Re: [cisco-voip] CCME & Handset Call forwards

[Brian Meade]

Actually probably want "show run | i ephone-dn | number | call-forward all"

On Thu, Oct 6, 2016 at 12:53 AM, Brian Meade  wrote:

> show run | i call-forward all
>
> On Thu, Oct 6, 2016 at 12:18 AM, Quenten Grasso 
> wrote:
>
>> Hi All,
>>
>>
>>
>> Were running CME w/ 7960 handsets, Is there a way to see which phones if
>> any have call forwards setup by the users at the phone level without
>> visiting every handset?
>>
>>
>>
>> Regards,
>>
>> Quenten
>>
>>
>>
>> ___
>> cisco-voip mailing list
>> cisco-voip@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] CCME & Handset Call forwards

[Brian Meade]

show run | i call-forward all

On Thu, Oct 6, 2016 at 12:18 AM, Quenten Grasso  wrote:

> Hi All,
>
>
>
> Were running CME w/ 7960 handsets, Is there a way to see which phones if
> any have call forwards setup by the users at the phone level without
> visiting every handset?
>
>
>
> Regards,
>
> Quenten
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] CCME & Handset Call forwards

[Quenten Grasso]

Hi All,

Were running CME w/ 7960 handsets, Is there a way to see which phones if any 
have call forwards setup by the users at the phone level without visiting every 
handset?

Regards,
Quenten

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] 8851 and Transfers

[Carlo Calabrese via cisco-voip]

Are you running 10-3-1-20?  I think that is the one with the bugwe are running 
10-2-2-16 

On Wednesday, October 5, 2016 2:28 PM, "Haas, Neal"  
wrote:
 

 #yiv2085856756 #yiv2085856756 -- _filtered #yiv2085856756 
{font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv2085856756 
{panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv2085856756 
{font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv2085856756 
#yiv2085856756 p.yiv2085856756MsoNormal, #yiv2085856756 
li.yiv2085856756MsoNormal, #yiv2085856756 div.yiv2085856756MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv2085856756 a:link, 
#yiv2085856756 span.yiv2085856756MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv2085856756 a:visited, #yiv2085856756 
span.yiv2085856756MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv2085856756 
p.yiv2085856756msonormal0, #yiv2085856756 li.yiv2085856756msonormal0, 
#yiv2085856756 div.yiv2085856756msonormal0 
{margin-right:0in;margin-left:0in;font-size:12.0pt;}#yiv2085856756 
span.yiv2085856756EmailStyle18 {color:#1F497D;}#yiv2085856756 
.yiv2085856756MsoChpDefault {font-size:10.0pt;} _filtered #yiv2085856756 
{margin:1.0in 1.0in 1.0in 1.0in;}#yiv2085856756 div.yiv2085856756WordSection1 
{}#yiv2085856756 No side Car, and this is a shared line across multiple phones. 
   Thank You,    Neal Haas    From: Carlo Calabrese 
[mailto:carlo_calabrese2...@yahoo.com]
Sent: Wednesday, October 5, 2016 2:17 PM
To: Haas, Neal ; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] 8851 and Transfers    Does this have a Side Car? we 
had a problem with this awhile back, not sure if same model but we had to roll 
back.    On Tuesday, October 4, 2016 7:16 PM, "Haas, Neal" 
 wrote:    We have 8851 phones, just upgraded to the new 
firmware, now we have issues.


When a phone call is in the process of being transferred and a new call comes 
in the phone will not let you finish the transfer. How can we stop this issue?

Anyone have a solution - besides rolling back the firmware?




Neal Haas
?
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

   ___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] 8851 and Transfers

[Carlo Calabrese via cisco-voip]

Does this have a Side Car? we had a problem with this awhile back, not sure if 
same model but we had to roll back. 

On Tuesday, October 4, 2016 7:16 PM, "Haas, Neal"  
wrote:
 

 We have 8851 phones, just upgraded to the new firmware, now we have issues.


When a phone call is in the process of being transferred and a new call comes 
in the phone will not let you finish the transfer. How can we stop this issue?

Anyone have a solution - besides rolling back the firmware?




