Im on the road, but there was a similar bug for this. Can’t seem to find it.
It’s TFTP based issue from memory.
You had to de-activate and re-activate the TFTP services.
From: cisco-voip on behalf of Anthony
Holloway
Date: Wednesday, 4 September 2019 at 12:03 pm
To:
So, I just ran into something interesting where someone else took care of
the certs for a CUCM I now have access to, and while the main CCMAdmin
pages load fine in my browser with a full chain of trust, the 6972 page(s)
are being delivered as EC certs, which were not signed, and thus, I get a
As with most things, I think you're safe doing what makes the most sense
for your given set of requirements.
The design guide does mention a few key points on the topic.
I found what I needed on Youtube. There are some videos there that are from
"NetworkChuck" that have good explanations and items that I captured and will
make into slides.
On Tuesday, September 3, 2019, 12:14:22 PM CDT, Charles Goldsmith
wrote:
Well, if your setup has 1 site, and
Well, if your setup has 1 site, and all phone are setup the same, it is a
simple process, you can even copy a phone. However, anything more complex
than that, and you could get bad results, like if someone dialed emergency
services and it went out the wrong location.
If you have already setup
I have already done that which is why I am asking a question here for training.
Thank you for the prompt reply.
On Tuesday, September 3, 2019, 12:07:53 PM CDT, Charles Goldsmith
wrote:
John, the settings in your system are very specific to your site and setup.
If you are not
John, the settings in your system are very specific to your site and
setup. If you are not familiar with it, I'd advise you to reach out to
your partner / VAR for assistance.
On Tue, Sep 3, 2019 at 11:59 AM John Huston via cisco-voip <
cisco-voip@puck.nether.net> wrote:
> Hello,
>
> Is there a
Hello,
Is there a location where I can find some slides on how to setup a phone in an
existing system from start to finish? The Route Groups, Route Lists and Route
Patterns are already setup.
Thank you in advance for your help.
___
cisco-voip
Thank you guys for all your feedback! This exactly what we were looking for
with this move.Based on the responses, we'll need to do the HA WAN and new
hostname. Current config has the device pool as UCCX_ABC, so the agents
would eventually fail-over to CUCM Sub C in DC2. CUCM Sub A and B, as well