Can you share any photos of the bolts in question? Are these above deck, or
below? I'm not aware of any aluminum bolts in my pedestal, but they may
have been replaced with stainless steel. There is one SS round head machine
screw that is loose and has no material left to grab (threads stripped
what to see at that museum
On Fri, Nov 19, 2021 at 3:37 PM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> Yes, but we unwashed gringos still have to provide a Covid test –
>
> O, but for the simpler days.
>
>
>
>
>
> Bill Coleman
>
> Entrada, Erie, PA
>
>
>
>
>
>
>
> *From:* ALAN
Stray dc current corrosion does not require connection to shore power.
See Stan Honey paper here:
http://honeynav.com/wp-content/uploads/2018/11/grounding.pdf
Dave Castor
Port Angeles, WA
On Fri, Nov 19, 2021 at 2:12 PM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> Some may
Some very useful info re: bonding systems here:
https://www.reddit.com/r/sailing/comments/onkot6/can_someone_explain_bonding_systems/
On Fri, Nov 19, 2021 at 6:11 PM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> Same bottom paint (Vivid) through all the relevant years. Dave
>
>
>
Same bottom paint (Vivid) through all the relevant years. Dave
> On Nov 19, 2021, at 6:05 PM, Donald Kern via CnC-List
> wrote:
>
> Dave,
>
> Did you change the bottom paint ?
> Many years ago I had the eating the anodes problem and what I determined was
> the bottom paint was conductive
Dave,
Did you change the bottom paint ?
Many years ago I had the eating the anodes problem and what I determined
was the bottom paint was conductive and was setting up hull surface
loops thru the paint. Further I found that all my bronze overboards had
connecting ground wire even though the
Dave- You may be on to something:
You may experience a kind of revolution in your psyche, a growth in awareness
that puts you in a position in which you know you must change your life in some
fundamental way. This could be associated with an experience that is
transforming in some way, either
You might need to change the name.
http://astrologyclub.org/aries-phase-seven-year-cycle/
Dave
On Fri, 19 Nov 2021 at 17:12, David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> Some may remember a Stump the Chumps post I made back in 2015. At that
> time, I had pulled the boat for
Some may remember a Stump the Chumps post I made back in 2015. At that time, I
had pulled the boat for the season and found that two of my three anodes were
gone, and the third barely present, which was something that had never happened
before. They were previously in such good shape that I
Yes John you do have a boat problem J
I assume the topside of the binnacle is good? Issue will be corrosion.
Stainless to aluminum is an issue. What are the bolts interacting with
below deck? Other thought is the aluminum bolts lasted many decades without
damage to the binnacle. Any luck
All,
I was aware that my bolts in my steering assembly below the pedestal were
failing when I noticed a gap on the bow side of the sheave assembly this
summer. After trying to tighten one of the aluminum bolts it crumbled. Had
two remaining good ones in the stern and limped the way through the
Yes, but we unwashed gringos still have to provide a Covid test –
O, but for the simpler days.
Bill Coleman
Entrada, Erie, PA
From: ALAN BERGEN via CnC-List [mailto:cnc-list@cnc-list.com]
Sent: Friday, November 19, 2021 2:16 PM
To: C
Cc: ALAN BERGEN
Subject: Stus-List Marine
I received this invitation in the mail today:
You are cordially invited to attend our special Open House event on Monday
6 December from 5 to 7pm at 55 Ontario St., Kingston, Ontario.
Thanks to your generous support, we are delighted to announce that the
Marine Museum has moved home and our
13 matches
Mail list logo