Neal Haas
?
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


   ___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] 8851 and Transfers

[Haas, Neal]

No side Car, and this is a shared line across multiple phones.

Thank You,

Neal Haas

From: Carlo Calabrese [mailto:carlo_calabrese2...@yahoo.com]
Sent: Wednesday, October 5, 2016 2:17 PM
To: Haas, Neal ; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] 8851 and Transfers

Does this have a Side Car? we had a problem with this awhile back, not sure if 
same model but we had to roll back.

On Tuesday, October 4, 2016 7:16 PM, "Haas, Neal" 
> wrote:

We have 8851 phones, just upgraded to the new firmware, now we have issues.


When a phone call is in the process of being transferred and a new call comes 
in the phone will not let you finish the transfer. How can we stop this issue?

Anyone have a solution - besides rolling back the firmware?




Neal Haas
?
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[Carlo Calabrese via cisco-voip]

Have you tried changing the mac address on CUCM and let the ATA auto register? 
do both MAC address  

On Wednesday, October 5, 2016 8:42 AM, Asim Mekki Basheer 
 wrote:
 

  Yes allowed since the 
IP PHONES connected to the same port.

Regards
ASIM MEKKI



From: Lisa Notarianni 
Sent: Wednesday, October 5, 2016 6:23 AM
To: Asim Mekki Basheer
Subject: RE: [cisco-voip] Cisco ATA 186 Are you sure the IP and port are 
configured to allow the device to work in the voice VLAN?  From: Asim Mekki 
Basheer [mailto:asim_...@hotmail.com]
Sent: Wednesday, October 05, 2016 9:23 AM
To: Lisa Notarianni ; Ashwani Ranpise 
; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186  Yes its ATA 186 From: Lisa Notarianni 

Sent: Wednesday, October 5, 2016 6:15 AM
To: Asim Mekki Basheer; Ashwani Ranpise; mailto:cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Cisco ATA 186 I have had this issue but the network 
configuration did not allow it to register or the device type is different than 
what you are actually trying to configure.  It is a ATA 186 correct?  From: 
cisco-voip [mailto:cisco-voip-boun...@puck.nether.net]On Behalf Of Asim Mekki 
Basheer
Sent: Wednesday, October 05, 2016 9:13 AM
To: Ashwani Ranpise ;mailto:cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186  please see the attached still showed 
rejected even after assigned The DN Thanks ASIMFrom: Ashwani Ranpise 

Sent: Wednesday, October 5, 2016 5:55 AM
To: Asim Mekki Basheer
Subject: Re: [cisco-voip] Cisco ATA 186 Asim,I dont see any DN has been 
assigned.  Assign the DN to your ATA-186 device and it will work.Thanks,Ashwani 
On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer  wrote:
Hello Everyone we have CCM 7.5 ,recently we faced issue with fax the ATA showed 
rejected in the call manager we make factory reset the same  issue Regards  
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


   ___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[Asim Mekki Basheer]

Yes allowed since the IP PHONES connected to the same port.



Regards


ASIM MEKKI




From: Lisa Notarianni 
Sent: Wednesday, October 5, 2016 6:23 AM
To: Asim Mekki Basheer
Subject: RE: [cisco-voip] Cisco ATA 186


Are you sure the IP and port are configured to allow the device to work in the 
voice VLAN?



[Lisa Notarianni White Logo Business Card]



From: Asim Mekki Basheer [mailto:asim_...@hotmail.com]
Sent: Wednesday, October 05, 2016 9:23 AM
To: Lisa Notarianni ; Ashwani Ranpise 
; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186





Yes its ATA 186



From: Lisa Notarianni 
>
Sent: Wednesday, October 5, 2016 6:15 AM
To: Asim Mekki Basheer; Ashwani Ranpise; 
cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Cisco ATA 186



I have had this issue but the network configuration did not allow it to 
register or the device type is different than what you are actually trying to 
configure.  It is a ATA 186 correct?



