is any one doing this at their outreach locations, I have main SIP gateway
CUBE on main campus and PPP connection to the outreach locations. In the
event of LOS to mian campus I need SRST to kick in. Currently there is
confiuration for Skinny but I am moving them over to SIP soon.
--
Johnny Q
best way to go about adding sd to bulk group of phones?
we have phones in different device pools that we would like to add sd to,
what is best way to accomplish this?
--
Johnny Q
Voice Technology Analyst - TelNet
Chemeketa Community College
johnn...@chemeketa.edu
Building 22 Room 131
Work
Is there anyone actually using these?
http://www.cisco.com/c/en/us/products/collateral/routers/819-integrated-services-router-isr/datasheet_c78-732558.html
I am looking at trying 2 of these at our farthest outreaches for IT remote
access and possibly, depending on coverage some SIP SRST testing
attempting to review for a deployment ofr an outreach we have, I cam
accross this approach. has anyone ever done it this way. maybe not so much
for inbound dialing. more for emergency outbound calls is my emphasis.
https://www.youtube.com/watch?v=9svGCnjCk3g
--
Johnny Q
Voice Technology
does anyone have any insight on where to adjust how far back to report on.
I get a limit when I try a report older than a month. We should be able to
go back for a year? right. if this is a setting for how long to archive
call details, where do i change that?
--
Johnny Q
Voice Technology Analyst
we are finding that after our sip cutover, that our faxes are happiest
signalling over a T1 connection that originally we were trying to get away
from, however trouble shooting was terrible and we are moving past having
all voice traffic on the SIP trunk.
Currently we are signalling for voice(
Hola all, I have a single cluster of CUCM 10.5(2) that I would like to look
at adding the presence component. focus on the jabber client and the
fiinesse bit of call control similar to that of the uccx call control
groups.
where could I find the best how to and configuration, best practice sort
-peer level second.
>
> Sent from my iPhone
>
> On May 8, 2018, at 12:17, Jonatan Quezada <jonatan.quez...@chemeketa.edu>
> wrote:
>
> we are finding that after our sip cutover, that our faxes are happiest
> signalling over a T1 connection that originally we were try
I totally have to get this right, I dont see my exact version here?[image:
Inline image 2]
[image: Inline image 1]
[image: Inline image 3]
--
Johnny Q
Voice Technology Analyst - TelNet
Chemeketa Community College
johnn...@chemeketa.edu
Building 22 Room 131
Work 5033995294
Mobile 9712182110
arrier issue than our side, and we
> pump out way more faxes in a day than most companies.
>
>
>
> Ben Amick
>
> Unified Communications Analyst
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] *On Behalf
> Of *'Jonatan Quezada'
> *Sent:* T
gt;> is routing happening correctly...to some degree.
>>
>> If you go to the web page of the phone and click on stream 1, does the
>> far end IP address match your CUBE address?
>>
>> Also, there's a lot of settings that need to be considered when
>> implementing SIP, such
and if so, do I need to modify this portiopn of my cube configuration?,
This guy seems to describe what I am seeing on our main campus
https://supportforums.cisco.com/t5/video-over-ip/sip-
trunk-call-hold-fails-no-audio-no-resume-no-sdp-from-cube/td-p/2214595
!!!
voice service
Does anyone else have this this setup, when one or the other is triggered
they will listen to each other to relay notifications?
application examples? i would love to see how this can be used boyond what
we have for our campus.
target application: weather notifactions, emergency response, evac,
g through a list or something
>>>
>>> Do you have “Run on all nodes” checked on the CUCM trunk? If so, please
>>> verify all CM nodes running the call manager service are in the CM Group
>>> specified in the device pool used by the CUCM.
>>>
>>> Are
ube) and set the TX
> rate of the device to 1400 baud.
>
> Sent from my iPhone
>
> On Mar 21, 2018, at 17:35, Jonatan Quezada <jonatan.quez...@chemeketa.edu>
> wrote:
>
> thank you all for th einsight, I do have MTP checked on trunk , and run
> on all CM nodes i
is anyone using the century Link configuration guide for the SIP IQ private
on a 4431, . I finally have calls 100 percent of the time but I had to do
MTP on the trunk for the CUCM
my call flow is very simple
centLiunk---IQ private Cube-CUCM,uccx,Unity,
trying like mad for fax pass
What would change this this packet 20 percent of the time? We are trouble
shooting the last ghost issue after SIP cutover. I was on the horn with
the provider and CiscoTAC and we see this for good and bad calls: any
reason why centuryLink's stuff would not recognize this update from us, or
Is there any one out there that is using google for their domain, but
running cucm, unity and an ESNA cloudlink relay? I see now that ESNA might
be part of avaya?
What are seeing people trying when they want to relay voicemail to email
boxes on google?
does cisco have a voicemail relay that can
equired ticked on the CUCM SIP trunk?
>
> In RTMT can you check your software MTP resources?
>
> On Fri, Jan 17, 2020 at 1:48 PM Jonatan Quezada <
> jonatan.quez...@chemeketa.edu> wrote:
>
>> UCCX version: 10.6.1.11003-29 (ES02-11)
>>
>&
Im totally looking to update all of mine I think we use digi-cert, pleasea
let us know what you find out :)
Cheers!
On Mon, Mar 30, 2020 at 11:43 AM Brian Meade wrote:
> Does anyone know of any public certificate authorities that have cheaper
> multi-server SAN certificate options? I had seen
Brian, How challenging was it to do the jabber on all three domains?
Where do you need the multiDomain cert, on the VCS-edge connector right? Im
looking to see what it would take to get this going for our remote workers
even though it seems
like there are few things to make sure are in place
Hola All, I think htis is the best spot as I see that others have serious
questions regarding the FLEX switch. Personally I really like the plus 20
devices extra if we needed to be over for whatever reason. I'm still not
sure if it will be best for us. We dont have anything super special other
Is this where we add the mac for CSF profile to the RMCM controlled
devices application user?
please confirm, I feel like we did this recently for my help desk users
also running a queue with finesse on my ccx
On Tue, Aug 25, 2020 at 2:29 PM James Dust
wrote:
> I have a number of users
totally speculating, but I feel it has to do with sending the request to
the cell carriers for the call to land on the cell?
I have seen where the cell carriers keep signaling efter the call was
picked up from the desk device or the CSF jabber. Its as if there is a
release or "stopp signalling"
24 matches
Mail list logo