Re: Stus-List Sanitation hose and Y valves

Joel, You may want to have a look at these two articles: https://cdn.shopify.com/s/files/1/0419/9489/files/PS1312_War_Against_Head_Odors_2_reprint1404_web.pdf (why it shows up as Shopify, I have no clue, but it is a Practical Sailor’s review of sanitation hoses and it is a PDF, so you can keep

Re: Stus-List Sanitation hose and Y valves

A heat gun and some liquid soap will help with getting the hoses on.  Danny Sent from my T-Mobile 4G LTE Device Original message From: Joel Aronson via CnC-List Date: 11/6/17 7:51 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Joel Aronson

Re: Stus-List Sanitation hose and Y valves

Glad I asked! I’ll defer to the collective wisdom and go with the 101/102. I’ll borrow a small angle grinder to speed the process. This is not a job I want to repeat! The Raritan valve is worth a look too. Joel On Mon, Nov 6, 2017 at 6:37 PM Tom Buscaglia via CnC-List < cnc-list@cnc-list.com>

Stus-List Sanitation hose with wire

Several of the hoses on my boat that are wired, I know because I either put them there in the first place and/or replaced them, e.g. sanitation, exhaust, scupper, etc.no hard or 90 deg. angle to try to attach.like Paul E. cut with a hack saw, trim if necessary.I was led to

Stus-List Sanitation hose and Y valves

We replaced the Y Valve on Alera this year. Went for the Raritan Tru-Desoign Manual Aquavalve https://www.fisheriessupply.com/raritan-tru-design-manual-aquavalve-y-valve-td90314w Love it. Solid, positive and smoooth! Our old Bosworth Y-Valve was shitty ;)

Re: Stus-List Raymarine instrument covers

Bruce, I have one or two of these which I no longer need. Send me your address off list, and I?ll send them to you. - Paul E. 1981 C 38 Landfall S/V Johanna Rose Fort Walton Beach, FL http://svjohannarose.blogspot.com/ > On Nov 6, 2017, at 5:17 PM, cnc-list-requ...@cnc-list.com >

Re: Stus-List CnC-List Digest, Vol 142, Issue 21

Bruce, I have one or two of these which I no longer need. Send me your address off list, and I’ll send them to you. - Paul E. 1981 C 38 Landfall S/V Johanna Rose Fort Walton Beach, FL http://svjohannarose.blogspot.com/ > On Nov 6, 2017, at 5:17 PM, cnc-list-requ...@cnc-list.com wrote: > >

Re: Stus-List Sanitation hose with wire

I never had a problem with wired hose. I use a hack saw to cut and then clip the wire back so there is no exposure. In addition to 101 sanitation hose, I use the wired 250 hose for the exhaust line before and after the lift muffler, and I also use 250 hose for main scuppers which have below

Re: Stus-List Raymarine instrument covers

The covers on my Nexus instruments loosened with time. I just put some duct tape around the inside to make them fit tighter. Has worked for 10+ years. Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Nov 6, 2017 at 4:06 PM, Bruce Whitmore via CnC-List < cnc-list@cnc-list.com> wrote: > Hello

Stus-List Bosworth Y-valve

Last season, I replaced my Bosworth Y-valve with the same model. The handle broke off in my hand. It was my fault - lack of lubrication. I spoke directly with someone at Bosworth, but can't recall her name. She was very helpful in making sure I got the correct valve. I think I emailed pics

Re: Stus-List Sanitation hose and Y valves

Joel, I have to agree with Danny. Trident 101 (or the white 102) is a much better hose that Trident 140. I have worked with both and honestly I think working with the white PVC sanitation hoses (i.e. 140) is a much great pain in the ass. As for Y-valves, I have been real happy with the

Re: Stus-List Raymarine instrument covers

If your instruments are bulkhead mounted, Sew a piece of Sunbrella and mount it to the bulkhead with snaps or other fittings so that it covers all of the instruments. No need for individual covers. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Mon, Nov 6, 2017 at 2:06 PM, Bruce

Stus-List Raymarine instrument covers

Hello all,  We got to the boat over the weekend and found one of the small square instrument covers for our Raymarine instruments (ST60+, etc.) had evidently got blown off.  One was gone, another was loose.  These things are $20+ shipping.  Pretty stupidly priced for a piece of plastic

Re: Stus-List Sanitation hose and Y valves

Danny, PIA to cut and the exposed end rusts. Joel On Mon, Nov 6, 2017 at 4:16 PM, Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > Joel, > > I'm no help on the valve, I just reused the one that was there. Any > reason you're against the wire in the hose, just curious? > > Danny >

Re: Stus-List Sanitation hose and Y valves

Joel, I'm no help on the valve, I just reused the one that was there. Any reason you're against the wire in the hose, just curious? Danny On 11/6/2017 4:13 PM, Joel Aronson via CnC-List wrote: Danny, With all due respect to Peggy, I don't like wire reinforced hoses.  Any thoughts on the

Re: Stus-List Sanitation hose and Y valves

Danny, With all due respect to Peggy, I don't like wire reinforced hoses. Any thoughts on the y valve? Joel On Mon, Nov 6, 2017 at 4:03 PM, Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > trident 101 and 102 is what Peggie Hall recommends and what I used. > Although I did use 148

Re: Stus-List Sanitation hose and Y valves

trident 101 and 102 is what Peggie Hall recommends and what I used.  Although I did use 148 for the vents Danny On 11/6/2017 1:59 PM, Joel Aronson via CnC-List wrote: This winter I am going to replace the sanitation hose and Y valves in both heads. Amazon has a 50 foot roll of 140 series

Re: Stus-List AIS improvement + general rewiring

Joe and Joel, I have used ShipModul Miniplex2 for many years to send NMEA data from the chart plotter at the helm to MacENC to a Mac laptop using USB, but more recently using it to convert the NMEA to wifi so it can be sent to an iPad. I’ve been using iNavX on the iPad, but probably other

Re: Stus-List Sanitation hose and Y valves

There was a Practical Sailor evaluation of Y-valves a few years ago. From: Joel Aronson via CnC-List Sent: Monday, November 06, 2017 1:59 PM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Stus-List Sanitation hose and Y valves This winter I am going to replace the sanitation hose and Y

Stus-List Sanitation hose and Y valves

This winter I am going to replace the sanitation hose and Y valves in both heads. Amazon has a 50 foot roll of 140 series Trident hose for $150. Any reason this is the wrong hose? Anyone in Annapolis want to split a roll? (Beats 10/foot at the local stores) Looking for recommendations on a Y

Re: Stus-List AIS improvement + general rewiring

Hi I run Navionics on three Idevices. The software and the chart subscription share as one as long as they are all in the Apple Family Share. My Raymarine is a separate Navionics chart subscription. Tried directly with appeal to them... no The Raymarine MFD wifi iPad app puts the iPad in as

Re: Stus-List AIS improvement + general rewiring

That may have been SAR (search and rescue). — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI :^( > On Nov 6, 2017, at 10:02 AM, Della Barba, Joe via CnC-List > wrote: > > Speaking of which, there is at least one

Re: Stus-List AIS improvement + general rewiring

I just ordered this: https://www.ebay.com/itm/NMEA-0183-to-WiFi-BRIDGE-/182598371832 $37 or so US dollars shipped free from Australia. They have two NMEA channel versions too. I was tempted to stick the AIS in my car and drive over the Bay Bridge, it surely will get picked up 200 feet in the

Re: Stus-List AIS improvement + general rewiring

Joe, I bought a Bad Elf for my iPad mini original, worked fine (does with my mini 4 as well, but it also has a built in GPS receiver) with the navionics app and mapsme. The Navionics app works on both my iPhone and iPad – both are ties to the same apple account, so just 1 subscription so far,

Re: Stus-List AIS improvement + general rewiring

Joe, Look for yourself on Marine Traffic. Or let me know when the unit has been on for a while. Please let me know how the NMEA WiFi bridge works. Could be much simpler than what I am trying to do with Signal K and a router. Joel On Mon, Nov 6, 2017 at 10:39 AM, Della Barba, Joe via

Re: Stus-List Silicone residue...

Practical Sailor did a test on adhesive removers in the January 2017 issue. They recommend Re-Mov Silicone and Adhesive Remover. Below is a quote from the test results: Re-Mov Silicone and Adhesive Remover This remover was our most effective overall for removing both silicone caulk residue

Re: Stus-List AIS improvement + general rewiring

I have the AIS unit now. I wish I hadn’t been so quick to ship the old one, I would like to see it work and apparently I have no shore station in reach of my location at the dock. All the lights are good, the diagnostics are all good, and it says it is transmitting. I guess I have to get out

Re: Stus-List diesel additive

FYI - Biobor kills algae, which is good if you don’t have any yet. If you have it already and it is sticking to the tank walls, once it dies it might get loose and clog your filters. I wouldn’t try this with a modern diesel, but in really cold weather I added about ½ gallon of gasoline per

Re: Stus-List Silicone residue...

I used a product called mckanica silicone remover.  I highly recommend it!   Sent from my T-Mobile 4G LTE Device Original message From: Mpcbi via CnC-List Date: 11/5/17 8:09 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Mpcbi Subject: