Re: Stus-List Grenadine's Paint Job

2019-01-20 Thread Randy Stafford via CnC-List
Hi Rob, Have a look at https://drive.google.com/open?id=1hn4Q3iV-J0GIhiFUcDyGu0u-X_Dt5aDj. Your daughter will be pleased :) Cheers, Randy > On Nov 1, 2018, at 3:20 AM, Rob Ball wrote: > > Randy, > My daughter makes a point about chasing C owners to pitch them to make sure > they get the

Re: Stus-List 37+ Prop Pitch for Universal 35

2019-01-20 Thread Russ & Melody via CnC-List
Hi Chuck, I had a similar situation with my old cruising cutter with a Gori folding prop. At expected RPM the cruising speed was ugly and the engine chugged along like there was no load. Even worse, in a marina I learn to go full speed in reverse just to get a wee bite. In my

Re: Stus-List 37+ Prop Pitch for Universal 35

2019-01-20 Thread James Hesketh via CnC-List
I believe PYI keeps a data base of most boat/motor combinations and can advise you on what setting to use. Give them a shout see what they recommend. Chuck Saur wrote: > I have a MaxProp classic, and a Universal 35 on Daydream. The prop pitch > appears very shallow, and when motoring, seems to

Re: Stus-List 37+ Prop Pitch for Universal 35

2019-01-20 Thread Mark Baldridge via CnC-List
Chuck, I have the original M35 and a MaxProp classic 2-blade. I get 6.2 knots in calm water at 2200rpms. I'll look through my documents this week when I visit the boat and see if the pitch is mentioned. I'm replacing the cutlass bearing next month, so will check then when it is on the hard.

Re: Stus-List 37+ Prop Pitch for Universal 35

2019-01-20 Thread Rick Rohwer via CnC-List
I have the same prop but a Yanmar 35. Deep keel. Sounds very close to the same performance. I was looking to do the same tweaking on my next haul out. Looking forward to other opinions on the subject. I do love the difference under sail though compared to the fixed prop that was on the boat

Re: Stus-List 37+ Prop Pitch for Universal 35

2019-01-20 Thread schiller via CnC-List
Chuck, It was -6 (F) here in sunny SW Michigan this morning.  No need to go all the way to God's Country for cold. Neil Schiller 1983 C 35-3, #028, "Grace" Bloomingdale, Michigan On 1/20/2019 12:15 PM, Chuck Saur via CnC-List wrote: I have a MaxProp classic, and a Universal 35 on Daydream. 

Stus-List 37+ Prop Pitch for Universal 35

2019-01-20 Thread Chuck Saur via CnC-List
I have a MaxProp classic, and a Universal 35 on Daydream. The prop pitch appears very shallow, and when motoring, seems to be slow. (from memory of last September, 4.5 knots@ 2300rpms) Any 37+ owners have this combination of prop and engine, and happen to know the correct pitch for the MaxProp

Re: Stus-List Tablet for navigation

2019-01-20 Thread Russ & Melody via CnC-List
Hi Shawn, I used OpenCPN and Nobeltec quite a fews ago on the West Coast cruise. Main charts were NDI (digital ocean) and Nobeltec vr4. I did say old. I also had C-map 93, more for entertainment and back-up. Ran them on two XP machines, a Dell & ThinkPad. There is an OpenCPN chart download

Re: Stus-List Water system

2019-01-20 Thread Donald Kern via CnC-List
Yes, I have always disconnected the accumulator so it will drain out the bottom.  The one time i forgot it cracked and had to be replaced.  Also all my water lines can be opened for draining at their lowest point, just in forward of the engine. Don Kern Fireball C Mk2 Bristol, RI On

Re: Stus-List Water system

2019-01-20 Thread Josh Muckley via CnC-List
As long as the accumulator is an air bladder type then the bladder will expand and push all the water out and naturally prevent freezing. I've never done anything special. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Sat, Jan 19, 2019, 11:11 PM Marek Dziedzic via CnC-List <