiondata.com wrote:
Trying to add an alternatehostname in CUCM 10.5 I got the below
error. Anyone spot my problem?
set web-security CH Hawaii Department of
Been a while since I have had to do much with CCX.
I remember back in the day we could set up some string variables,
concatenate them and have a nice clean way to cut our script in half when
doing two different languages.
For instance:
1 - English (set language string to EN)
2 - Spanish (set
That should work if you have the prompts stored in the EN and SP folders.
What issue are you seeing?
On Wed, Oct 8, 2014 at 1:24 PM, Erick Wellnitz ewellnitzv...@gmail.com
wrote:
Been a while since I have had to do much with CCX.
I remember back in the day we could set up some string
I don't see any reason they needed to do it that way that I'm aware of.
Everyone writes code differently so maybe it made more sense to them to do
it that way.
On Wed, Oct 8, 2014 at 2:43 PM, Erick Wellnitz ewellnitzv...@gmail.com
wrote:
I'm working on someone else's script today and was
There's also the multiserver cert in 10.5 that allows you to add additional
entries via OS Admin.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_CE15D2A0_00_cucm-release-notes-1051/CUCM_BK_CE15D2A0_00_cucm-release-notes-1051_chapter_01.html#CUCM_RF_SEC52373_00
If you would like to support multiple languages in UCCX, it's rather easy
and convenient. The explanation is long, but the idea is simple.
Here's an example to point you in the right direction:
Say you had a script like this and its trigger language was set to en_US
Start
Accept (--Triggering
I get that everyone does it different. I was just making sure I hadn't
missed some weird change that may have impacted how we have to set up
multiple languages.
On Wed, Oct 8, 2014 at 12:48 PM, Brian Meade bmead...@vt.edu wrote:
I don't see any reason they needed to do it that way that I'm
Now that's a slick way to do it. That will definitely make life easier in
the future.
Thanks!
On Wed, Oct 8, 2014 at 12:54 PM, Anthony Holloway
avholloway+cisco-v...@gmail.com wrote:
If you would like to support multiple languages in UCCX, it's rather easy
and convenient. The explanation
Chiming in to second Anthonys message here which is spot on.
This approach follows our best practices methodology and is how I would
recommend approaching multiple languages.
.
On Wed, Oct 8, 2014 at 11:54 AM, Anthony Holloway
avholloway+cisco-v...@gmail.com wrote:
If you would like to
I believe there is a bug with 10.5 that causes phone registration to reset
every 7 minutes or so.
Dennis Heim | Collaboration Solutions Architect
World Wide Technology, Inc. | +1 314-212-1814
[cid:image001.png@01CFE30A.AC268F20]https://twitter.com/CollabSensei
So I couldn't find a GUI method to add an AlternateSubjectName. My problem
with the CUCM 10.5 CLI was only a single SAN (Subject Alternate Name) is
supported. Once I removed the other entries it worked.
For whatever reason in show web-security the server name is also listed as a
17 matches
Mail list logo