On Mon, Apr 18, 2022 at 4:57 AM dwight veinot via CnC-List <
cnc-list@cnc-list.com> wrote:
> Dennis. Your messages to the list come to me with a yellow warning. I
> don't understand why. You been posting good information for many years on
> the C list. The warning has appeared on you recent
Thanks for all the replies.
I was able to fairly easily turn the starboars SS rod that is inside the
boat. The head rotated inside the aluminum block without much resistance. 1
1/2 turns did the trick and got it as tight as the port side rod.
I backed off the nuts on the brass bolts that pass
Today is the last day to get your custom C cutting board with free
boat name and font. A savings of up to $8.00
Order form is on the C Photo Album site -- http://www.cncphotoalbum.com/
Stu
This is really something to think about when boat shopping. For the C 40
that I looked at and passed on because of hard grounding damage, the local
riggers basically would not inspect the rig at all. They all told me more or
less “it’s old, it needs replacing, we’ll probably damage fittings we
Just replaced 30 year old wire on my Hylas. Everything still looked great
until we removed the furler drum. There was a LOT of corrosion under the
furler.
I've been told that for salt water boats the rod needs to be inspected and
reheaded every 10 years and wire should be replaced at ten years
Annapolis Rigging. Did a great job on mine.
https://annapolisrigging.com
Neil
C 32 FoxFire (for sale)
Rock Hall, MD
484-354-8800
Neil Andersen
Rock Hall, MD 21661
484-354-8800
From: nausetbeach--- via CnC-List
Sent: Sunday, April 17, 2022 2:43:21 PM
To:
Sort of. I sailed my own boat for 30 years before I replaced the rod rigging.
I still have the original backstay which I re-headed. The cost of doing an
inspection on rod is prohibitively expensive. In my opinion it is more cost
effective to replace it rather than pay to have it
I had mine inspected in 2010 or so. Other than some re-headed work everything
checked out. The mast and rigging were down for 10 years (long story) but all
went back up and are solid since 2018.
Neil
1982 C 32 (For Sale)
Rock Hall, MD
484-354-8800
Neil Andersen
Rock Hall, MD 21661
Thank you to all who responded. Sounds like butyl is the unanimous
recommendation for this application. I have some "bed-it" laying around
somewhere, but as I recall it is thin and not very wide, and only comes in
one size. I probably need something thicker and wider for this application.
Andrew; were you referring to the C 40 or your current boat? Can you give
some idea of the price ranges you were given? Thanks
Richard
s/v Bushmark4: 1985 C 37 CB; Ohio River, Mile 596
Richard N. Bush Law Offices
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
When I got my new 25-year old boat, I had the rig pulled and disassembled
it. I had a good look at all the rod and it looked fine. Nevertheless, it
all went to Rig Pro--arguably the best in the world at rigging--for a
thorough inspection and assessment and, knowing that I'm on a budget that
So basically any boat with rod rigging older than 2002 would need all new
standing rigging?
Joe
Coquina
From: MICHAEL BRANNON via CnC-List
Sent: Monday, April 18, 2022 9:36 AM
To: Stus-List
Cc: MICHAEL BRANNON
Subject: [EXTERNAL] Stus-List Re: Recommendation: Osprey Composites -
Herrington
As a rigger I would go with Charlie Nelson’s recommendation. To do a thought
inspection of rod rigging it needs to be completely disassembles and the cold
head looked at closely and possible NDT’d to ensure there are no cracks. At
almost 20 years old you most likely need to replace it.
I highly recommend Osprey! They've done work on my last two boats. Not
cheap, but top quality work!
Can't help on the rod. When I needed help with my Edson steering, Edson
recommended M Yachts, but I've never used their rigging services.
Joel
On Sun, Apr 17, 2022 at 4:37 PM cenelson--- via
Hello all,
I've had 2 recent successes that might be helpful to know about. The first
came about because I could not find spray SailKote for an extended period
of time, even here in St. Pete, FL. Even West Marine didn't have any in
stock. I had used "Super Slick Stuff" spray at home (available
Dennis. Your messages to the list come to me with a yellow warning. I don't
understand why. You been posting good information for many years on the C
list. The warning has appeared on you recent posts.
On Tue, Mar 22, 2022 at 3:51 PM Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> Some
16 matches
Mail list logo
