Re: Stus-List 2018 Mid-Atlantic C Rendezvous

I was thinking more along the lines of the Mid-Atlantic states. But you're absolutely right and if you want to petition for a rendezvous in the middle of the Atlantic then be my guest. You just have to fill out the survey. Just be warned you might be meeting up with yourself... On Wed, Sep

Stus-List Fwd: Mast Gooseneck fitting

Al Try these guys http://www.rigrite.com/Spars/SparParts/Gooseneck_toggles.php Tom Buscaglia S/V Alera 1990 C 37+/40 Vashon WA P 206.463.9200 C 305.409.3660 Begin forwarded message: > From: Tom Buscaglia > Date: September 13, 2017 at 8:28:47 PM PDT > To:

Stus-List Mast Gooseneck fitting

I had a similar issue on my prior boat, a 35 Mk I, and was able to get find a replacement. Just not sure where. But it was not too expensive. I'll see what I can find. Tom Buscaglia S/V Alera 1990 C 37+/40 Vashon WA P 206.463.9200 C 305.409.3660 > On Sep 13, 2017, at 4:05 PM,

Re: Stus-List 2018 Mid-Atlantic C Rendezvous

Are we talking somewhere between Bermuda and Azores or maybe Cape Verde (almost midway between North and South Atlantic) ? Or I could take the survey... Cheers, Russ Sweet 35 mk-1 At 06:17 PM 13/09/2017, you wrote: Respond to the survey Jim!Â

Re: Stus-List Depth Sounder

I'm looking for a new (used) display. I tried a new transducer, and that didn't cure the problem. I also checked all wiring from the transducer to the display. Alan On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List < cnc-list@cnc-list.com> wrote: > Alan, > > What exactly are you

Re: Stus-List Depth Sounder

Alan, What exactly are you looking for? The thru-hull depth sounder? Display? Something else? Best, Dave Godwin 1982 C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit > On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List

Stus-List Depth Sounder

Does anyone have a Depth sounder they want to sell or give away? I'm looking for a Raymarine ST50, ST60 or ST60+ -- Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR ___ This list is supported by the generous donations of our members. If you

Re: Stus-List 2018 Mid-Atlantic C Rendezvous

Gary, I know you are down for a Chesapeake Bay rendezvous... Respond to the survey! https://www.surveymonkey.com/r/MFT2GLY Thanks, Josh On Wed, Sep 13, 2017, 7:50 PM Gary Nylander via CnC-List < cnc-list@cnc-list.com> wrote: > I can look into the same at Miles River Yacht Club. > > Gary > >

Re: Stus-List 2018 Mid-Atlantic C Rendezvous

Respond to the survey Jim! https://www.surveymonkey.com/r/MFT2GLY Thanks, Josh On Wed, Sep 13, 2017, 7:47 PM detroito91 via CnC-List wrote: > Washington nc > Jim > 38 lf > SEA YA! > Washington nc > > > > Sent from my T-Mobile 4G LTE Device > > Original

Re: Stus-List Mast Gooseneck Fitting

When the cast aluminum fitting on the gooseneck of my 38 broke during a gybe (I was letting the inexperienced but eager daughter of a crewmember steer after an offshore race) I took the old fitting off and had a local machine shop make a replacement. They bent and welded some stainless plate,

Re: Stus-List Mast Gooseneck Fitting

Here is what you need... price may have gone up, or my memory is a bit off. http://southshoreyachts.com/shop/cc-stainless-mast-bracket/ Chuck B C 34 Elusive Somerset, MA ___ This list is supported by the generous donations of our members. If you wish

Re: Stus-List Mast Gooseneck Fitting

I broke the the cast aluminum fitting on my mast at the gooseneck as well. South Shore Yachts had a stainless replacement for about $275 USD (if I recall correctly) and it shipped pretty quickly. The way to go, for sure! Chuck B C 34 Elusive Somerset, MA On Wed, Sep 13, 2017 at 8:39 PM,

Re: Stus-List Mast Gooseneck Fitting

Call South Shore Yachts in Niagara-on-the-Lake before fabricating. They may have one. From: Dennis C. via CnC-List Sent: Wednesday, September 13, 2017 8:29 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Mast Gooseneck Fitting You should be able to remove it yourself. If it's on with

Re: Stus-List Mast Gooseneck Fitting

You should be able to remove it yourself. If it's on with machine screws, try one of these: http://www.northerntool.com/shop/tools/product_36882_36882 It's what I use to remove things from masts. If it's riveted, drill out the rivet head then drive the rest into the mast with a punch. Once

Re: Stus-List Mast Gooseneck Fitting

Take off old and send to Garhauer...They made me a new one out of stainless...WAY cheaper than 1100but I can't remember exactly.. several hundred. Bill Walker CnC 36 Sent from AOL Mobile Mail On Wednesday, September 13, 2017 Al Serrato via CnC-List wrote: The

Re: Stus-List 2018 Mid-Atlantic C Rendezvous

I can look into the same at Miles River Yacht Club. Gary From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Wednesday, September 13, 2017 3:07 PM To: cnc-list@cnc-list.com Cc: Della Barba, Joe Subject: Re:

Re: Stus-List 2018 Mid-Atlantic C Rendezvous

Washington nc Jim38 lfSEA YA!Washington nc  Sent from my T-Mobile 4G LTE Device Original message From: "Della Barba, Joe via CnC-List" Date: 9/13/17 3:07 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: "Della Barba, Joe"

Re: Stus-List Mast Gooseneck Fitting

Try garhauer, we had them fabricate a gooseneck for perception years ago. Talk to Guido. Get Outlook for iOS From: CnC-List on behalf of Al Serrato via CnC-List Sent: Wednesday,

Re: Stus-List Mast Gooseneck Fitting

South Shore may actually have one. Several years ago, I broke the opposite part on the boom. Southshore had a brand new casting out in the shed. Took him a couple of days before he had a chance to dig it out and ship it. It had not even had any machining done on it. It still needed to be

Stus-List Mast Gooseneck Fitting

The metal gooseneck fitting on the mast of my '34 failed. It attaches to the mast via 4 screws on each side. One of the two metal loops that accepts the boom end broke off. I have only gotten one estimate so far based on the photo I sent to my usual boatyard, of $1100, to remove, fabricate and

Re: Stus-List 2018 Mid-Atlantic C Rendezvous

I can get a spot at CRYC if needed. (Corsica River Yacht Club) Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Wednesday, September 13, 2017 2:44 PM To: cnc-list@cnc-list.com Cc: Josh Muckley Subject: Re:

Stus-List CRYC crab feast Sept 24 Corsica River Maryland

https://www.regattanetwork.com/clubmgmt/applet_registration_form.php?regatta_id=15481 Last time we did this the crabs were awesome! Sign up and eat ☺ Joe Coquina C 35 MK I ___ This list is supported by the generous donations of our members. If you

Re: Stus-List Alternator Belts

I thought I would include these links as some interesting reading on the topic: http://www.pbase.com/mainecruising/automotive_alternators_vs_deep_cycle_batteries http://www.pbase.com/mainecruising/alternator_conversion http://www.pbase.com/mainecruising/electromaax_kit I think it is worth

Re: Stus-List Deal on starter from Mastry

My Perkins is configured this way, as well. The glow plugs are activated by the ignition key (what would normally be considered “starter” position and the starter is a separate button. But the starter is interlocked with the glow plugs. So it seems that this interlock is common enough. Marek