OK, so here's where I'm at. Probably not a recommended or common activity, but
it's where we're at. I've accepted the fact I might have to start over again.
I've (1) rebuilt a v7 CallManager cluster in the lab, (2) restored from backup,
(3) applied new re-hosted licenses, (4) applied the
Lelio,
Once you install the latest refresh.cop file you do not have to rehost your
licenses to upgrade to 9. You can do the following: (per the jump upgrade
guide):
Install fresh 7.X server on Vmware (Using the same IP addresses and hostnames)
Install upgrade.cop
Restore your DRS Backup
Thanks Tommy. I'm using HP equivalent MCS servers, so the jump upgrade does not work. Tried it, failed. Got feed back from the group that it's not supported.---Lelio Fulgenzi, B.A.Senior Analyst, Network InfrastructureComputing and Communications Services (CCS)University of Guelph519‐824‐4120 Ext
9.1.2.1-28
I'm trying to set up a trusted relay pointfor my VPN phones so that we can
get audio and video from VPN phone to VPN phone. For security reasons we
are not able to make changes to the ASA to enable direct VPN to VPN
communication. I have plenty of PVDM3 resources available.
If I
Erick,
What codecs did you configure on the IOS box?
Also, you'll need to use codec passthrough on it for video to work. The
software MTPs do codec passthrough by default.
Brian
On Tue, Mar 18, 2014 at 1:49 PM, Erick Wellnitz ewellnitzv...@gmail.comwrote:
9.1.2.1-28
I'm trying to set
g711u. I didn't do codec passthrough.
On Tue, Mar 18, 2014 at 1:06 PM, Brian Meade bmead...@vt.edu wrote:
Erick,
What codecs did you configure on the IOS box?
Also, you'll need to use codec passthrough on it for video to work. The
software MTPs do codec passthrough by default.
Brian
You might want to add additional dspfarm profiles for G.722 and G.729 in
case your calls are using those codecs instead. Also might be an issue
with the region your IOS MTP is in.
Brian
On Tue, Mar 18, 2014 at 2:39 PM, Erick Wellnitz ewellnitzv...@gmail.comwrote:
g711u. I didn't do codec
I tried installing the Refresh COP file and got the error that upgrades are not permitted.I tried uploading the license files but got a "file already exists" error.I used the "file delete license" command, deleted the files, uploaded them again, and the Refresh COP file install seems to be
Setting codec passthrough did the trick. I'll set up additional profiles to
match our configuration globally.
Thanks for the heads up on the codec passthrough.
On Tue, Mar 18, 2014 at 2:25 PM, Brian Meade bmead...@vt.edu wrote:
You might want to add additional dspfarm profiles for G.722 and
Folks:
I have a quick questions with regards to LBM traces and operations.
LBM traces print the location-to-location relationship in a bi-directional
format. For example, when the requested reservation is added in LBM for a call
using a single location link:
On one line I'll see...
RES_REC
10 matches
Mail list logo
