Re: Stus-List 1980 C 30 MKI - DIY Lifelines

We replaced our life lines some years ago. What I remember is that it was not that hard. My wife says we got the parts from West Marine but I think we got them from somewhere else. In any case you need a good tool to cut the wire and a good tool for nicro pressing. And careful measuring. Dave.

Re: Stus-List Starting a complete refit on C Landfall 38 , first of many questions.

John, I forgot to mention that the davits are on my LF39 not the lf38.  Major difference in boat design. On Pegasus the Lf38 I carried the dinghy on the bow during long crossings. I did have a Garhauer motor crane for the out board. Plus I had the bimini built so I could put solar panels above

Re: Stus-List Starting a complete refit on C Landfall 38 , first of many questions.

Thanks Doug > On Sep 3, 2017, at 11:26 PM, svpegasus38 via CnC-List > wrote: > > I have Davis that came with the boat. They are free standing (not connected > to stern pulpit). Not thrilled with the design. > > For a generator I use a Honda 2000 companion. It has a 30

Re: Stus-List Starting a complete refit on C Landfall 38 , first of many questions.

I have Davis that came with the boat. They are free standing (not connected to stern pulpit). Not thrilled with the design.  For a generator I use a Honda 2000 companion. It has a 30 amp plug.  Getting ready to get quotes on a full enclosure for the cockpit. I know several cruisers in the

Re: Stus-List Whereabouts???

Google Maps  | || Google Maps | | | Don Don HarbenViking 34Lifewww.ncyc.ca ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to:

Re: Stus-List Whereabouts???

maps.apple.com/?ll=46.134699,-82.624448=46.134699,-82.624448 Don Don HarbenViking 34Lifewww.ncyc.ca | | | | || | | | | | NCYC Visit the post for more. | | | | On Sunday, September 3, 2017, 4:46 PM, Kevin Paxton via CnC-List

Stus-List Starting a complete refit on C Landfall 38 , first of many questions.

Does anyone have a water maker on their boat? How about a Gen Set? Full enclosure for the cockpit? Davits? If you do have any of the above or have thoughts on them, can you please share. Also include brand , (AC or DC for water maker). Can you also share pictures of where on boat its

Re: Stus-List Sherwood pump oil seal

The outer diameter is a press fit into the deal bore. The green coating on the deal is a dealer of sorts. Take a socket kusing the closed end]or a seal installer tool and drive the deal into the clean bore. Make sure it is oriented in the proper direction.  The seal lip should be facing the

Re: Stus-List Small boat GPS with depth

Hi Mark I can't offer advice on what electronics to buy, but can on enlarging the hole. I'd rather spend an hour poking myself in the eye with a pencil than trying to enlarge the hole with a dremel... You will want a set of hole saws for this, and if you have both a 2" and a 2.25" hole saw

Stus-List Transmission ratio for LF38

Unfortunately our ZF 15 MIV transmission needs replacement. The current gearbox has a 2.13:1 gear ration and I believe the gearbox has been replaced in the past. The owners manual for the LF38 says the ration should be 2.83:1. Our prop is a two blade 16" x 13" x 1-1/8" RH which more closely

Re: Stus-List Whereabouts???

Doing an overnight at broad creek off the magothy tonight with the whole family. First time for us. Should be exciting! Kevin C 34 Cornfield creek, Pasadena, MD On Sun, Sep 3, 2017, 2:57 PM Eric Frank via CnC-List wrote: > David, > Planning to sail from Mattapoisett to

Re: Stus-List Whereabouts???

David, Planning to sail from Mattapoisett to Point Judith on Thursday, then on to Greenport on Friday. A bit worried about the weather, bur we will see. Eric Frank Cat's Paw C 35 Mk II > On Sep 3, 2017, at 12:00 PM, cnc-list-requ...@cnc-list.com wrote: > > Original message

Stus-List Small boat GPS with depth

I have the bottom of my 25 Mk1 down to bare gelcoat. I figured now is a good time to replace all the thru hulls including the old knotmeter and depth transducer. These have not been functional since I've owned the boat. I've gotten by with an old hand-held Garmin GPSmap 76. To be honest,

Stus-List Sherwood pump oil seal

Has anyone any experience replacing the oil seal at the back of the Sherwood raw water pump? I have the replacement oil seal part number 18806, cost 20.82, it has a green outer casing and looks like it should slide right into the end of the pump body that faces the engine, however that bore seems

Re: Stus-List Whereabouts???

Rainy and breezy in Edgartown now from Harv. Should stop by noon after Iake a big breakfast for us all. Sent from my Verizon 4G LTE smartphone Original message From: coltrek via CnC-List Date: 9/1/17 5:16 PM (GMT-05:00) To: cnc-list@cnc-list.com