Use 9.011![0-9#]
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Brian
Meade
Sent: Friday, February 13, 2015 4:57 PM
To: Ryan Huff
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Strange routing behavior cucm 10.5 and int'l pattern
If your route pattern
Why do we include a # for international?
On 14/02/2015 8:06 AM, Brian Meade bmead...@vt.edu wrote:
If your route pattern is 9.011!#, users have to dial the # at the end to
match and your discard should be pre-dot trailing hash. Usually you'll
have 2 RPs for international (9.011! and 9.011!#).
Use 9.011![0-9#] and pre-dot trailing pound if you want a single route pattern.
On Feb 13, 2015, at 3:56 PM, Brian Meade
bmead...@vt.edumailto:bmead...@vt.edu wrote:
If your route pattern is 9.011!#, users have to dial the # at the end to match
and your discard should be pre-dot trailing hash.
If your route pattern is 9.011!#, users have to dial the # at the end to
match and your discard should be pre-dot trailing hash. Usually you'll
have 2 RPs for international (9.011! and 9.011!#).
On Fri, Feb 13, 2015 at 3:29 PM, Ryan Huff ryanh...@outlook.com wrote:
Try this one on;
Was
Andrew,
Since international numbers are varying lengths, the # is used to signal the
end of the number string.
You can also just wait for the interdigit timeout to expire and then routing
occurs.
Usually as Brian mentioned, both are supported because it usually comes down to
a user
Brian,
I agree with you on the trailing hash requirement. DNA will not make a
match for you unless you typed the hash at the end.
[image: Inline image 1]
[image: Inline image 2]
Also, the PreDot/Trailing # is only needed for Translation Patterns. Route
Patterns strip the trailing hash
Brian,
I suppose I wasn't clear on that. The octothorpe was dialed at the end of the
international pattern in production and with DNA.
Only when I removed the octothorpe from the pattern did routing occur.
Thanks,
Ryan Huff___
cisco-voip mailing
Andrew,
It's an special indication from the user to the phone system that they have
finished dialing the digits. Otherwise, the T.302 timer will have to
expire before the call will be routed.
An analogy would be like saying over on a walkie talkie.
On Fri, Feb 13, 2015 at 5:24 PM, Andrew Grech
