How does the Stock Unified CCX Historical System License Utilization
Hourly Report (and then switch it to the line chart) work for you? I like
it because it shows my busy hour port usage.
On Mon, Mar 16, 2015 at 8:36 PM Andrew Grech agrec...@gmail.com wrote:
Hey All,
Within the standard
For clarity, by “higher bandwidth codec” I meant to say higher bit-rate codec,
or codec of higher bandwidth consumption.
- Dan
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Daniel Pagan
Sent: Monday, March 16, 2015 9:08 PM
To: Ryan Huff; cisco-voip@puck.nether.net
-- Forwarded message --
From: Andrew Grech agrec...@gmail.com
Date: Tue, Mar 17, 2015 at 1:24 PM
Subject: Re: [cisco-voip] UCCX 10.6 Standard CUIC Concurrent Peak Call
Report
To: Anthony Holloway avholloway+cisco-v...@gmail.com
Thanks Anthony,
Its close but no cigar.. For this
Hey Ryan how’s it going? Transcoder allocated by CUCM comes from the side using
a higher bandwidth codec, regardless if it’s the calling or called party, with
the intention to avoid streaming a high bandwidth consuming codec over a WAN
connection – keeping it local to the LAN. Of course, this
Thanks Dainel! I probably knew that at some point, but I couldn't remember for
the life of me! Makes total sense.
Thanks,
Ryan
Original Message
From: Daniel Pagan dpa...@fidelus.com
Sent: Monday, March 16, 2015 09:16 PM
To: Daniel Pagan dpa...@fidelus.com,Ryan Huff
When xcoding is required in the call setup, which side is transcoded? The
called party or the calling party?
Thanks___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Hey All,
Within the standard version of CUIC can some give me some guidance on how
to create a peak concurrent call volume report?
I can do lots of summary reports..
Many thanks
Andrew
___
cisco-voip mailing list
cisco-voip@puck.nether.net
However, I think this is getting close to the just because you can, doesn’t
mean you should.
Dennis, you must have had the same VCP trainer I did, that was a frequent
refrain.
If you want to go really cheap load up a host with HDDs and run a FreeNAS VM on
it. Obviously for testing purposes
A customer pointed out that Cisco doesn’t support Windows 7 64-bit for Self
Care Portal in 10.5.
Seems odd.
++
Guess we are out of luck. All of our PC’s are running Windows 7 64bit.
This sounds like a bug or maybe the user doesn’t have the required roles to
access the page?
Windows 7 64 bit certainly works fine with every version through 10.6 that I
have tested with.
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jason
Aarons (AM)
Sent:
No one really uses the 64 bit browsers. This is browsers not Oss.
https://www.java.com/en/download/faq/java_win64bit.xml
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jason
Aarons (AM)
Sent: Monday, March 16, 2015 7:28 AM
To: cisco-voip
Ya it’s a common topic… “why isn’t Windows XP supported with CAD/Finesse?!”… uh
because Microsoft doesn’t! though it still works. Upgrade your desktops!
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Anthony Holloway
Sent: Monday, March 16, 2015 10:47 AM
To: Jason
and what it supports now is all it will support. They are not continuing
the product moving forward. Great product. have used it for years. Call
to see if they were going to support the 8861 as that is our new
standardized model and found out it's not getting anything new. Guess we
will look
It’s the fact the Cisco doesn’t support Window 7 64-bit is a concern to the
customer. Only 32-bit.
From: Kevin Przybylowski [mailto:kev...@advancedtsg.com]
Sent: Monday, March 16, 2015 9:35 AM
To: Jason Aarons (AM); cisco-voip (cisco-voip@puck.nether.net)
Subject: RE: Win 7 64-bit not supported
Thanks Roger and everyone for the replies, its been very helpful.
Terry
Sent from my iPhone
On 14 Mar 2015, at 11:27 pm, Roger Wiklund roger.wikl...@gmail.com wrote:
We use Acme 3820 with our UCaas platform. Behind it we serve Cisco,
Mitel, Avaya and Lync PBX:es.
You can't go wrong with
This is exactly what I have for my home lab, and iscsi mounts for the
datastores. It works really well.
On Mon, Mar 16, 2015 at 7:50 AM, Ryan Ratliff (rratliff) rratl...@cisco.com
wrote:
Dennis, you must have had the same VCP trainer I did, that was a frequent
refrain.
If you want to go
I have CUCM 10.5.2
SX20 with 7.3.1 code.
SX20 is registered successfully to CUCM. I can change the display name, the
extension etc.. apply changes from CUCM and the endpoint learns of the
changes and looks correct. So I'm guessing its properly downloading its
config file and applying settings.
17 matches
Mail list logo