[Lisa Notarianni White Logo Business Card]



From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Asim 
Mekki Basheer
Sent: Wednesday, October 05, 2016 9:13 AM
To: Ashwani Ranpise >; 
cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186





please see the attached still showed rejected even after assigned The DN



Thanks



ASIM



From: Ashwani Ranpise >
Sent: Wednesday, October 5, 2016 5:55 AM
To: Asim Mekki Basheer
Subject: Re: [cisco-voip] Cisco ATA 186



Asim,

I dont see any DN has been assigned.  Assign the DN to your ATA-186 device and 
it will work.

Thanks,

Ashwani



On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
> wrote:

Hello Everyone



we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in 
the call manager we make factory reset the same  issue



Regards





___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] CUCM Hunt List CFNA via CUBE not working

[Brian Meade]

Can you grab "debug ccsip messages" from the CUBE for an example call?

On Tue, Oct 4, 2016 at 8:37 PM, Dana Tong  wrote:

> Hi all,
>
>
>
> I have an issue with my CUBE which I can’t seem to resolve.
>
> External calls to a CUCM Hunt List with CFNA to an external mobile are
> failing. The call is presented to the mobile, I answer the call, but the
> call “keeps ringing” on the originating phone.
>
> I’m sure it’s something obvious but I’m missing something.
>
>
>
> As a side note, the following scenario’s are working.
>
> External call, CFA to mobile works
>
> External call, CFNA to mobile works
>
> Single-Number-Reach (aka Mobility) works.
>
>
>
> It’s just the CFNA from external phone to Hunt List that appears to fail.
> I believe an internal IP phone calling the hunt list will fail over to
> mobile OK.
>
>
>
> Cheers
>
> Dana
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[Ashwani Ranpise]

Asim,

Have you looked at this post?

https://supportforums.cisco.com/discussion/10986976/new-ata-gets-rejected-callmanager

Regards,
Ashwani

On Wed, Oct 5, 2016 at 9:15 AM, Lisa Notarianni <
lisa.notaria...@scranton.edu> wrote:

> I have had this issue but the network configuration did not allow it to
> register or the device type is different than what you are actually trying
> to configure.  It is a ATA 186 correct?
>
>
>
> [image: Lisa Notarianni White Logo Business Card]
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] *On Behalf
> Of *Asim Mekki Basheer
> *Sent:* Wednesday, October 05, 2016 9:13 AM
> *To:* Ashwani Ranpise ; cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] Cisco ATA 186
>
>
>
>
>
> please see the attached still showed rejected even after assigned The DN
>
>
>
> Thanks
>
>
>
> ASIM
> --
>
> *From:* Ashwani Ranpise 
> *Sent:* Wednesday, October 5, 2016 5:55 AM
> *To:* Asim Mekki Basheer
> *Subject:* Re: [cisco-voip] Cisco ATA 186
>
>
>
> Asim,
>
> I dont see any DN has been assigned.  Assign the DN to your ATA-186 device
> and it will work.
>
> Thanks,
>
> Ashwani
>
>
>
> On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
> wrote:
>
> Hello Everyone
>
>
>
> we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected
> in the call manager we make factory reset the same  issue
>
>
>
> Regards
>
>
>
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Applie i)S 11.7.1 stops after iOS upgrade?

[Wes Sisk (wsisk)]

https://help.webex.com/docs/DOC-10317

?

-w

On Oct 4, 2016, at 3:14 PM, Jason Aarons (AM)  
wrote:



Has anyone received any cases where Cisco Jabber version11.7.1 stops working 
after upgrading their iPhone or iPad  iOS from version 9 to 10? Or any other 
Apple related cases?


Jason Aarons, CCIEx2 No 38564
Consultant
Dimension Data
904-338-3245 mobile

Planned PTO:
Oct 7 - Oct 17






This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer;
 ___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[James Buchanan]

According to the Device Defaults in CUCM, what is the default firmware
version for the ATA 186?

