Re: [cisco-voip] Transcoding question

2015-03-16 Thread Daniel Pagan
For clarity, by “higher bandwidth codec” I meant to say higher bit-rate codec, 
or codec of higher bandwidth consumption.

- Dan

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Daniel Pagan
Sent: Monday, March 16, 2015 9:08 PM
To: Ryan Huff; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Transcoding question

Hey Ryan how’s it going? Transcoder allocated by CUCM comes from the side using 
a higher bandwidth codec, regardless if it’s the calling or called party, with 
the intention to avoid streaming a high bandwidth consuming codec over a WAN 
connection – keeping it local to the LAN. Of course, this isn’t always true, 
such as due to a local transcoding resource being entirely nonexistent or a 
misconfiguration of the MRG/MRGLs.

Hope this helps answer your question.

- Dan

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Ryan 
Huff
Sent: Monday, March 16, 2015 8:11 PM
To: cisco-voip@puck.nether.netmailto:cisco-voip@puck.nether.net
Subject: [cisco-voip] Transcoding question


When xcoding is required in the call setup, which side is transcoded? The 
called party or the calling party?

Thanks
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


Re: [cisco-voip] Transcoding question

2015-03-16 Thread Daniel Pagan
Hey Ryan how’s it going? Transcoder allocated by CUCM comes from the side using 
a higher bandwidth codec, regardless if it’s the calling or called party, with 
the intention to avoid streaming a high bandwidth consuming codec over a WAN 
connection – keeping it local to the LAN. Of course, this isn’t always true, 
such as due to a local transcoding resource being entirely nonexistent or a 
misconfiguration of the MRG/MRGLs.

Hope this helps answer your question.

- Dan

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Ryan 
Huff
Sent: Monday, March 16, 2015 8:11 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Transcoding question


When xcoding is required in the call setup, which side is transcoded? The 
called party or the calling party?

Thanks
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


Re: [cisco-voip] Transcoding question

2015-03-16 Thread Ryan Huff
Thanks Dainel! I probably knew that at some point,  but I couldn't remember for 
the life of me!  Makes total sense.

Thanks,

Ryan

 Original Message 
From: Daniel Pagan dpa...@fidelus.com
Sent: Monday, March 16, 2015 09:16 PM
To: Daniel Pagan dpa...@fidelus.com,Ryan Huff 
ryanh...@outlook.com,cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Transcoding question

For clarity, by “higher bandwidth codec” I meant to say higher bit-rate codec, 
or codec of higher bandwidth consumption.

- Dan

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Daniel Pagan
Sent: Monday, March 16, 2015 9:08 PM
To: Ryan Huff; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Transcoding question

Hey Ryan how’s it going? Transcoder allocated by CUCM comes from the side 
using a higher bandwidth codec, regardless if it’s the calling or called 
party, with the intention to avoid streaming a high bandwidth consuming codec 
over a WAN connection – keeping it local to the LAN. Of course, this isn’t 
always true, such as due to a local transcoding resource being entirely 
nonexistent or a misconfiguration of the MRG/MRGLs.

Hope this helps answer your question.

- Dan

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Ryan 
Huff
Sent: Monday, March 16, 2015 8:11 PM
To: cisco-voip@puck.nether.netmailto:cisco-voip@puck.nether.net
Subject: [cisco-voip] Transcoding question


When xcoding is required in the call setup, which side is transcoded? The 
called party or the calling party?

Thanks
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


[cisco-voip] Transcoding question

2015-03-16 Thread Ryan Huff
When xcoding is required in the call setup, which side is transcoded? The 
called party or the calling party?

Thanks___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip