Thanks.
The 404 is sourced from the gi1/0/1 interface IP address. If CUCM initiated the
404 I would expect CUCM’s IP address to be the source of the 404.
It seems like this is config as “sip on a stick” (a router with a single
interface used for inbound and outbound SIP traffic). A little more
While it's important to rest your SIP trunks, else they become cranky, it's
also important to reset them, sometimes more than once, to be sure it's
properly initialized with all of the current settings, etc.
I have wasted enough time in the past, just to see that it works after a
reset, that I
Naresh,
Any chance you could send a ccsip messages and a voice ccapi inout debug from a
failed inbound call?
Sent from my iPhone
On Apr 30, 2020, at 06:28, naresh rathore wrote:
hi
I tried both, via translation pattern or directly pointing a particular number
to phone but still the same
Have you been resting the trunk in cucm after each of your changes?
Sent from my iPhone
> On Apr 30, 2020, at 7:08 AM, naresh rathore wrote:
>
>
> hi
>
>
> Pls find the attached ccsip messages and cube config. i will send voice ccapi
> inout config tomorrow. outgoing call works fine but
Hello, Can you send your gateway configuration and a screenshot of your CUCM trunk configuration? That’d give us more to go off of. Thanks, James From: naresh rathoreSent: 30 April 2020 08:36To: cisco-voip@puck.nether.netSubject: [cisco-voip] sip 404 not found for incoming calls hi, i have
hi,
i have cucm version 12.0. outgoing call is working without any issue. but
incoming call is failing. the call request is received by cucm but its
responding with 404 not found. i checked CSS and also pointed call directly to
ip phone using significant digits and incoming css but still the
hi
I tried both, via translation pattern or directly pointing a particular number
to phone but still the same result.
Regards
From: Amit Kumar
Sent: Thursday, April 30, 2020 6:41 PM
To: naresh rathore
Cc: James B ; cisco-voip@puck.nether.net
Subject: Re:
What does the dialed number analyzer tool tell you?
Is there some digit manipulation going on ? You're not somehow using this
trunk/port for registrations ? Messaging inbound is using a domain or address
the UCM is going to respond to ?
Adam
From: cisco-voip On Behalf Of naresh
rathore