On Wed, Oct 5, 2016 at 9:22 AM, Asim Mekki Basheer 
wrote:

>
> Yes its ATA 186
>
> --
> *From:* Lisa Notarianni 
> *Sent:* Wednesday, October 5, 2016 6:15 AM
> *To:* Asim Mekki Basheer; Ashwani Ranpise; cisco-voip@puck.nether.net
> *Subject:* RE: [cisco-voip] Cisco ATA 186
>
>
> I have had this issue but the network configuration did not allow it to
> register or the device type is different than what you are actually trying
> to configure.  It is a ATA 186 correct?
>
>
>
> [image: Lisa Notarianni White Logo Business Card]
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] *On Behalf
> Of *Asim Mekki Basheer
> *Sent:* Wednesday, October 05, 2016 9:13 AM
> *To:* Ashwani Ranpise ; cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] Cisco ATA 186
>
>
>
>
>
> please see the attached still showed rejected even after assigned The DN
>
>
>
> Thanks
>
>
>
> ASIM
> --
>
> *From:* Ashwani Ranpise 
> *Sent:* Wednesday, October 5, 2016 5:55 AM
> *To:* Asim Mekki Basheer
> *Subject:* Re: [cisco-voip] Cisco ATA 186
>
>
>
> Asim,
>
> I dont see any DN has been assigned.  Assign the DN to your ATA-186 device
> and it will work.
>
> Thanks,
>
> Ashwani
>
>
>
> On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
> wrote:
>
> Hello Everyone
>
>
>
> we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected
> in the call manager we make factory reset the same  issue
>
>
>
> Regards
>
>
>
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[Asim Mekki Basheer]

Yes its ATA 186


From: Lisa Notarianni 
Sent: Wednesday, October 5, 2016 6:15 AM
To: Asim Mekki Basheer; Ashwani Ranpise; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Cisco ATA 186


I have had this issue but the network configuration did not allow it to 
register or the device type is different than what you are actually trying to 
configure.  It is a ATA 186 correct?



[Lisa Notarianni White Logo Business Card]



From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Asim 
Mekki Basheer
Sent: Wednesday, October 05, 2016 9:13 AM
To: Ashwani Ranpise ; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186





please see the attached still showed rejected even after assigned The DN



Thanks



ASIM



From: Ashwani Ranpise >
Sent: Wednesday, October 5, 2016 5:55 AM
To: Asim Mekki Basheer
Subject: Re: [cisco-voip] Cisco ATA 186



Asim,

I dont see any DN has been assigned.  Assign the DN to your ATA-186 device and 
it will work.

Thanks,

Ashwani



On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
> wrote:

Hello Everyone



we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in 
the call manager we make factory reset the same  issue



Regards





___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[Asim Mekki Basheer]

please find the version in the attached


Thanks

ASIm


From: James Buchanan 
Sent: Wednesday, October 5, 2016 6:16 AM
To: Asim Mekki Basheer
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186

Hello,


Browse to the IP address of the ATA and send the firmware version. I remember 
having to upgrade beyond the 1.03 firmware version years ago in order to get 
these to work again.

Thanks,

James

On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
> wrote:

Hello Everyone


we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in 
the call manager we make factory reset the same  issue


Regards



___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[James Buchanan]

Hello,


Browse to the IP address of the ATA and send the firmware version. I
remember having to upgrade beyond the 1.03 firmware version years ago in
order to get these to work again.

Thanks,

James

On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
wrote:

> Hello Everyone
>
>
> we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected
> in the call manager we make factory reset the same  issue
>
>
> Regards
>
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[Lisa Notarianni]

I have had this issue but the network configuration did not allow it to 
register or the device type is different than what you are actually trying to 
configure.  It is a ATA 186 correct?

[Lisa Notarianni White Logo Business Card]

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Asim 
Mekki Basheer
Sent: Wednesday, October 05, 2016 9:13 AM
To: Ashwani Ranpise ; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA 186



please see the attached still showed rejected even after assigned The DN

Thanks

ASIM

From: Ashwani Ranpise >
Sent: Wednesday, October 5, 2016 5:55 AM
To: Asim Mekki Basheer
Subject: Re: [cisco-voip] Cisco ATA 186

Asim,
I dont see any DN has been assigned.  Assign the DN to your ATA-186 device and 
it will work.
Thanks,
Ashwani

On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
> wrote:

Hello Everyone



we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in 
the call manager we make factory reset the same  issue



Regards





___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco ATA 186

[Asim Mekki Basheer]

please see the attached still showed rejected even after assigned The DN

Thanks

ASIM


From: Ashwani Ranpise 
Sent: Wednesday, October 5, 2016 5:55 AM
To: Asim Mekki Basheer
Subject: Re: [cisco-voip] Cisco ATA 186

Asim,

I dont see any DN has been assigned.  Assign the DN to your ATA-186 device and 
it will work.

Thanks,
Ashwani

On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer 
> wrote:

Hello Everyone


we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in 
the call manager we make factory reset the same  issue


Regards



___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] Cisco ATA 186

[Asim Mekki Basheer]

Hello Everyone


we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in 
the call manager we make factory reset the same  issue


Regards


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] ISR 4431 - Need to configure "clock source internal" on PRI interface , get error

[Russell Chaseling]

Cheers Ryan,

In the mean time I got the Nortel to change to Master which has resolved my 
issue.

But just so I'm clear for the future. The E1 module I have is a NIM-2MF-T1E1-E1 
and to only be used for voice. Am I right in saying the 4331 can never be 
master in this scenario?

From: Ryan Huff [mailto:ryanh...@outlook.com]
Sent: 05 October 2016 12:07
To: Russell Chaseling 
Cc: Brian V ; NateCCIE ; 
cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] ISR 4431 - Need to configure "clock source internal" 
on PRI interface , get error

Check out step 7 under the, "configuring the t1/e1 network interface module for 
data support" at 
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/4gen-t1-e1-nim-guide.html#con_1128175

"clock source {internal | line [primary | secondary] | network}



Specifies the clock source. The options are as follows:
* internal-Sets the controller framer as the clock master.

The clock source internal command is only applicable with the channel-group 
command and the pri-group(for data) command.
Note

The pri-groupcommand is supported on the NIM-xCE1T1-PRI for data without the 
keyword voice-dsp."

Hope this helps,

-Ryan

On Oct 5, 2016, at 6:49 AM, Russell Chaseling 
> wrote:
Hi Ryan,

I take it channel-group for data only? Sorry never used it before

Thx

From: Ryan Huff [mailto:ryanh...@outlook.com]
Sent: 05 October 2016 11:45
To: Russell Chaseling >
Cc: Brian V >; NateCCIE 
>; 
cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] ISR 4431 - Need to configure "clock source internal" 
on PRI interface , get error

Russell,

If you are trying to setup a B2B, you have to use the channel-group command 
instead of pri-group.

Clock source internal is only supported when using channel-group.


Sent from my iPhone

On Oct 5, 2016, at 6:24 AM, Russell Chaseling 
> wrote:
Hi,

Did you ever get to the bottom of this?

I'm having same issue trying to be the Master on a 4331 integrating with a 
Nortel Cs1000

Thanks
Russell

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Brian 
V
Sent: 28 October 2015 01:46
To: NateCCIE >
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] ISR 4431 - Need to configure "clock source internal" 
on PRI interface , get error

I've opened a TAC case on it.  I'll report back what I find out.

On Tue, Oct 27, 2015 at 8:43 PM, NateCCIE 
> wrote:
Ryan,

This doc and sample config seems to only show how to do normal user side & 
network clocking.

When doing network side isdn to a pbx, you have to provide them the clock, I 
like Brian have not figured out that part of the 4K voodoo.

Sent from my iPhone

On Oct 27, 2015, at 7:23 PM, Ryan Huff 
> wrote:
Brian,

You'll essentially be doing the same thing as you would have in the ISRG2 but 
as you've discovered, the syntax has changed a bit in the 4k's. I've included 
the relevant portion of a t1 config on a 4k in my lab below. Here is the link 
for 4th gen NIM t1 configurations (I'd suggest a good read here, a lot of 
syntax has changed that might leave you scratching your head): 
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html





Hope This Helps,



Ryan



|- CONFIG SAMPLE -|



card type t1 0 2
!
isdn switch-type primary-ni
!
network-clock synchronization automatic
network-clock synchronization participate 0/2
!
voice-card 0/2
dsp services dspfarm
!
controller T1 0/2/0
framing esf
linecode b8zs
!

clock source line primary

network-clock input-source 1 controller t1 0/2/0
cablelength long 0db
pri-group timeslots 1-24 voice-dsp
!
interface Serial0/2/0:23
encapsulation hdlc
isdn switch-type primary-ni
no cdp enable

!



|- CONFIG SAMPLE -|


From: cisco-voip 
> 
on behalf of Brian V >
Sent: Tuesday, October 27, 2015 8:42 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] ISR 4431 - Need to configure "clock source internal" on 
PRI interface , get error


I have a ISR 4331 that I'm configuring for voice PRI support.

