Re: Stus-List Anyone have a prop?

I recently had my three blade Max-prop refurbished. My engine was running rough, so I thought it might have been the cutless bearing. While the boat was out of the water for bottom paint, the yard noticed the prop blades were wobbly and the shaft was worn, in addition to the worn cutless bearing.

Re: Stus-List Anyone have a prop?

Could you describe the problem you are experiencing with your prop? I want to be on guard for problems with mine. Have you talked to Hutch at PYI (Max Prop)? He may be able to help you with minimizing the out of service time. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Mon, May 27,

Re: Stus-List Anyone have a prop?

Keep in mind that your shaft was machined for the Maxi. Another prop may not fit. Alan Bergen 35 Mk iii thirsty Rose City YC Portland, OR On Mon, May 27, 2019 at 6:33 PM Chuck Saur via CnC-List < cnc-list@cnc-list.com> wrote: > Hello listers...anyone have a fixed three blade propeller, 16x9 RH

Stus-List Anyone have a prop?

Hello listers...anyone have a fixed three blade propeller, 16x9 RH for a 1 1/8 shaft? It's for my 37+ who has a problem with the Max Prop that is currently installed. I want to get a quick solution, and use the fixed blade for this year, while I send the MaxProp for reconditioning. Just hoping

Re: Stus-List Tree Trimming

Randy, I’d submit a request for a new handicap rating based on more weight aloft. :) Looks good. Dennis C. Sent from my iPhone > On May 27, 2019, at 7:12 PM, Randy Stafford via CnC-List > wrote: > > Listers remember this thread? Well, I executed the repair plat outlined > below.

Re: Stus-List Tree Trimming

Looks good. Doug Mountjoy Sv Rebecca Leah C LF39253-208-1412Port Orchard YC wa. Original message From: Randy Stafford via CnC-List Date: 5/27/19 17:12 (GMT-08:00) To: cnc-list Cc: Randy Stafford Subject: Re: Stus-List Tree Trimming Listers remember this thread?  Well, I

Re: Stus-List Tree Trimming

Listers remember this thread? Well, I executed the repair plat outlined below. Pictures at https://drive.google.com/open?id=11rBlluc2BCDxmjNYQSf7aFsJZBDlt3Dq . Many thanks to Dennis, as always. Cheers, Randy Stafford S/V

Re: Stus-List Oft overlooked source of head odor

Just did this…and as long as there is water above pump. No need to tightly seal. David F. Risch Gulf Stream Associates (401) 419-4650 From: CnC-List On Behalf Of bwhitmore via CnC-List Sent: Monday, May 27, 2019 7:24 AM To: cnc-list@cnc-list.com Cc: bwhitmore Subject: Re: Stus-List Oft

Re: Stus-List Oft overlooked source of head odor

Agreed Marek,Perhaps I didn't understand how others were teed into their sink drain.  What I have usually seen is a tee in the drain which leads to the toilet bowl (for example going to between the seat and the bowl.  The head is flushed normally most of the time, but when you want it flushed