Re: [cisco-voip] EMCC vs Cluster SIP trunk with call forwarding

Alternatively you could create a pilot on the 9.1 system to use the 10.5 voicemail rather than sending the calls across the CUCM SIP trunk. Just send it via a SIP trunk directly to CUC. Hank From: cisco-voip > on

Re: [cisco-voip] Columbia CUBE to Claro outbound issue

___ From: cisco-voip <cisco-voip-boun...@puck.nether.net<mailto:cisco-voip-boun...@puck.nether.net>> on behalf of Hank Keleher (AM) <hank.kele...@dimensiondata.com<mailto:hank.kele...@dimensiondata.com>> Sent: Sunday, April 3, 2016 8:35 PM To: Daniel Pagan; Horton, Jami

Re: [cisco-voip] Columbia CUBE to Claro outbound issue

343111) of the request URI, and 3) could not find a route to the destination. Hope you find this helpful. - Dan From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hank Keleher (AM) Sent: Saturday, April 02, 2016 11:10 PM To: Horton, Jamin <jamin.hor...@oneneck.com<mailto:jam

Re: [cisco-voip] Columbia CUBE to Claro outbound issue

ssion transport protocol. They were expecting UDP and I was using TCP. Try playing around with it. I believe you can do it under "voice service / sip" as well as the individual dial peer. Hope it helps! Sent from my iPhone forgive any typos On Apr 2, 2016, at 11:43 AM, Hank Keleher (A

Re: [cisco-voip] Columbia CUBE to Claro outbound issue

-voip] Columbia CUBE to Claro outbound issue Are you always getting the same 404 "unallocated number" response? Thanks, Ryan > On Apr 2, 2016, at 1:05 PM, Hank Keleher (AM) > <hank.kele...@dimensiondata.com<mailto:hank.kele...@dimensiondata.com>> wrote: > > Gre

[cisco-voip] Columbia CUBE to Claro outbound issue

Greetings! Does anyone have a CUBE configuration that works with Claro based in Columbia you can share with me? I have inbound working just fine but oubound keeps getting rejected. Below is an example of the config and relevant debug. They are saying that it should work even though I’ve

[cisco-voip] Voicemail failing over MRA when using SSO

I’ve searched far and wide for an answer to this and so far only found one Cisco supportforums post with no answer, hopefully someone here has experienced this and can provide some direction. I currently have 10.5.2 CUCM, CUC and IM configured with 8.7 Expressway with MRA and 11.1.2 Windows

Re: [cisco-voip] Voicemail failing over MRA when using SSO

;> Cc: "cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>" <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Subject: Re: [cisco-voip] Voicemail failing over MRA when using SSO Sounds like this bug- https://tools.cisco.com/bugsearch/bug/CSCux529

Re: [cisco-voip] Cisco 8841 VPN phone issue

TFTP on the phone by enabling alt-tftp but that should not be required. If it works as expected with cert-based VPN but not username/password then this likely a phone bug. Please open a TAC SR so it can be investigated further. -Ryan On Sep 10, 2015, at 11:06 AM, Hank Keleher (AM) <hank.kele...@dimens

Re: [cisco-voip] Cisco 8841 VPN phone issue

u're using. On Wed, Sep 9, 2015 at 11:49 PM, Hank Keleher (AM) <hank.kele...@dimensiondata.com<mailto:hank.kele...@dimensiondata.com>> wrote: I do, yes. Thanks! Hank From: <bmead...@gmail.com<mailto:bmead...@gmail.com>> on behalf of Brian Meade Date: Wednesday, Septemb

[cisco-voip] Cisco 8841 VPN phone issue

Greetings! I’ve setup a new server using 10.5.2 for VPN using 8841’s and username and password (not certificate). I followed the details in the following features configuration guide for VPN client.

Re: [cisco-voip] Cisco 8841 VPN phone issue

ccess (MRA) feature. More information about this can be found here - https://tools.cisco.com/squish/92527f. In order for the phone to start the VPN sign-in process instead of the MRA sign-in process you must have a TFTP set on the phone, either via DHCP or manually. Joe On Sep 9, 2015, at

Re: [cisco-voip] Cisco 8841 VPN phone issue

dress. The phone will use it after the VPN connection is established to download its configuration file. Joe On Sep 9, 2015, at 8:02 PM, Hank Keleher (AM) <hank.kele...@dimensiondata.com<mailto:hank.kele...@dimensiondata.com>> wrote: What should the TFTP address be set to for the remot

Re: [cisco-voip] Cisco 8841 VPN phone issue

UCM? On Wed, Sep 9, 2015 at 9:17 PM, Hank Keleher (AM) <hank.kele...@dimensiondata.com<mailto:hank.kele...@dimensiondata.com>> wrote: Joe, thanks for the recommendation. Here’s what we experienced: We set the TFTP address to the local server and restarted the phone. It sat on regis

[cisco-voip] License requirements to upgrade from 12.4 to 15

I have a customer with 18 2800 voice gateways in production and 5 cold spares. Are they required to purchase a license in order to upgrade from 12.4 to 15 for the base and/or voice features? For the cold spares would they need to have those under SmartNET in order to swap them out with a