Performing an integration with a Nortel PBX (back to back PRI) where i need to 
be the clock source on the underlying T1 circuit.



In the past on ISR G2 platforms (like a 2921),  I could configure "clock source 

Re: [cisco-voip] ISR 4431 - Need to configure "clock source internal" on PRI interface , get error

[Ryan Huff]

Russell,

If you are trying to setup a B2B, you have to use the channel-group command 
instead of pri-group.

Clock source internal is only supported when using channel-group.



Sent from my iPhone

On Oct 5, 2016, at 6:24 AM, Russell Chaseling 
> wrote:

Hi,

Did you ever get to the bottom of this?

I'm having same issue trying to be the Master on a 4331 integrating with a 
Nortel Cs1000

Thanks
Russell

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Brian 
V
Sent: 28 October 2015 01:46
To: NateCCIE >
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] ISR 4431 - Need to configure "clock source internal" 
on PRI interface , get error

I've opened a TAC case on it.  I'll report back what I find out.

On Tue, Oct 27, 2015 at 8:43 PM, NateCCIE 
> wrote:
Ryan,

This doc and sample config seems to only show how to do normal user side & 
network clocking.

When doing network side isdn to a pbx, you have to provide them the clock, I 
like Brian have not figured out that part of the 4K voodoo.

Sent from my iPhone

On Oct 27, 2015, at 7:23 PM, Ryan Huff 
> wrote:
Brian,

You'll essentially be doing the same thing as you would have in the ISRG2 but 
as you've discovered, the syntax has changed a bit in the 4k's. I've included 
the relevant portion of a t1 config on a 4k in my lab below. Here is the link 
for 4th gen NIM t1 configurations (I'd suggest a good read here, a lot of 
syntax has changed that might leave you scratching your head): 
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/ConfT1E1NIM.html





Hope This Helps,



Ryan



|- CONFIG SAMPLE -|



card type t1 0 2
!
isdn switch-type primary-ni
!
network-clock synchronization automatic
network-clock synchronization participate 0/2
!
voice-card 0/2
dsp services dspfarm
!
controller T1 0/2/0
framing esf
linecode b8zs
!

clock source line primary

network-clock input-source 1 controller t1 0/2/0
cablelength long 0db
pri-group timeslots 1-24 voice-dsp
!
interface Serial0/2/0:23
encapsulation hdlc
isdn switch-type primary-ni
no cdp enable

!



|- CONFIG SAMPLE -|


From: cisco-voip 
> 
on behalf of Brian V >
Sent: Tuesday, October 27, 2015 8:42 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] ISR 4431 - Need to configure "clock source internal" on 
PRI interface , get error


I have a ISR 4331 that I'm configuring for voice PRI support.

Performing an integration with a Nortel PBX (back to back PRI) where i need to 
be the clock source on the underlying T1 circuit.



In the past on ISR G2 platforms (like a 2921),  I could configure "clock source 
internal" under the controller T1 interface.  On the 4331 I get the following 
error when the clock source it set to internal under the controller T1



TIV-4331-01-TEMP(config-controller)#pri-group timeslots 1-24

%Cannot create ds0/tdm/pri-group with clock source internal

%pri-group voice-dsp cannot be created under the clock source configuration



How do I accomplish the same on this newer platform or is it no longer possible 
?



The NIM does have it's own DSP resources.

I can get the integration up and working, with the default "clock source line", 
 but I  get slips on the t1 as the Nortel side is free running  and looking to 
the line as a clock source on its end.



I hope I'm just missing something obvious.

Thanks




___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip